Finally got my burb side panel vinyl! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

vectorit · 08-03-2009, 06:44 PM

My vinyl came in today, and it looks great.

Now my side panels will look good again, and look like they came from the factory in 1968!

**N2TRUX** · 08-03-2009, 06:51 PM

Where did ya get it?

vectorit · 08-03-2009, 07:13 PM

Quote:

Originally Posted by N2TRUX

Where did ya get it?

www.smsautofabrics.com

(503)263-3535

SMS Auto Fabrics
350 South Redwood St.
Canby, OR 97013

Spoke with Doug, and he was pretty knowledgeable of the old stuff. So my needs were easy to explain.

info@smsautofabrics.com

Longhorn Man · 08-03-2009, 07:15 PM

what did it set you back... if you don't mind.
I wouldn't mind redoing mine... but it isn't all that bad.

vectorit · 08-03-2009, 07:21 PM

It was pretty spendy, but it's cheaper than the 70 up rear cargo area repro's in catalogs. Plus I am able to do all of the panels from the same roll, so there isn't any chance of colors and grain being off from panel to panel.

$49.00 a yard. That included the faux stitching being imprinted.

**N2TRUX** · 08-03-2009, 07:26 PM

I think those are the guys that are buying up all the NOS trim supplies around the country.

Longhorn Man · 08-03-2009, 07:53 PM

considering how obscure this print/color is... that's not bad at all

70rs/ss · 08-04-2009, 11:34 AM

I need/want the panels, mine is a stripper burb can I get them as a set from one of the vendors?

BTW that place has everything, they are sending me samples of utility bucket material as well!!

vectorit · 08-04-2009, 12:46 PM

You can now get the cargo area panels for the burbs from places like LMC, but they only carry 69 to 72 versions for around 700.00! Pretty pricey for me for just the cargo area...

My issue was that I have a not so common color, and that it's a 68 which most if not all vendors do not carry yet for the 67/68.

Yea, I was impressed with their selection of materials. They sent me samples of all vinyl and cloth options for the 67/68, and what they sent was spot on to what I was looking for.

Not only do they carry the material, they can do the embossing just like the factory did. I took detailed pictures with measurements to him, and he just responded "not a problem". (Refreshing to hear for me these days).

He said they have the documentation for most embossing, but said that detailed pictures are appreciated so that there are no misunderstandings.

70rs/ss · 08-04-2009, 02:28 PM

OH for $700 bones I can make the panels and buy the right color material from SMS, I too have an oddish color, TOOTHPASTE GREEN! I may go to a different color and or material, but knowing SMS has my back I may stockish appearing inside, heck I may have my late model seats covered with factory appearing materials, that would be cool late model integrated seat belt buckets in toothpaste green!! Yeah baby!

08-03-2009, 06:44 PM	#1
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Finally got my burb side panel vinyl! My vinyl came in today, and it looks great. Now my side panels will look good again, and look like they came from the factory in 1968! Attached Images __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

08-03-2009, 06:51 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Finally got my burb side panel vinyl! Where did ya get it? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-03-2009, 07:15 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Finally got my burb side panel vinyl! what did it set you back... if you don't mind. I wouldn't mind redoing mine... but it isn't all that bad.

08-03-2009, 07:21 PM	#5
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Finally got my burb side panel vinyl! It was pretty spendy, but it's cheaper than the 70 up rear cargo area repro's in catalogs. Plus I am able to do all of the panels from the same roll, so there isn't any chance of colors and grain being off from panel to panel. $49.00 a yard. That included the faux stitching being imprinted. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

08-03-2009, 07:26 PM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Finally got my burb side panel vinyl! I think those are the guys that are buying up all the NOS trim supplies around the country. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-03-2009, 07:53 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Finally got my burb side panel vinyl! considering how obscure this print/color is... that's not bad at all

08-04-2009, 11:34 AM	#8
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Finally got my burb side panel vinyl! I need/want the panels, mine is a stripper burb can I get them as a set from one of the vendors? BTW that place has everything, they are sending me samples of utility bucket material as well!!

08-04-2009, 12:46 PM	#9
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: Finally got my burb side panel vinyl! You can now get the cargo area panels for the burbs from places like LMC, but they only carry 69 to 72 versions for around 700.00! Pretty pricey for me for just the cargo area... My issue was that I have a not so common color, and that it's a 68 which most if not all vendors do not carry yet for the 67/68. Yea, I was impressed with their selection of materials. They sent me samples of all vinyl and cloth options for the 67/68, and what they sent was spot on to what I was looking for. Not only do they carry the material, they can do the embossing just like the factory did. I took detailed pictures with measurements to him, and he just responded "not a problem". (Refreshing to hear for me these days). He said they have the documentation for most embossing, but said that detailed pictures are appreciated so that there are no misunderstandings. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

08-04-2009, 02:28 PM	#10
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Finally got my burb side panel vinyl! OH for $700 bones I can make the panels and buy the right color material from SMS, I too have an oddish color, TOOTHPASTE GREEN! I may go to a different color and or material, but knowing SMS has my back I may stockish appearing inside, heck I may have my late model seats covered with factory appearing materials, that would be cool late model integrated seat belt buckets in toothpaste green!! Yeah baby!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.