1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1) - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

awbrown · 01-16-2012, 11:03 PM

Maybe for your next project you can put a 4x4 frame under the caprice???

E911manager · 01-18-2012, 07:55 PM

Quote:

Originally Posted by awbrown

Maybe for your next project you can put a 4x4 frame under the caprice???

Hmmm cummins powered caprice with a 5 inch stack sticking out of the trunk. Paint it "BudLight" Blue. Sweeeeeet

Posted via Mobile Device

E911manager · 01-18-2012, 10:05 PM

Did some work on the firewall. After a great recommendation I am going to fill the last hole where the heater was at and smooth it all out then route the lines elsewhere..

nomrlz · 01-18-2012, 10:41 PM

nice work! i love my 95 roadmaster wagon. these chassis are great platforms and can do it all from hauling to hauling azz.

**66ChevyMax** · 01-18-2012, 11:11 PM

Bro you're a madman. Great job
Posted via Mobile Device

E911manager · 01-19-2012, 07:08 PM

Thanks madmax... I think..

I am changing the name of my build to better reflect. I think it better reflects what I am doing...

**66ChevyMax** · 01-19-2012, 08:33 PM

I like the new name

Quote:

Originally Posted by E911manager

Thanks madmax... I think..

I am changing the name of my build to better reflect. I think it better reflects what I am doing...

Posted via Mobile Device

awbrown · 01-19-2012, 10:00 PM

Didn't know you could do that..............

**66ChevyMax** · 01-19-2012, 11:37 PM

Admin's will change it for you.

Quote:

Originally Posted by awbrown

Didn't know you could do that..............

**chevy_man5** · 01-19-2012, 11:42 PM

I don't think it stuck, I only see a couple with the new name.

E911manager · 01-20-2012, 11:40 AM

I sent a request to the webmaster. We will see what happens..

michael bagby · 01-21-2012, 02:57 AM

just read ur build its close to mine a 61 sb bbw on a 74 olds cutlass supreme frame i centered back wheels first then mount cab not gonna cut frame @ front of cab but i am gonna cut front fenders to realign center leave bumpers off custom build front air dam off of reworked fenders w/ a rear roll pan & tilt front clip had this truck since i was 15 im 43 now

oh yeah subscribed i wanna see how this turns out 4 u

E911manager · 01-21-2012, 11:02 AM

Quote:

Originally Posted by michael bagby

just read ur build its close to mine a 61 sb bbw on a 74 olds cutlass supreme frame i centered back wheels first then mount cab not gonna cut frame @ front of cab but i am gonna cut front fenders to realign center leave bumpers off custom build front air dam off of reworked fenders w/ a rear roll pan & tilt front clip had this truck since i was 15 im 43 now

oh yeah subscribed i wanna see how this turns out 4 u

The 78-96 caprices are all pretty much the same. The cutlas is probably shorter but a custom front will look sweet. I hope to finish the firewall this weekend and get it mounted on the truck. But the weather has to cooperate...
Posted via Mobile Device

**Dieselwrencher** · 01-21-2012, 08:19 PM

Great work on your truck! That's too bad on the a/c not fitting in there. But it'll be a more clean and easier install with an aftermarket kit.

firefighter736 · 01-23-2012, 10:55 AM

Quote:

Originally Posted by E911manager

Next goal.... Started before March 1st!!! We shall see.
Posted via Mobile Device

As fast as you work I wouldn't be surprised to see it started before Feb 1st!

E911manager · 01-29-2012, 11:45 AM

Quote:

Originally Posted by firefighter736

As fast as you work I wouldn't be surprised to see it started before Feb 1st!

Body work and weather has slowed me way down!!!

Posted via Mobile Device

E911manager · 01-30-2012, 08:46 PM

Boy, I am tired of body work already. I would rather be fab'ing up the frame... The firewall, dash and windshield area are ready for primer. All of the holes in the firewall are filled. It turned out pretty good. I hope to prime it tomorrow or the next day so I can sit the cab back down and pray it still fits..

