The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-15-2011, 11:22 PM   #26
Redcap
Registered User
 
Join Date: May 2010
Location: Lewis County, WA
Posts: 1,523
Re: NP 205 Rebuild and Info

This was seriously one of the best NP205 write-ups I've ever seen. Excellent job jbclassix!
Redcap is offline   Reply With Quote
Old 06-28-2011, 03:02 PM   #27
SeventyOne
Registered User
 
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,359
Re: NP 205 Rebuild and Info

Next I installed the linkage



1st Off - I wish I had this post to help me when I did my rebuild last month!

2nd - Do you have any other pics of the linkage/shift rail tie bar? I seem to have some extra washers and a curved "wave washer" and I can't recall how it does back on. I am guessing it goes in the the end of that angled twisted piece and connects the the shifter itself...
SeventyOne is offline   Reply With Quote
Old 06-28-2011, 03:13 PM   #28
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

I think the wave washer goes between the shift bar and flat washer... I just looked at mine, and I am missing it. I will see if I can find it, get it installed, and take a picture. Thanks for pointing that out!
__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote
Old 06-29-2011, 05:53 PM   #29
madcow75
Registered User
 
madcow75's Avatar
 
Join Date: Jun 2009
Location: Fort Erie , Ontario
Posts: 525
Re: NP 205 Rebuild and Info

Nice thread. You just made it possible for everyone to tackle a complete rebuild. Information is greatly appreciated. Keep up the good posts.
madcow75 is offline   Reply With Quote
Old 06-30-2011, 06:12 PM   #30
Rdrdave
Broke and still trying
 
Rdrdave's Avatar
 
Join Date: Apr 2003
Location: Alameda, CA
Posts: 562
Re: NP 205 Rebuild and Info

When I tear mine apart again, i'll be sure to scoot over Redwood Rd and drop mine off! Great job!
Rdrdave is offline   Reply With Quote
Old 06-30-2011, 06:17 PM   #31
Rdrdave
Broke and still trying
 
Rdrdave's Avatar
 
Join Date: Apr 2003
Location: Alameda, CA
Posts: 562
Re: NP 205 Rebuild and Info

That previous post was for SeventyOne, JB this is a great post and thanks for all the pics!
Rdrdave is offline   Reply With Quote
Old 06-30-2011, 06:43 PM   #32
SeventyOne
Registered User
 
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,359
Re: NP 205 Rebuild and Info

Quote:
Originally Posted by Rdrdave View Post
When I tear mine apart again, i'll be sure to scoot over Redwood Rd and drop mine off! Great job!
Did you pick Redwood road randomly? I live about 100 feet off of Redwood
I will be dropping my drivetrain into the Blazer Sunday if you wanted to come by.
SeventyOne is offline   Reply With Quote
Old 07-08-2011, 03:32 PM   #33
SeventyOne
Registered User
 
Join Date: Mar 2007
Location: Oakland, Ca
Posts: 1,359
Re: NP 205 Rebuild and Info

Any update on the linkage JBC?
SeventyOne is offline   Reply With Quote
Old 07-08-2011, 08:42 PM   #34
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

Quote:
Originally Posted by SeventyOne View Post
Any update on the linkage JBC?
Unfortunately, no... I have not done any work on it. I have been working on an Eaton HO72, the 4th door project, and work. I think the wave washer goes on the shift lever. I have some time so I will check tonight!
__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote
Old 07-08-2011, 09:00 PM   #35
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

OK, so I looked up where the wave washer goes, and if you have the round-bar linkage, the linkage goes on the shift lever, then the wave washer goes against the lever, then the flat washer, then the cotter key. I will see if I can link the adobe picture.
__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote
Old 08-28-2011, 10:53 AM   #36
Mt Man Chad
Registered User
 
Mt Man Chad's Avatar
 
Join Date: Oct 2006
Location: Oakridge Oregon
Posts: 1,865
Re: NP 205 Rebuild and Info

Great job on the write up, Thanks!
Is that a stock shift bar, looks a little different than my stock one?
Attached Images
 
