OR 100's of misc parts from the last 6 trucks parted out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**landarts** · 07-30-2011, 03:26 PM

is the 1970 power brake booster still available?

reecetas7196 · 07-31-2011, 12:14 AM

I'd like dome light lens with wiring and white housing unit if possible and still available, also a windshield wiper hose set. if you could pm total price with shipping to 91950 that would be great. Thanks.

**tll74** · 07-31-2011, 01:34 AM

Quote:

Originally Posted by 67gmcstepside

Is the distrbutor still available?
Thanks, Don
Posted via Mobile Device

Yes, It is!

**tll74** · 07-31-2011, 01:45 AM

Quote:

Originally Posted by landarts

is the 1970 power brake booster still available?

Yes it is, Thanks Tom

**tll74** · 07-31-2011, 01:53 AM

Quote:

Originally Posted by reecetas7196

I'd like dome light lens with wiring and white housing unit if possible and still available, also a windshield wiper hose set. if you could pm total price with shipping to 91950 that would be great. Thanks.

PM sent

**tll74** · 07-31-2011, 01:54 AM

Quote:

Originally Posted by Gmichael

Will you pm me your paypal info and a price shipped to 98686 for the pulley, fan, backup lenses and shift linkage?

Garrett

PM sent

roadking-111 · 08-01-2011, 12:33 AM

I'll take the 70 brake booster if landarts passes.

**tll74** · 08-01-2011, 01:21 AM

Quote:

Originally Posted by roadking-111

I'll take the 70 brake booster if landarts passes.

Well...lets give him till tomorrow evening to respond. After that it's yours.
Thanks, Tom

reecetas7196 · 08-01-2011, 11:05 AM

Paypal for dome light, housing(white), and wiring sent.

Thanks,

Joe
Posted via Mobile Device

stealthy '69 · 08-02-2011, 01:26 AM

If cstm68 passes on the belts I'll take them.

**tll74** · 08-02-2011, 02:01 AM

Quote:

Originally Posted by stealthy '69

If cstm68 passes on the belts I'll take them.

Belts sold to cstm68 pending payment. If they become available your next in line. Thanks

roadking-111 · 08-03-2011, 06:22 PM

I'll take the 70 booster. Paypal sent.

**tll74** · 08-04-2011, 08:26 PM

Quote:

Originally Posted by roadking-111

I'll take the 70 booster. Paypal sent.

Thanks, it will ship tomorrow, Tom

reecetas7196 · 08-05-2011, 11:49 AM

Dome lamp received. Not exactly what I was expecting but I'm happy with it. Thank you much!
Posted via Mobile Device

rstrick · 08-09-2011, 01:12 AM

Paypal for Blazer fuel filler cover some dings 22.00

Please send me your Paypal info.

Thanks.

Roy

turner16 · 08-09-2011, 05:39 AM

Would you have the little mount on the carb that holds the throttle cable? For a 350, 1971.

CEE1NG_RED · 08-09-2011, 09:43 AM

...on your 4th picture from the 1st page post, are those 2 sets of complete wiring harnesses?? If so, is it complete and functional? I need a good set for my 67 sb truck. How much shipped to 90807 Long Beach, CA.? Also, can you post pics of the dash knobs and do you have a good set of radio knobs? Pics please. Thanks.

69Mule · 08-09-2011, 07:48 PM

Do you still have the front upper and lower control arms available? What would you charge with shipping to 91354?

mrjake7 · 08-09-2011, 11:40 PM

Hi,

Do you happen to have a passenger side inner front fender in decent shape? Thanks!

**tll74** · 08-10-2011, 01:22 AM

rstrick, Message sent to your profile page.

turner16, 7.00 for the bracket and 5.95 for a small flat rate usps box.
I'm guessing it is for the Qjet carb. LMK Thanks

CEE1NG RED, the pictured harnesses are not for a 67 truck. I do have all the wiring still in a 67 C20 327 AT and gauges. I need more specific info as to which harnesses you need. Yes on the radio knobs and yes on the pics. I'll try to get them posted Wendsday. Thanks

69Mule, yes I do have the control arms. Shipping cost will come tomorrow morning. Thanks

mrjake7, Sorry no extra inner RH fenders at this time.

rstrick · 08-10-2011, 07:58 AM

Tom,

Thanks. I sent the money thru PayPal.

Roy

CEE1NG_RED · 08-10-2011, 09:35 AM

Quote:

Originally Posted by tll74

CEE1NG RED, the pictured harnesses are not for a 67 truck. I do have all the wiring still in a 67 C20 327 AT and gauges. I need more specific info as to which harnesses you need. Yes on the radio knobs and yes on the pics. I'll try to get them posted Wendsday. Thanks

...I'll need a complete wiring harness for a '67 c10 (despite the motor being from a '78 350). If not, my resort will prolly be an EZ wiring kit. As for the knobs, I'll need a set of radio knobs, headlight, wipers, and whatever knobs that goes in the dash, but in great/good condition. LMK about the pics and the shipping cost to 90807 CA. Thanks.

**tll74** · 08-10-2011, 05:15 PM

Quote:

Originally Posted by 69Mule

Do you still have the front upper and lower control arms available? What would you charge with shipping to 91354?

The four arms and packaging weighs 75 lbs. Shipping via UPS is 49.00
Thanks

69Mule · 08-10-2011, 05:31 PM

Quote:

Originally Posted by tll74

The four arms and packaging weighs 75 lbs. Shipping via UPS is 49.00
Thanks

$159 total for all four a-arms and the shafts.. Sounds good, please PM me with payment details..