Painted the bottom half with POR15. So the top will be body color and the bottom will be gloss black. Not sure how that will look but it will be different...

E911manager · 01-30-2012, 08:54 PM

Fused the clutch pedal to the caprice pedal assembly. The hole above the switches where the washers are welded on is the top mount. The caprice used the very top hole but mine is now on the side. Welded the nut on the back side and two washers for spacing.

The caprice assembly swings to the right of the column and the clutch pedal was used to swing it directly under the steering column.

sweeeeetnesssss!!!

72GMCK-2500 · 01-30-2012, 09:17 PM

Nice firewall work! The Caprick-up, LOL, is really coming along! Gotta love those old 9C1's! My dad has used a toilet bowl (throttle body) injected 9C1 350 in his long gone 66 C-10 longbed and a fuel injected 9c1 350 in his 64 C-10 stepside. He absolutly loved the fuel injected one. And of course i still have a 88 9C1 caprice that is gonna be restored some day. For now shes a daily driver/parts runner!

E911manager · 01-30-2012, 09:44 PM

Quote:

Originally Posted by E911manager

Used a 1.5" X 3" rectangle tubing for the cross support and cut the caprice frame to fit. It appears another 1.5" X 3" welded vertically to the bottom will be about right to mount the main bumper mounts. The grill mount will need some modification where is attaches under the radiator mount but that appear to be about it. Actually the curve of the caprice frame runs at the proper angle to connect the outer bumper mounts. Probably done until next Saturday...

Quote:

Originally Posted by E911manager

Well after much and much searching and buying, the project is underway. i have the body of the 94 Chevrolet Caprice 9C1 ready to remove. I also purchased a 64 truck locally that has all the metal work done and almost ready for paint.

Quote:

Originally Posted by 72GMCK-2500

Nice firewall work! The Caprick-up, LOL, is really coming along! Gotta love those old 9C1's! My dad has used a toilet bowl (throttle body) injected 9C1 350 in his long gone 66 C-10 longbed and a fuel injected 9c1 350 in his 64 C-10 stepside. He absolutly loved the fuel injected one. And of course i still have a 88 9C1 caprice that is gonna be restored some day. For now shes a daily driver/parts runner!

The motors a great and I hope the frame and suspension rides as good as I hope.

The Caprick-up name came from a friend that has been following the build.
Posted via Mobile Device

E911manager · 02-03-2012, 12:26 AM

Mounted the Cab back on the frame. Almost ready to start running wiring..

64shortbox · 02-03-2012, 01:59 AM

Looking Good!!!!

E911manager · 02-06-2012, 03:23 PM

I didn't get much done this weekend... But I did manage to sit the bed back down on the frame. It is about 1/4 of an inch low but that was planned so I can shim it into place. Measuring 5 times, cutting halfway stopping and measuring three more times seemed to have payed off.

**66ChevyMax** · 02-06-2012, 03:28 PM

What caprice I don't see a caprice

E911manager · 02-06-2012, 03:34 PM

Quote:

Originally Posted by 66ChevyMax

What caprice I don't see a caprice

and for my next trick....

Watch me turn this LT1 into a LS3!!!

01-16-2012, 11:03 PM	#126
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 Maybe for your next project you can put a 4x4 frame under the caprice???

01-18-2012, 10:05 PM	#128
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 Did some work on the firewall. After a great recommendation I am going to fill the last hole where the heater was at and smooth it all out then route the lines elsewhere.. Attached Images __________________ My Build CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

01-18-2012, 10:41 PM	#129
nomrlz Registered User Join Date: Jan 2010 Location: Wataga,IL Posts: 666	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 nice work! i love my 95 roadmaster wagon. these chassis are great platforms and can do it all from hauling to hauling azz.

01-18-2012, 11:11 PM	#130
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 Bro you're a madman. Great job Posted via Mobile Device __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

01-19-2012, 07:08 PM	#131
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Thanks madmax... I think.. I am changing the name of my build to better reflect. I think it better reflects what I am doing... __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

01-19-2012, 10:00 PM	#133
awbrown Registered User Join Date: Aug 2009 Location: Detroit MI Posts: 1,209	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 Didn't know you could do that..............

