68 Burb... here we go!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jmedero · 09-18-2010, 10:14 PM

well I got my butt in the garage today and started removing, cutting, grinding off all the stuff in my way to start bolting my rear stuff on. I do have a question on removing the rear wheel tubs. To remove them am I going to have to cut them out? I removed all the bolts around the base of the tub but I only see a seam that is sealed that runs the length of the tub. Is that were it is mounted by? Any removal ideas? I have pics that I will post up tomorrow I just want to clean up the mess so I can snap some photos.
Thanks guys.
Juan

VA72C10 · 09-18-2010, 10:33 PM

cool...glad you're working on it. I believe there is a seam sealer in between that's holding them together but they come apart...the trucks are like that.

**Hart_Rod** · 09-18-2010, 11:06 PM

Quote:

Originally Posted by jmedero

I do have a question on removing the rear wheel tubs. To remove them am I going to have to cut them out?
Juan

Unfortunately, yes.....

.

VA72C10 · 09-18-2010, 11:20 PM

Quote:

Originally Posted by Hart_Rod

Unfortunately, yes.....

.

dang...guess that's a burb thing...

jmedero · 09-18-2010, 11:41 PM

Looks like the inner skin of the wheel well and the quarter panel join together. I wonder what that cut will look like..... And the fitment of the tub will fit in there.
Posted via Mobile Device

**Hart_Rod** · 09-19-2010, 08:49 AM

Quote:

Originally Posted by jmedero

Looks like the inner skin of the wheel well and the quarter panel join together. I wonder what that cut will look like..... And the fitment of the tub will fit in there.
Posted via Mobile Device

Look at Frizzle Fry's Tahoe build. He did what you're talking about and has a lot of good pictures.

EDIT: Start looking at post #511, http://67-72chevytrucks.com/vboard/s...239896&page=13
R/

**kev2809** · 09-19-2010, 04:29 PM

lookin forward to see that rear end layed out! i may have missed it earlier, but did you get the pb trailing arms too? and were you gonna cup your lca's?

jmedero · 09-19-2010, 06:19 PM

keV yes I got the pb rear kit with shock bar, panhard, bridge and trailing arms. I had a sectioned front crossmember that I was going to sell. I was planing on running a dm but now I'm not sure. I will be installing the sectioned crossmember and just trim down my spring cups. Let's see were that gets me.
Posted via Mobile Device

jmedero · 09-20-2010, 12:04 AM

here are a few pics of some of the progress. I have removed everything that will be in my way. I took it all out from the trans to the rear bumper. I left the crossmember thats infront of the gas tank and the one behind it.

Frizzle Fry · 09-22-2010, 12:43 PM

Quote:

Originally Posted by Hart_Rod

Look at Frizzle Fry's Tahoe build. He did what you're talking about and has a lot of good pictures.

EDIT: Start looking at post #511, http://67-72chevytrucks.com/vboard/s...239896&page=13
R/

With default posts-per-page settings it's on page 21.

.

jmedero · 09-22-2010, 04:37 PM

Thanks frizzle just what I needed.
Posted via Mobile Device

1ATony · 09-23-2010, 04:14 PM

Looks pretty good

jmedero · 11-28-2010, 02:49 AM

ok well I have been working on it for the last couple of days. If I could go back to when I ordered the stuff I would have gotten the bolt in kit. Main reason I did not was Nate said I would have to cut more of my floor out and I did not want to... well... that plan went to pot. I got 90% of it done. I will be placing the rear end in place with the PB arms so I can line up and weld my bag plates on the rear end. I am still trying to figure out the panhard bar mount that welds on to the frame... Ill get it. Here are some pics of what has been done this weekend. I hope to have it rolling by the end of the year.... I guess time will tell. Enjoy.

jmedero · 11-28-2010, 02:54 AM

sorry that last pic was a little small. LOL

oh well I cant get it worked out... tired... brain not working.

**kev2809** · 11-28-2010, 11:34 AM

looking good man. you did better removing your tubs than me..
they are still in my truck lol

Average Joe · 11-28-2010, 01:58 PM

Lookin' good!

VA72C10 · 11-28-2010, 04:33 PM

Especially looks good in the little pic

jmedero · 12-31-2010, 01:40 AM

I'll post pics in the am but I just put her down on all 4's for the first time in a long while. She is LOW!! Lol. I need to roll her out of the garage and do some cleaning in the garage. Still need to weld in my panhard, then clean it all up and paint it. I'm getting excited!!!!
Posted via Mobile Device

jmedero · 01-08-2011, 01:03 AM

well here is a quick photo. She will be out of the garage for the first time in 5 mths in the morning. I am so excited!! Also a picture of the wheels I want... $550 a wheel!!! wowza..... lol. and thats just a 20x9.5 wheel.
Later

Delmo · 01-08-2011, 01:19 PM

Man I love this thing.

likaroc13 · 01-09-2011, 12:44 AM

looking good, Juan...those wheels would look great, but i feel ya on the pain ($$$), haha

jmedero · 01-09-2011, 12:53 AM

Hey dude how are you doing? I got the smoothies today so no bonnevilles for me. Hope all is well with you guys. I sold my 66 today.... Sad and happy all at the same time. I'm going to sell te 63 to keep funding the Burb.

