Project: 1967 C10 Small Window - The 1947 - Present Chevrolet & GMC Truck Message Board Network

David67 · 08-08-2010, 08:03 PM

I've finally decided to make a build thread. I got this very solid '67 c10 stepside back in early January from 62ls1 (who has been TREMENDOUS help throughout the build) with the plans of doing a full frame off restorod. I'll let you know what's going on as I post pictures.

David67 · 08-08-2010, 08:07 PM

It came with a factory 4-speed

behind a 292 L6. Plans are to rebuild the engine.

David67 · 08-08-2010, 08:11 PM

We began by taking the bed off with the plans of rebuilding the whole rear section first including the chassis, 12-bolt rear end, suspension, etc.

David67 · 08-08-2010, 08:18 PM

Once the rear half of the chassis was taken down to bare metal using a grinder with a wire brush and a sandblaster, it was primed and I began to tear apart the rear. At this point the chassis and truck as a whole were looking very solid with only minor pitting on the frame where the bed had been resting.

David67 · 08-08-2010, 08:22 PM

Quote:

Originally Posted by JRBECK64

Looks like a great truck to rebuild. What are your plans, are you going to stay stock or what?

JRBECK64

Well I'm not planning on anything crazy custom and I want to keep that classic look. I'm doing a 4/6 drop, wheels, some engine mods but other than that not much more.....at least I don't think right now

Quote:

Originally Posted by C/10 King

You're off to a fantastic start, very nice truck, 67' small back windows are hot! hot! hot!

Thanks C/10 King! Yeah I agree, they're my favorite!

David67 · 08-08-2010, 08:26 PM

We pulled out the differential and replaced all the seals and bearings as well as just cleaned everything up.

JRBECK64 · 08-08-2010, 08:10 PM

Looks like a great truck to rebuild. What are your plans, are you going to stay stock or what?

JRBECK64

C/10 King · 08-08-2010, 08:12 PM

You're off to a fantastic start, very nice truck, 67' small back windows are hot! hot! hot!

Shyguy · 08-08-2010, 09:20 PM

Everything looking great so far. I am interested in this build because this fall I hope to start working on my '67 swb stepper with a 250 and 4 speed.

David67 · 08-08-2010, 09:21 PM

Quote:

Originally Posted by Shyguy

Everything looking great so far. I am interested in this build because this fall I hope to start working on my '67 swb stepper with a 250 and 4 speed.

Thanks a lot and very nice!! What are your plans for it?

David67 · 08-08-2010, 09:25 PM

And at last everything came together. This is pretty much where we are right now except we have the steering linkages in and the PS box as well as a few brake lines.

David67 · 08-08-2010, 09:31 PM

In order for the PS box to fit, the frame had to be modified which for us involved cutting out the spot and welding in another plate. Also, the radiator bracket had to be trimmed down.

tantrumpipeline · 08-08-2010, 09:26 PM

I'm in, wanna see this one

Shyguy · 08-08-2010, 09:30 PM

I am thinking about going mostly for a stock look on the '67. It will require a lot of rust repair work to get it to the stock look. I want to use it to cruise the back roads and small towns around here. I really like the 250 with the 4 speed.

I have a '71 with a 454 and 4 speed that will get more of a custom build, but that is in the far future since it is my work truck for now.

David67 · 08-08-2010, 09:34 PM

Quote:

Originally Posted by Shyguy

I am thinking about going mostly for a stock look on the '67. It will require a lot of rust repair work to get it to the stock look. I want to use it to cruise the back roads and small towns around here. I really like the 250 with the 4 speed.

I have a '71 with a 454 and 4 speed that will get more of a custom build, but that is in the far future since it is my work truck for now.

Very cool I can't wait to see how that goes once you get into it.

David67 · 08-08-2010, 09:47 PM

Oops. Can a moderator please move this to projects and builds?

**68 Stepside** · 08-09-2010, 03:17 PM

Quote:

Originally Posted by David67

Oops. Can a moderator please move this to projects and builds?

Moved, per your request. Awesome work thus far on that project, makes me want to get going on mine again.

Slick67 · 08-09-2010, 06:26 PM

I'm subscribed! That frame looks killer. You are right....the TT2's look great on anything. If you want to powder coat some small stuff, give me a call.

Oh yeah....it took me a while to read all those options on the SPID!!! : )

TheSeeker · 08-08-2010, 09:56 PM

must be nice to have all that money laying around.

darkhorse970 · 08-09-2010, 06:57 AM

You are making greatprogress on this build! I'm anxious to see it done.

David67 · 08-09-2010, 02:28 PM

Here's all the steering linkages and I forgot to mention I converted the rear to 5-lug using a kit from CPP which included the axles(which I painted with high temp caliper paint), studs, new differential cover gasket, and the 5 lug drums. It was so humid that the camera lens kept fogging up and I'd have to wipe it off. That's why the pics are a little hazy.

David67 · 08-09-2010, 02:29 PM

...

David67 · 08-09-2010, 02:31 PM

Quote:

Originally Posted by darkhorse970

You are making greatprogress on this build! I'm anxious to see it done.

