Granny smith, 71 2wd build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Justin@EntropyRad · 08-20-2015, 11:07 AM

killer build so far!

lyrikz · 08-20-2015, 11:58 AM

Quote:

Originally Posted by bk04z66

No recent progress, just been cruising it and ordering parts. Even at the much lower ride height the bags ride better than the old springs. There is a sweet spot though. If I ride around with it too low, it develops a vibration. I'm guessing shaft angle.

Do guys that lay frame have to raise the gas tank up??

Splash4195 · 08-23-2015, 10:50 PM

Very cool!

Justin@EntropyRad · 08-24-2015, 11:25 AM

Quote:

Originally Posted by lyrikz

Do guys that lay frame have to raise the gas tank up??

Often, then they are usually raising the bed floor at that point. Some of the aftermarket tanks(boyds welding,vaporworx, etc) have a chamfer to allow extra clearance, but they can be raised to the top of the frame rail if going silly low

bk04z66 · 08-30-2015, 07:24 PM

Drove by a junkyard yesterday and they had just brought in a 68 camper special. Pulled the grill out of it and had it in my blaze within a hour. I have been taking it to shows when I can. The response it gets is great. This winter I'm going to patch the drivers quarter, and try to color match the rest of the patina. If I have money/time I'll get a air system for it.

rawdog · 08-31-2015, 07:25 PM

keep up the good work looking great

bk04z66 · 09-01-2015, 05:58 PM

Quote:

Originally Posted by Justin@EntropyRad

killer build so far!

Thanks!

bk04z66 · 09-01-2015, 05:59 PM

Quote:

Originally Posted by rawdog

keep up the good work looking great

Thank you. If your in gboro you should try to make it to the show at northern tool in Burlington every month.

bk04z66 · 09-01-2015, 08:00 PM

I'll post some aired out pics. The front would go lower if I'd get rid of the 75 series front tires. They are hitting the wheel wells.

bk04z66 · 09-01-2015, 08:02 PM

#2 rear is sitting on the bump stops and still has cl.

Chulisohombre · 09-02-2015, 08:02 AM

Front grill looks like in good shape. I got mine from 10 bucks at a yard right before they crushed the c10 it was sitting in. Was sad to see it die. But I saved a couple parts off it before it did.

rawdog · 09-06-2015, 03:31 PM

i went to the last one bunch of imports

**invicta455** · 02-25-2016, 06:29 PM

How's the build going

bk04z66 · 03-03-2016, 02:33 PM

Been working on the interior a little here and there. Got the back seat fixed up like the front prp's will post pics when I get the inside lined.

08-20-2015, 11:07 AM	#76
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: Granny smith, 71 2wd build killer build so far! __________________ * Call me NOT the website number* Justin Novick (773) 303-8251 Sales/Support Entropy Radiator / Engineered Cooling Products "The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com

08-23-2015, 10:50 PM	#78
Splash4195 Registered User Join Date: Jan 2010 Location: Minnesota Posts: 341	Re: Granny smith, 71 2wd build Very cool!

08-30-2015, 07:24 PM	#80
bk04z66 Registered User Join Date: Jun 2012 Location: mebane,nc Posts: 120	Re: Granny smith, 71 2wd build Drove by a junkyard yesterday and they had just brought in a 68 camper special. Pulled the grill out of it and had it in my blaze within a hour. I have been taking it to shows when I can. The response it gets is great. This winter I'm going to patch the drivers quarter, and try to color match the rest of the patina. If I have money/time I'll get a air system for it. Attached Images

08-31-2015, 07:25 PM	#81
rawdog Registered User Join Date: Jul 2015 Location: greensboro nc Posts: 20	Re: Granny smith, 71 2wd build keep up the good work looking great

09-01-2015, 08:00 PM	#84
bk04z66 Registered User Join Date: Jun 2012 Location: mebane,nc Posts: 120	Re: Granny smith, 71 2wd build I'll post some aired out pics. The front would go lower if I'd get rid of the 75 series front tires. They are hitting the wheel wells. Attached Images

09-01-2015, 08:02 PM	#85
bk04z66 Registered User Join Date: Jun 2012 Location: mebane,nc Posts: 120	Re: Granny smith, 71 2wd build #2 rear is sitting on the bump stops and still has cl. Attached Images

09-02-2015, 08:02 AM	#86
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: Granny smith, 71 2wd build Front grill looks like in good shape. I got mine from 10 bucks at a yard right before they crushed the c10 it was sitting in. Was sad to see it die. But I saved a couple parts off it before it did. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

09-06-2015, 03:31 PM	#87
rawdog Registered User Join Date: Jul 2015 Location: greensboro nc Posts: 20	Re: Granny smith, 71 2wd build i went to the last one bunch of imports

02-25-2016, 06:29 PM	#88
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 531	Re: Granny smith, 71 2wd build How's the build going

03-03-2016, 02:33 PM	#89
bk04z66 Registered User Join Date: Jun 2012 Location: mebane,nc Posts: 120	Re: Granny smith, 71 2wd build Been working on the interior a little here and there. Got the back seat fixed up like the front prp's will post pics when I get the inside lined.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.