|
05-30-2002, 03:43 PM
|
#1 |
|
Southern but in Ohio!!!!
Join Date: Jan 2002
Location: Eaton,Oh. 45320
Posts: 467
|
Conversion
I was wnderin what all needs to be replaced " or changed" in order to go to a wood bed floor. I know the front panel has to be changed or a L bracket to go under the wood & the tail piece of the bed but do any of the support that go under the bed floor are they any differ????? I'm thinking of doing this to my truck if I know what all needs to be changed or what I can get be with ...with a little twikin!
Rob. Diggin 69 
__________________
1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com |
|
|
|
05-30-2002, 04:30 PM
|
#2 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
the very tailend of the flor wil ave to be modified so that you have a a channel for the ends of the boards to rest in, the only thing that doest not really differ are the sides and tubs, everything else differs from wood to steel, there are kits to do this out there if you hunt around
good luck |
|
|
|
|
05-30-2002, 05:08 PM
|
#3 |
|
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
These folks have everything you need for the conversion from steel floor to wood floor.
http://www.mar-k.com/ Hope this helps..... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
