|
10-16-2013, 08:05 PM
|
#1 |
|
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
02 sensor help
I have a harness that came with the flat 4 pin 02 sensor connector. The problem is that its a male connector, also all the 02 sensors I have seen have male connectors too. What am I missing here? The harness came off a 01 chevy truck with a 4l80e trans if that helps. Can I get an coupling or just buy the female connecter? Thanks
|
|
|
|
10-16-2013, 08:56 PM
|
#2 |
|
Registered User
Join Date: Sep 2012
Location: Milwaukie OR
Posts: 135
|
Re: 02 sensor help
That's just how they are, mines the same and its a 99. O2 sensors do come with female plugs.
|
|
|
|
|
10-16-2013, 09:28 PM
|
#3 |
|
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
Re: 02 sensor help
Thanks I didn't realize that, yea I found the sensor I think will work bosch 13027 it has the female end.
|
|
|
|
|
10-17-2013, 02:44 AM
|
#4 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: 02 sensor help
I had mine setup for the "all purpose" upstream 02 sensor with heater circuit. The Bosch 13444 runs the square 4 pin connector instead of the model specific style. They are fairly cheap as well, just something to keep in mind if your making your own harness.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
11-05-2014, 04:12 PM
|
#5 |
|
Registered User
Join Date: Feb 2009
Location: Santa Rosa, CA
Posts: 267
|
Re: 02 sensor help
I'm going to resurrect this thread to ask a follow up question. My harness guy put the flat four connectors on my harness instead of the stock 4 square ones. (REFERENCE) I don't mind getting new sensors, in fact, its probably a good idea anyway.
So, True or False: The sensors in question,  Bosch 13026 (matches my harness) instead of the OE styled Bosch 13474 will provide the same info to the PCM but are terminated with different connectors.
|
|
|
|
 |
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