**tll74** · 08-10-2011, 06:45 PM

Quote:

Originally Posted by CEE1NG_RED

...I'll need a complete wiring harness for a '67 c10 (despite the motor being from a '78 350). If not, my resort will prolly be an EZ wiring kit. As for the knobs, I'll need a set of radio knobs, headlight, wipers, and whatever knobs that goes in the dash, but in great/good condition. LMK about the pics and the shipping cost to 90807 CA. Thanks.

OK...under dash harness is 75.00 in nice condition, Engine harness 45.00 looks fine but still to pull to verify, Head lamp harness 45.00 looks fine but again it needs pulled as well. Tail lamp wiring 15.00 from firewall to bumper nice condition. Dome lamp wiring 15.00 nice cond. All knobs including radio knobs 20.00 nice condition. They are dirty and will clean up nice. Shipping via UPS is 16.50. No problem coming up with nice knobs. I have these in the picture and 15 trucks yet to get parted out.
Thanks

07-30-2011, 03:26 PM	#76
landarts landarts Join Date: May 2005 Location: Star, Idaho Posts: 1,323	Re: 100's of misc parts from the last 6 trucks parted out is the 1970 power brake booster still available?

07-31-2011, 12:14 AM	#77
reecetas7196 Registered User Join Date: Jul 2011 Location: Orange, CA Posts: 64	Re: 100's of misc parts from the last 6 trucks parted out I'd like dome light lens with wiring and white housing unit if possible and still available, also a windshield wiper hose set. if you could pm total price with shipping to 91950 that would be great. Thanks.

08-01-2011, 12:33 AM	#82
roadking-111 Registered User Join Date: Feb 2006 Location: Windsor, CO Posts: 67	Re: 100's of misc parts from the last 6 trucks parted out I'll take the 70 brake booster if landarts passes.

08-01-2011, 11:05 AM	#84
reecetas7196 Registered User Join Date: Jul 2011 Location: Orange, CA Posts: 64	Re: 100's of misc parts from the last 6 trucks parted out Paypal for dome light, housing(white), and wiring sent. Thanks, Joe Posted via Mobile Device

08-03-2011, 06:22 PM	#87
roadking-111 Registered User Join Date: Feb 2006 Location: Windsor, CO Posts: 67	Re: 100's of misc parts from the last 6 trucks parted out I'll take the 70 booster. Paypal sent.

08-05-2011, 11:49 AM	#89
reecetas7196 Registered User Join Date: Jul 2011 Location: Orange, CA Posts: 64	Re: 100's of misc parts from the last 6 trucks parted out Dome lamp received. Not exactly what I was expecting but I'm happy with it. Thank you much! Posted via Mobile Device

08-09-2011, 01:12 AM	#90
rstrick Registered User Join Date: Feb 2008 Location: Springfield, MO Posts: 26	Re: 100's of misc parts from the last 6 trucks parted out Paypal for Blazer fuel filler cover some dings 22.00 Please send me your Paypal info. Thanks. Roy

08-09-2011, 05:39 AM	#91
turner16 Registered User Join Date: Sep 2010 Location: Ajax, Ontario Posts: 214	Re: 100's of misc parts from the last 6 trucks parted out Would you have the little mount on the carb that holds the throttle cable? For a 350, 1971.

08-09-2011, 09:43 AM	#92
CEE1NG_RED Registered User Join Date: Oct 2009 Location: LBC California Posts: 497	Re: 100's of misc parts from the last 6 trucks parted out ...on your 4th picture from the 1st page post, are those 2 sets of complete wiring harnesses?? If so, is it complete and functional? I need a good set for my 67 sb truck. How much shipped to 90807 Long Beach, CA.? Also, can you post pics of the dash knobs and do you have a good set of radio knobs? Pics please. Thanks. __________________ - 1967 Chevrolet C/10 SWB fleetside (New Project). - 1969 Chevrolet C/10 SWB fleetside (SOLD) - 2000 Ford Mustang 232 (DD) - 2003 Ford SVT Cobra "Terminator" 281 (Once in a blue moon driver/weekend driver)

08-09-2011, 07:48 PM	#93
69Mule Registered User Join Date: Jul 2011 Location: Valencia, CA Posts: 8	Re: 100's of misc parts from the last 6 trucks parted out Do you still have the front upper and lower control arms available? What would you charge with shipping to 91354?

08-09-2011, 11:40 PM	#94
mrjake7 Registered User Join Date: Jul 2010 Location: Roseburg, Or Posts: 10	Re: 100's of misc parts from the last 6 trucks parted out Hi, Do you happen to have a passenger side inner front fender in decent shape? Thanks!

08-10-2011, 01:22 AM	#95
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out rstrick, Message sent to your profile page. turner16, 7.00 for the bracket and 5.95 for a small flat rate usps box. I'm guessing it is for the Qjet carb. LMK Thanks CEE1NG RED, the pictured harnesses are not for a 67 truck. I do have all the wiring still in a 67 C20 327 AT and gauges. I need more specific info as to which harnesses you need. Yes on the radio knobs and yes on the pics. I'll try to get them posted Wendsday. Thanks 69Mule, yes I do have the control arms. Shipping cost will come tomorrow morning. Thanks mrjake7, Sorry no extra inner RH fenders at this time. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

08-10-2011, 07:58 AM	#96
rstrick Registered User Join Date: Feb 2008 Location: Springfield, MO Posts: 26	Re: 100's of misc parts from the last 6 trucks parted out Tom, Thanks. I sent the money thru PayPal. Roy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.