OR Serpentine belt conversions - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tll74** · 01-08-2013, 07:44 PM

Quote:

Originally Posted by 425HP409

Tom, have you been able to get the measurement for me?
Charles
Posted via Mobile Device

Charles, 11 inches from the water pump gasket surface on the block to the face of the fan clutch. Thanks, Tom

**tll74** · 01-08-2013, 07:50 PM

Quote:

Originally Posted by First c10

How do you connect the radiel compressor to the current A6 style compressor? or what referegerant lines do you need? ok try this again? Can you provide me with part numbers of the A/C lines that would fit the old A/C system to a newer compressor??? hope this makes sense...
Thanks

There are no direct fit hoses for this conversion. You will have to custom make them. I can provide the hoses that match the pump to build off of. Thanks, Tom

**425HP409** · 01-09-2013, 07:18 PM

Quote:

Originally Posted by tll74

Charles, 11 inches from the water pump gasket surface on the block to the face of the fan clutch. Thanks, Tom

I will take the Big Block one. pm me payment info, thanks Charles
ps, zip is 75034

TobyArnot · 01-09-2013, 08:21 PM

Quote:

Originally Posted by tll74

Hi Robbie, You should have it Wednesday. Here is a pic of it just before packaging. The fan is not in the pic. It turned out very nice. Sorry for the delay to many speed bumps during the hoildays among other things. You should like it. Thanks, Tom

.
Wife called and says big heavy box came UPS. Haven't gotten away from work, I'll get it later.
.
And thanks again, Tom

**tll74** · 01-11-2013, 05:45 PM

Quote:

Originally Posted by 425HP409

I will take the Big Block one. pm me payment info, thanks Charles
ps, zip is 75034

Charles, It weights 96 lbs and shipping via UPS is 75.03 thanks, Tom

**425HP409** · 01-12-2013, 10:25 AM

Quote:

Originally Posted by tll74

Charles, It weights 96 lbs and shipping via UPS is 75.03 thanks, Tom

Payment sent, thanks
Posted via Mobile Device

**tll74** · 01-13-2013, 01:11 PM

Thanks Charles, it will ship tomorrow.

68basket · 01-23-2013, 10:20 PM

Do you have any more setups for sbc? I would need the angled thermostat housing if you have that also. zip is 40299 business address.

67ctener · 01-23-2013, 10:24 PM

What does a bb set up cost?
Posted via Mobile Device

**tll74** · 01-24-2013, 05:10 PM

Quote:

Originally Posted by 68basket

Do you have any more setups for sbc? I would need the angled thermostat housing if you have that also. zip is 40299 business address.

Yes, I do. Shipping is 66.00

Quote:

Originally Posted by 67ctener

What does a bb set up cost?
Posted via Mobile Device

325.00 plus shipping. The last one shipped to the east coast for 75.00. Your a lot closer so it would less.

Thanks, Tom

68basket · 01-24-2013, 10:19 PM

ill take one for sbc. Let me know how to pay and a time frame.

Thanks, taylor

**tll74** · 01-26-2013, 03:42 PM

Quote:

Originally Posted by 68basket

ill take one for sbc. Let me know how to pay and a time frame.

Thanks, taylor

Taylor, I can ship one out Monday. I'll send a PM next. Thanks Tom
Posted via Mobile Device

Gryndar · 01-30-2013, 12:17 AM

Do you have any of the 5.7l, 4.3l vortec setups? That have the a/c comp on driver side and alt on passenger. If so how much shipped to 94590
Thanks

67ctener · 01-30-2013, 03:21 PM

Sent you pm for big block set up
Posted via Mobile Device

**tll74** · 01-31-2013, 01:56 AM

Quote:

Originally Posted by Gryndar

Do you have any of the 5.7l, 4.3l vortec setups? That have the a/c comp on driver side and alt on passenger. If so how much shipped to 94590
Thanks

Yes I do. I'll do one for the same cost, 225.00 plus shipping. Thanks, Tom

**tll74** · 01-31-2013, 02:16 AM

Quote:

Originally Posted by 67ctener

Sent you pm for big block set up
Posted via Mobile Device

Got the PM I'll get shipping cost tomorrow. I have one kit left and there 325.00 plus shipping. Thanks, Tom

Gryndar · 01-31-2013, 02:25 AM

Shipping to 94590 please
Thanks, Tom

**tll74** · 02-01-2013, 11:21 PM

Quote:

