Oil pressure sending unit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 07-20-2012, 04:11 PM

I've got a 2003 Yukon XL with the 6.0 and automatic. My gage is pegged high on the oil pressure gage. Can someone direct me where to look for the sending unit for this? A pic would be nice, but a good description would probably work. I'm not sure if it's the gage or the sending unit or something else, but I don't even know where to look right now.

clinebarger · 07-20-2012, 07:44 PM

The sender is behind the intake...pic.

If you jump pins 1 & 3, The gauge should read 0.
If you jump pins 2 & 3, The gauge should peg.
DO NOT jump pins 1 & 2, PCM damage can & will result!

If the gauge is still unresponsive.....The stepper motor in the gauge is bad....Very common problem

hgs_notes · 07-20-2012, 07:59 PM

Excellent! Thanks for the help.

hgs_notes · 07-21-2012, 10:15 PM

The gage works, tracks up and down. Sensor is bad. I ordered a new one plus the special socket for it to change it out. The reviews for the part on amazon both described the same problem I have and that the sensor replacement fixed it. Part number is AC Delco D1846A for those that might have a similar problem. Amazon was the cheapest supplier I found. It's surprising how many car parts they carry.

07-20-2012, 04:11 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Oil pressure sending unit I've got a 2003 Yukon XL with the 6.0 and automatic. My gage is pegged high on the oil pressure gage. Can someone direct me where to look for the sending unit for this? A pic would be nice, but a good description would probably work. I'm not sure if it's the gage or the sending unit or something else, but I don't even know where to look right now. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-20-2012, 07:44 PM	#2
clinebarger Senior Member Join Date: May 2009 Location: Fort Worth, TX Posts: 6,370	Re: Oil pressure sending unit The sender is behind the intake...pic. If you jump pins 1 & 3, The gauge should read 0. If you jump pins 2 & 3, The gauge should peg. DO NOT jump pins 1 & 2, PCM damage can & will result! If the gauge is still unresponsive.....The stepper motor in the gauge is bad....Very common problem Attached Images

07-20-2012, 07:59 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Oil pressure sending unit Excellent! Thanks for the help. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-21-2012, 10:15 PM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Oil pressure sending unit The gage works, tracks up and down. Sensor is bad. I ordered a new one plus the special socket for it to change it out. The reviews for the part on amazon both described the same problem I have and that the sensor replacement fixed it. Part number is AC Delco D1846A for those that might have a similar problem. Amazon was the cheapest supplier I found. It's surprising how many car parts they carry. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.