The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 99-06 Chevy and GMC Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-19-2015, 11:04 PM   #1
Twin Turbo Skylark
Registered User
 
Join Date: Nov 2015
Location: fort saskatchewan
Posts: 73
Project light duty work truck

Here is my project truck and daily driver:

I bought it stock a few years ago and slowly transformed it into this beast. 5.3, 4L60E, 3.42 gears. I need to swap 3.73 gears under it, I have a parts truck that I can steel them from.

I use this truck as my work truck in the oil and gas industry, it needs to be capable both on and off road, and comfortable inside as well.. It is fully loaded, leather, sun roof, pretty darn nice truck compared to my early GM trucks.

Before:



With 6.5" BDS lift and 35" tall 12" wide BFG AT:







After towing some trailers and hauling heavy loads I found the rear lift springs were sagging a bit so I added some lift blocks to get it back up sitting right.

See the sag:



Sitting right now with the rear lifted back up:








[/QUOTE]
Twin Turbo Skylark is offline   Reply With Quote
Old 02-16-2017, 03:43 PM   #2
Twin Turbo Skylark
Registered User
 
Join Date: Nov 2015
Location: fort saskatchewan
Posts: 73
Re: Project light duty work truck

new pics:





Twin Turbo Skylark is offline   Reply With Quote
Old 02-17-2017, 12:45 AM   #3
izzy_Britton
Senior Member
 
izzy_Britton's Avatar
 
Join Date: Apr 2013
Location: Nor-Cal
Posts: 543
Re: Project light duty work truck

no interior pics?

I am looking to build something very similar, but 2wd. I just found a free CC cab with sunroof that i might swap out with mine. my cab has some damage but i would really like a sun roof i think.

-Izzy
izzy_Britton is offline   Reply With Quote
Old 03-05-2017, 09:08 PM   #4
Hoods69BadBowTie
Chevys Kick A$$
 
Hoods69BadBowTie's Avatar
 
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,698
Re: Project light duty work truck

Nice looking truck looks perfect with the lift and tire stance. I like how it was all done it is setup to be used as a work truck but not so crazy that it can't be a dd or driven on the road. Keep on enjoying cruising it and getting a little dirt on it
__________________
*HOODS is what I answer too*
-'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold
-'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit
-'86 K5 Blazer Silverado 6.2 4" lift 35"s
-'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's
-'83 Monte Carlo T-Tops. 126,500 Original Miles
-LATER
I would rather push a Chevy then drive a ford!!
Hoods69BadBowTie is offline   Reply With Quote
Old 03-07-2017, 12:18 AM   #5
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 6,643
Re: Project light duty work truck

Looks good dude! I think you could spice the grill up a bit with a new center-section. I have the same one on my Yukon, and I feel like removing those horizontal bars and replacing it with something (maybe something cool off the waterjet?) changes is huuugely.

Gotta love a lifted Chev, with a musclecar on the trailer.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 04-24-2017, 08:15 PM   #6
Smallz72project
Registered User
 
Smallz72project's Avatar
 
Join Date: May 2005
Location: Missoula, MT
Posts: 272
Re: Project light duty work truck

Your lift kit came with a lift block for the rear. Rear you add a second one on top of that, or did you replace it with a taller single block?
__________________
- 1967 Chevy C10 shortbox
- 1984 Chevy K10 "Mater"- SWB 305 manual, retired sheriffs truck, Current Frame Off Project
- 1986 Chevy K10 LWB 350/350 Daily Driver/project
Smallz72project is offline   Reply With Quote
Old 04-25-2017, 01:43 PM   #7
special-K
Special Order
 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt.Airy,MD
Posts: 61,252
Re: Project light duty work truck

I like it. Great job. I may be stepping into a K1500 GMC long bed for my next work truck. Always been an 8-lug guy but when a deal comes along, and you need a good deal, you have to take the opportunity. The GVWs are plenty high on these 1/2t pickups anyway. This is a friend's dad's truck he is selling...red reg. cab 5.3 89k no rust for $3k. He added a Lind visor (oh well, maybe tend to that later), tube bed rails (they'll go), and dual baloney slices under the bumper. It has all new fuel and brake lines by GM dealer.

I want to lift it, wheels, tires, and probably a work topper/cap/canopy/shell type thingy with ladder rack. I'm lifting less with maybe 285/75s. Your truck inspires me, though. I'm staying minimum because I want to focus on my 67 and 72, just need a dependable get down the road right now
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

'67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi...project 'Driver Quality'
'72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok...'The 72'
Tim

"Don't call me a redneck. I'm just a rough cut country gentleman"

R.I.P. East Side Low Life __________ R.I.P. El Jay_____________ R.I.P. 72BLUZ _____________
special-K is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com