Originally Posted by Gryndar

Shipping to 94590 please
Thanks, Tom

Sorry, I got the cost and forgot to post it. 46.00
Thanks, Tom

**First c10** · 02-25-2013, 03:26 PM

Tom, what is the cost of a sbc setup to 93635?
thanks
scott

**tll74** · 02-26-2013, 02:38 AM

Quote:

Originally Posted by First c10

Tom, what is the cost of a sbc setup to 93635?
thanks
scott

Scott, 46.00 shipping. Thanks, Tom

**425HP409** · 02-26-2013, 11:51 AM

I will take the Big Block set up that you have left.
Charles

Expat_dude · 02-27-2013, 12:05 AM

Price for sbc setup to 39601. I am going with e fans so I don't need the clutch/fan
Posted via Mobile Device

**tll74** · 02-27-2013, 01:23 AM

Quote:

Originally Posted by 425HP409

I will take the Big Block set up that you have left.
Charles

Charles, It's yours.

Quote:

Originally Posted by Expat_dude

Price for sbc setup to 39601. I am going with e fans so I don't need the clutch/fan
Posted via Mobile Device

200.00 w/o the fan and clutch. 66.00 shipping.

Thanks, Tom

FickleFinn · 02-28-2013, 05:02 AM

I would like a sbc setup, do you have one and what is the price to 95688?

**tll74** · 02-28-2013, 08:07 PM

Quote:

Originally Posted by FickleFinn

I would like a sbc setup, do you have one and what is the price to 95688?

Yes, I do. 46.00 shipping to 95688. Thanks, Tom

01-13-2013, 01:11 PM	#107
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: Serpentine belt conversions Thanks Charles, it will ship tomorrow. __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

01-23-2013, 10:20 PM	#108
68basket Registered User Join Date: Dec 2012 Location: louisville, ky Posts: 480	Re: Serpentine belt conversions Do you have any more setups for sbc? I would need the angled thermostat housing if you have that also. zip is 40299 business address.

01-23-2013, 10:24 PM	#109
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Serpentine belt conversions What does a bb set up cost? Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

01-24-2013, 10:19 PM	#111
68basket Registered User Join Date: Dec 2012 Location: louisville, ky Posts: 480	Re: Serpentine belt conversions ill take one for sbc. Let me know how to pay and a time frame. Thanks, taylor

01-30-2013, 12:17 AM	#113
Gryndar Registered User Join Date: Mar 2012 Location: Pacheco, CA Posts: 32	Re: Serpentine belt conversions Do you have any of the 5.7l, 4.3l vortec setups? That have the a/c comp on driver side and alt on passenger. If so how much shipped to 94590 Thanks

01-30-2013, 03:21 PM	#114
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Serpentine belt conversions Sent you pm for big block set up Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

01-31-2013, 02:25 AM	#117
Gryndar Registered User Join Date: Mar 2012 Location: Pacheco, CA Posts: 32	Re: Serpentine belt conversions Shipping to 94590 please Thanks, Tom

02-25-2013, 03:26 PM	#119
First c10 Senior Member Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Serpentine belt conversions Tom, what is the cost of a sbc setup to 93635? thanks scott __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!

02-26-2013, 11:51 AM	#121
425HP409 425hp409 Join Date: Oct 2008 Location: Prosper Texas Posts: 834	Re: Serpentine belt conversions I will take the Big Block set up that you have left. Charles __________________ Charles 68 SWB, Dad bought new, now 396 & factory ac 64 Impala SS, 409 425HP, 4 speed AC 64 Bel Air Wagon, 400 Small Block 57 Bel Air all original 283 w/Factory Air 77 GMC Sprint, 454/425HP 67 Olds 442, all original 90 ZR1 Corvette

02-27-2013, 12:05 AM	#122
Expat_dude Registered User Join Date: Jul 2012 Location: Brookhaven, Ms/ Sakhalin Russia Posts: 370	Re: Serpentine belt conversions Price for sbc setup to 39601. I am going with e fans so I don't need the clutch/fan Posted via Mobile Device __________________ 1970 Chevy swb, project UGHH! 1987 Grand National http://s168.photobucket.com/albums/u.../1970%20Chevy/

02-28-2013, 05:02 AM	#124
FickleFinn Registered User Join Date: Apr 2011 Location: Vacaville, CA Posts: 148	Re: Serpentine belt conversions I would like a sbc setup, do you have one and what is the price to 95688? __________________ Make it a great day! Mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.