Thanks delmo I appreciate it. Just trying to keep up a bit with you and dino!!!
Posted via Mobile Device

likaroc13 · 01-09-2011, 10:11 PM

Quote:

Originally Posted by jmedero

Hey dude how are you doing? I got the smoothies today so no bonnevilles for me. Hope all is well with you guys. I sold my 66 today.... Sad and happy all at the same time. I'm going to sell te 63 to keep funding the Burb.

Thanks delmo I appreciate it. Just trying to keep up a bit with you and dino!!!
Posted via Mobile Device

i'm pretty good, how bout you? glad to hear you got the Smoothies...that was a nice deal! i have a custom wheel idea using those, but it will be for a future project...do you have pics of the '66 or '63? i know you hate to see them go, but that Burb will make a sweet family ride

*project 67 sub* · 01-09-2011, 10:20 PM

looking good bro i like it.

**kev2809** · 01-09-2011, 10:27 PM

looks good sitting that low. you get a chance to roll it out and get a shot of the front?

09-18-2010, 10:33 PM	#52
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 68 Burb... here we go!! cool...glad you're working on it. I believe there is a seam sealer in between that's holding them together but they come apart...the trucks are like that. __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-18-2010, 11:41 PM	#55
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! Looks like the inner skin of the wheel well and the quarter panel join together. I wonder what that cut will look like..... And the fitment of the tub will fit in there. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-19-2010, 04:29 PM	#57
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: 68 Burb... here we go!! lookin forward to see that rear end layed out! i may have missed it earlier, but did you get the pb trailing arms too? and were you gonna cup your lca's? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-19-2010, 06:19 PM	#58
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! keV yes I got the pb rear kit with shock bar, panhard, bridge and trailing arms. I had a sectioned front crossmember that I was going to sell. I was planing on running a dm but now I'm not sure. I will be installing the sectioned crossmember and just trim down my spring cups. Let's see were that gets me. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-20-2010, 12:04 AM	#59
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! here are a few pics of some of the progress. I have removed everything that will be in my way. I took it all out from the trans to the rear bumper. I left the crossmember thats infront of the gas tank and the one behind it. Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-18-2010, 10:14 PM	#51
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! well I got my butt in the garage today and started removing, cutting, grinding off all the stuff in my way to start bolting my rear stuff on. I do have a question on removing the rear wheel tubs. To remove them am I going to have to cut them out? I removed all the bolts around the base of the tub but I only see a seam that is sealed that runs the length of the tub. Is that were it is mounted by? Any removal ideas? I have pics that I will post up tomorrow I just want to clean up the mess so I can snap some photos. Thanks guys. Juan __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-22-2010, 04:37 PM	#61
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! Thanks frizzle just what I needed. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-23-2010, 04:14 PM	#62
1ATony Registered User Join Date: Oct 2009 Location: Pepperell,Mass Posts: 724	Re: 68 Burb... here we go!! Looks pretty good

11-28-2010, 02:49 AM	#63
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! ok well I have been working on it for the last couple of days. If I could go back to when I ordered the stuff I would have gotten the bolt in kit. Main reason I did not was Nate said I would have to cut more of my floor out and I did not want to... well... that plan went to pot. I got 90% of it done. I will be placing the rear end in place with the PB arms so I can line up and weld my bag plates on the rear end. I am still trying to figure out the panhard bar mount that welds on to the frame... Ill get it. Here are some pics of what has been done this weekend. I hope to have it rolling by the end of the year.... I guess time will tell. Enjoy. Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-28-2010, 02:54 AM	#64
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! sorry that last pic was a little small. LOL oh well I cant get it worked out... tired... brain not working. Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084 Last edited by jmedero; 11-28-2010 at 02:55 AM. Reason: blah blah blah

11-28-2010, 11:34 AM	#65
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: 68 Burb... here we go!! looking good man. you did better removing your tubs than me.. they are still in my truck lol __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-28-2010, 01:58 PM	#66
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 68 Burb... here we go!! Lookin' good!

11-28-2010, 04:33 PM	#67
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 68 Burb... here we go!! Especially looks good in the little pic __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-31-2010, 01:40 AM	#68
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! I'll post pics in the am but I just put her down on all 4's for the first time in a long while. She is LOW!! Lol. I need to roll her out of the garage and do some cleaning in the garage. Still need to weld in my panhard, then clean it all up and paint it. I'm getting excited!!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-08-2011, 01:03 AM	#69
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! well here is a quick photo. She will be out of the garage for the first time in 5 mths in the morning. I am so excited!! Also a picture of the wheels I want... $550 a wheel!!! wowza..... lol. and thats just a 20x9.5 wheel. Later Attached Images __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

01-08-2011, 01:19 PM	#70
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: 68 Burb... here we go!! Man I love this thing.

01-09-2011, 12:44 AM	#71
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 68 Burb... here we go!! looking good, Juan...those wheels would look great, but i feel ya on the pain ($$$), haha

01-09-2011, 12:53 AM	#72
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 68 Burb... here we go!! Hey dude how are you doing? I got the smoothies today so no bonnevilles for me. Hope all is well with you guys. I sold my 66 today.... Sad and happy all at the same time. I'm going to sell te 63 to keep funding the Burb. Thanks delmo I appreciate it. Just trying to keep up a bit with you and dino!!! Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-09-2011, 10:20 PM	#74
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 68 Burb... here we go!! looking good bro i like it.

01-09-2011, 10:27 PM	#75
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,133	Re: 68 Burb... here we go!! looks good sitting that low. you get a chance to roll it out and get a shot of the front? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.