__________________
68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps.
68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread
Mt Man Chad is offline   Reply With Quote
Old 08-28-2011, 10:56 AM   #37
madcow75
Registered User
 
madcow75's Avatar
 
Join Date: Jun 2009
Location: Fort Erie , Ontario
Posts: 525
Re: NP 205 Rebuild and Info

there are I think 2 different types.
madcow75 is offline   Reply With Quote
Old 08-28-2011, 02:23 PM   #38
jerry moss
Born Psycho
 
jerry moss's Avatar
 
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,713
Thumbs up Re: NP 205 Rebuild and Info

i just added this to my "favorites" list.
great info, thanks a bunch. you are doing some awesome work.
__________________
jerry moss
72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD
69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies.
73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog.
77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW
BRENTWOOD,CALIFORNIA
jerry moss is offline   Reply With Quote
Old 08-29-2011, 06:29 AM   #39
D.PASSMORE
One of the First
 
D.PASSMORE's Avatar
 
Join Date: Jan 2000
Location: St. Augustine,FL.
Posts: 4,043
Re: NP 205 Rebuild and Info

Can you recommend a good (not chinese-) rebuild kit? Where to buy?
Good stuff, I'm just starting on a rebuild.
Thanks DP
__________________
DAVID PASSMORE
ST AUGUSTINE ,FL
ZIP 32084

'71 SWB K/10 CUSTOM DELUXE (Chili)
'72 BLAZER K/5 Muscle Truck (Mule)
'72 LWB K/20 CHEYENNE (Blackie)
D.PASSMORE is offline   Reply With Quote
Old 03-27-2012, 01:59 PM   #40
tdkosta
Registered User
 
tdkosta's Avatar
 
Join Date: Jan 2007
Location: Mesa, AZ
Posts: 781
Re: NP 205 Rebuild and Info

Great thread thanks a ton
tdkosta is offline   Reply With Quote
Old 04-19-2012, 07:50 AM   #41
JPalmer81
Registered User
 
JPalmer81's Avatar
 
Join Date: Mar 2012
Location: Anchorage, AK
Posts: 351
Re: NP 205 Rebuild and Info

Thanks a ton, i will be using this this winter when i do a sm465 and np205 rebuild!! Invaluable!
__________________
1988 Chevy Crew Cab 1ton 4x4 SRW LWB
1977 Dodge 1 ton 4x4

My Build Thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=516872

"The price of Freedom is Eternal Vigilance"
JPalmer81 is offline   Reply With Quote
Old 04-19-2012, 11:54 PM   #42
swclassics
Registered User
 
swclassics's Avatar
 
Join Date: Aug 2011
Location: Queen Creek, AZ
Posts: 39
Re: NP 205 Rebuild and Info

Awesome thread, thank you!
swclassics is offline   Reply With Quote
Old 04-20-2012, 02:55 PM   #43
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

I'm glad that everyone appreciates this thread! I guess I should let everyone know why I haven't installed the yokes and adapter yet. Some of you may know that in September I was in an accident during my move from Colorado to California. Unfortunately I was unable to tow the trailer with all my stuff in it the rest of the way, so the trailer, and everything in it, are in storage in Colorado. The t-case, the suburban it goes in, all my shop tools, everything.

Hopefully I will get out to CO this year and finish this up for all you!
__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote
Old 10-27-2012, 07:07 PM   #44
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: NP 205 Rebuild and Info

since the 205 is super common and this is a good resource ill add what i know to be true. please feel free to add your input.
keeping this to 69-72, 73-87/91 big body pickups


ALL crew cabs were fixed yoke.
regular cabs with carrier bearing were fixed yoke.
post 1985 np205 regular cabs are slip yoke.
all 1980 tcases were 205s. most slip yokes.
all rear output shafts are 32 spline. fixed and slip.
both slip and fixed yoke can be swapped with just removing the 8 bolt housing and removing as an assembly. also between chevy ford dodge and international. speedo and breathers just change.
vss introduced in 1990.
all 205s were figure 8 front pattern until 1985.
1985 introduced the round pattern 205.
i think 73 the speedo cable moved to passenger side.
several assortments of shifter styles.
1985 also introduced the W and S crossmembers to be used with short adapters and one piece rubber mounts.
pre 1985 one ton 205s had a flatter crossmember than 1/2 and 3/4 tons.
pre 1985 1 ton crossmembers went INSIDE the rails.
pre 1985 1/2 and 3/4 tons went below the rails.