01-19-2012, 11:42 PM	#135
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 I don't think it stuck, I only see a couple with the new name. __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

01-20-2012, 11:40 AM	#136
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 I sent a request to the webmaster. We will see what happens.. __________________ My Build CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

01-21-2012, 02:57 AM	#137
michael bagby Registered User Join Date: Dec 2008 Location: k.c. ks. Posts: 39	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 just read ur build its close to mine a 61 sb bbw on a 74 olds cutlass supreme frame i centered back wheels first then mount cab not gonna cut frame @ front of cab but i am gonna cut front fenders to realign center leave bumpers off custom build front air dam off of reworked fenders w/ a rear roll pan & tilt front clip had this truck since i was 15 im 43 now oh yeah subscribed i wanna see how this turns out 4 u

01-21-2012, 08:19 PM	#139
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,134	Re: 64 chevy swb on a 94 chevy caprice frame w/ lt1 Great work on your truck! That's too bad on the a/c not fitting in there. But it'll be a more clean and easier install with an aftermarket kit. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-30-2012, 08:46 PM	#142
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Boy, I am tired of body work already. I would rather be fab'ing up the frame... The firewall, dash and windshield area are ready for primer. All of the holes in the firewall are filled. It turned out pretty good. I hope to prime it tomorrow or the next day so I can sit the cab back down and pray it still fits.. Painted the bottom half with POR15. So the top will be body color and the bottom will be gloss black. Not sure how that will look but it will be different... Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

01-30-2012, 08:54 PM	#143
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Fused the clutch pedal to the caprice pedal assembly. The hole above the switches where the washers are welded on is the top mount. The caprice used the very top hole but mine is now on the side. Welded the nut on the back side and two washers for spacing. The caprice assembly swings to the right of the column and the clutch pedal was used to swing it directly under the steering column. sweeeeetnesssss!!! Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

01-30-2012, 09:17 PM	#144
72GMCK-2500 Registered User Join Date: Feb 2011 Location: West Chester Pa. Posts: 195	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Nice firewall work! The Caprick-up, LOL, is really coming along! Gotta love those old 9C1's! My dad has used a toilet bowl (throttle body) injected 9C1 350 in his long gone 66 C-10 longbed and a fuel injected 9c1 350 in his 64 C-10 stepside. He absolutly loved the fuel injected one. And of course i still have a 88 9C1 caprice that is gonna be restored some day. For now shes a daily driver/parts runner! __________________ 1947 Chev 3600, 454,th350,9"ford tubbed (Pop's ride) 1965 GMC 1000 305E V6, Powerglide. GONE 1972 GMC K-2500 350, 4 speed, 229,000 miles 1988 Chevrolet Caprice 9C1 Ex cop car, 350, 700r4. 1997 Ford F-350 4x4 XLT (The Hauler) 7.3 diesel. RUST NEVER SLEEPS

02-03-2012, 12:26 AM	#146
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) Mounted the Cab back on the frame. Almost ready to start running wiring.. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-03-2012, 01:59 AM	#147
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 731	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1)** Looking Good!!!!



Register or Log In To remove these advertisements.

02-06-2012, 03:23 PM	#148
E911manager Registered User Join Date: Oct 2011 Location: Blanchard Oklahoma Posts: 424	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) I didn't get much done this weekend... But I did manage to sit the bed back down on the frame. It is about 1/4 of an inch low but that was planned so I can shim it into place. Measuring 5 times, cutting halfway stopping and measuring three more times seemed to have payed off. Attached Images __________________ My Build** CAPRICKUP 1964 Chevy SWB on a 94 Caprice http://67-72chevytrucks.com/vboard/s...d.php?t=492640

02-06-2012, 03:28 PM	#149
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	*Re: 1964 Caprick-up = (C10+SWB)(94 Caprice 9C1+LT1) What caprice I don't see a caprice __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride** http://67-72chevytrucks.com/vboard/s...=1#post4989763

Register or Log In To remove these advertisements.