Thank you! same here

David67 · 08-09-2010, 02:41 PM

Oh yeah...this thing's loaded

...anyways I think it'd be cool to leave the inner glove box door completely untouched.

franky69c10 · 08-10-2010, 04:25 PM

Lookn good

08-08-2010, 08:03 PM	#1
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Project: 1967 C10 Small Window I've finally decided to make a build thread. I got this very solid '67 c10 stepside back in early January from 62ls1 (who has been TREMENDOUS help throughout the build) with the plans of doing a full frame off restorod. I'll let you know what's going on as I post pictures. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67 Last edited by David67; 01-04-2017 at 04:56 PM.

08-08-2010, 08:07 PM	#2
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window It came with a factory 4-speed behind a 292 L6. Plans are to rebuild the engine. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67 Last edited by David67; 01-04-2017 at 04:57 PM.

08-08-2010, 08:11 PM	#3
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window We began by taking the bed off with the plans of rebuilding the whole rear section first including the chassis, 12-bolt rear end, suspension, etc. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 08:18 PM	#4
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Once the rear half of the chassis was taken down to bare metal using a grinder with a wire brush and a sandblaster, it was primed and I began to tear apart the rear. At this point the chassis and truck as a whole were looking very solid with only minor pitting on the frame where the bed had been resting. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 08:26 PM	#6
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window We pulled out the differential and replaced all the seals and bearings as well as just cleaned everything up. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 08:10 PM	#7
JRBECK64 Registered User Join Date: Sep 2008 Location: Cornelius Oregon Posts: 1,073	Re: Project: 1967 C10 Small Window Looks like a great truck to rebuild. What are your plans, are you going to stay stock or what? JRBECK64

08-08-2010, 08:12 PM	#8
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Project: 1967 C10 Small Window You're off to a fantastic start, very nice truck, 67' small back windows are hot! hot! hot! __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

08-08-2010, 09:20 PM	#9
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Project: 1967 C10 Small Window Everything looking great so far. I am interested in this build because this fall I hope to start working on my '67 swb stepper with a 250 and 4 speed. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

08-08-2010, 09:25 PM	#11
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window And at last everything came together. This is pretty much where we are right now except we have the steering linkages in and the PS box as well as a few brake lines. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 09:31 PM	#12
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window In order for the PS box to fit, the frame had to be modified which for us involved cutting out the spot and welding in another plate. Also, the radiator bracket had to be trimmed down. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-08-2010, 09:26 PM	#13
tantrumpipeline Master Procrastinator Join Date: Sep 2009 Location: Grande Prairie AB Canada Posts: 1,128	Re: Project: 1967 C10 Small Window I'm in, wanna see this one __________________ My Buildhttp://67-72chevytrucks.com/vboard/s...d.php?t=395506 20 Duramax tow pig 68 2wd short stepper project 77 2wd short fleet beater 52 short project

08-08-2010, 09:30 PM	#14
Shyguy Junior Member Join Date: Dec 2006 Location: Southeast Missouri Posts: 2,436	Re: Project: 1967 C10 Small Window I am thinking about going mostly for a stock look on the '67. It will require a lot of rust repair work to get it to the stock look. I want to use it to cruise the back roads and small towns around here. I really like the 250 with the 4 speed. I have a '71 with a 454 and 4 speed that will get more of a custom build, but that is in the far future since it is my work truck for now. __________________ '67 Chevy C-20 short stepper - build complete, 454/SM-465. '75 C-30 Single Cab DRW-350 small block/NP-435. '77 GMC-6500 Dump Truck, 427 Tall Deck. '92 GMC K-3500 Duallie, 454/4L80E.

08-08-2010, 09:47 PM	#16
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Oops. Can a moderator please move this to projects and builds? __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-09-2010, 06:26 PM	#18
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project: 1967 C10 Small Window I'm subscribed! That frame looks killer. You are right....the TT2's look great on anything. If you want to powder coat some small stuff, give me a call. Oh yeah....it took me a while to read all those options on the SPID!!! : ) __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed" Last edited by Slick67; 08-09-2010 at 06:27 PM.

08-08-2010, 09:56 PM	#19
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Re: Project: 1967 C10 Small Window must be nice to have all that money laying around.



Register or Log In To remove these advertisements.

08-09-2010, 06:57 AM	#20
darkhorse970 Registered User Join Date: May 2009 Location: Monroe, LA Posts: 2,103	Re: Project: 1967 C10 Small Window You are making greatprogress on this build! I'm anxious to see it done. __________________ Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941

08-09-2010, 02:28 PM	#21
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Here's all the steering linkages and I forgot to mention I converted the rear to 5-lug using a kit from CPP which included the axles(which I painted with high temp caliper paint), studs, new differential cover gasket, and the 5 lug drums. It was so humid that the camera lens kept fogging up and I'd have to wipe it off. That's why the pics are a little hazy. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-09-2010, 02:29 PM	#22
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window ... Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-09-2010, 02:41 PM	#24
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window Oh yeah...this thing's loaded ...anyways I think it'd be cool to leave the inner glove box door completely untouched. Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

08-10-2010, 04:25 PM	#25
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Project: 1967 C10 Small Window Lookn good __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.