the common/early sm465 version of the 205:
figure 8 pattern face
ten spline input male
small input bearing
ten spline front output if it has the spicer CV.
30 spline front output for the later flanged cv front driveshaft.
uses the taller two footed adapter

the other/later sm465 version of the 205
found post 1985
round pattern face
32 spline female input gear. with the BIG bearing case.
LONG input gear, around 4". not short th400 style.
30 spline front output flanged
uses the short foot adapter with one piece rubber mount


th350 version
27 spline male input gear.
small input bearing
figure 8 pattern only offered.
tall adapter.
can be used to put behind a 700r4.


early th400 version
figure 8 pattern face
32 spline short input gear, 2" ish.
large input bearing
strongest for offroad applications especially doublers


later th400 version
found 1985 and newer
round pattern face
long input gear same as later 465 version.
same large input bearing
30 spline flanged front output.
this is what you want for putting it behind an nv4500.
use a pre 1985 short th400 input gear if you dont want to use the advance adapter spacer. but thats a whole nother can of monkeys.

4l80 version
1991 only
round pattern face
large input bearing
does not share same adapter as th400.
has its very own adapter
same long input gear
VSS


ford international and dodge np205
they have a 32 spline front output shaft
these all swap over to GM cases to enable larger/better yokes to be installed.

Last edited by obijuan; 10-27-2012 at 07:13 PM.
obijuan is offline   Reply With Quote
Old 06-07-2013, 06:08 AM   #45
jjzepplin
Registered User
 
jjzepplin's Avatar
 
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,538
Re: NP 205 Rebuild and Info

The holy grail of NP205 information!
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller
72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build
Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350
jjzepplin is offline   Reply With Quote
Old 06-07-2013, 11:00 AM   #46
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,203
Re: NP 205 Rebuild and Info

Thank you, and thank you obijuan for your contributions.

I will be adding more info as time goes on. Please do the same!
__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote
Old 06-11-2013, 09:44 AM   #47
jaros44sr
Registered User
 
jaros44sr's Avatar
 
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,408
Re: NP 205 Rebuild and Info

Is there any info. on the seals and how they are installed for the adapter that bolts to the trans? Seems this is where mine is leaking

Help?

Thanks for taking the time jbclassix
__________________
Semper Fi...Uncle Sam, you da man

All parts offered to help are free, unless otherwise noted

Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST

AS usual, off topic

They say your mind goes second, can't remember the first


Jim
jaros44sr is offline   Reply With Quote
Old 06-11-2013, 01:42 PM   #48
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: NP 205 Rebuild and Info

On the transmission side of the adapter there is a groove for a rubber o ring.
Posted via Mobile Device
obijuan is offline   Reply With Quote
Old 06-11-2013, 04:47 PM   #49
jjzepplin
Registered User
 
jjzepplin's Avatar
 
Join Date: Feb 2012
Location: Ruskin Florida
Posts: 4,538
Re: NP 205 Rebuild and Info

There are also two regular type seals that are in the adapter for the coupler outer seals. The inner is the o ring. This keeps fluid from your trans from going into your t-case.
__________________
70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller
72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build
Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350
jjzepplin is offline   Reply With Quote
Old 06-11-2013, 06:38 PM   #50
silvertip67
Registered User
 
silvertip67's Avatar
 
Join Date: May 2010
Location: pine colorado
Posts: 89
Re: NP 205 Rebuild and Info

its been a while...but this is a super quality thread...lots of work went into it!

I am not exctly up to par on the level required to do this...but I just got a rebuild kit for my local shop that is familiar with such.

it was very informative to actually see whats going on...

I can do most on my 67 CST...but we all have our limitations...
__________________
ted cruisin in my '67
K-20 '67 Custom Sport Truck

'55 Chevrolet 3100 w/ 235 il6(Powermaster)
'63 Chevrolet 1/2 ton 250 il6
'65 Chevrolet 1/2 ton 283 V8
silvertip67 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com