|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-03-2015, 11:41 PM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: Alberta
Posts: 20
|
'71 c30 hanger/shackle
Could I have you guys take a look at my poor quality pictures and see if you think the standard drop hanger/shackle kits for 67-87 leaf sprung trucks would fit? I recently removed the deck and am not sure what I will be doing for a box but would like to tackle the suspension. I intend on removing the overload leafs and the truck also had lift blocks in.
 
|
|
|
|
10-04-2015, 09:31 AM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,714
|
Re: '71 c30 hanger/shackle
The 2x4 67-72 trucks had 2 1/4" wide leaf springs at least on the 1/2 and 3/4 ton models. What is the width of your spring? If it's 2 1/4" then the ECE shackles will work. If it is 2 1/2" most likely the '73-'87 would work just fine.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
10-04-2015, 10:12 AM
|
#3 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,257
|
Re: '71 c30 hanger/shackle
When the 88 body style came out the local muffler shop would take those shackles out and cut them in half and weld plates to each side making a drop shackle. Just a thought. Jim
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
