'67 C10 accelerator pedal rod firewall support??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FreeRangeChicken · 11-14-2013, 12:25 AM

Greetings all, I'm a noob here. Recently got my '67 C10 stepside and I'm in love.

It seems like there are a lot of sources to buy ALMOST any reproduction part you need. However, I've been searching high and low for an accelerator pedal rod firewall support (circled in the attached drawing) to no avail.

Could someone kindly point me toward a possible source for these source for these?

I've looked at Ecklers, LMC, Classic Industries, and various other places after some extensive Google searches. Can't figure out if no one is making them, or if I just haven't hit the right search term.

Thanks for your help.

Lattimer · 11-14-2013, 08:52 AM

I don't think anybody makes them. Best bet is to search the parts board on here and look for somebody parting out a truck.

**bigmac73** · 11-14-2013, 09:37 AM

could you upgrade to a 72 style? i think those are available online

quick60 · 11-14-2013, 09:37 AM

try one of these places.

http://www.stovebolt.com/ubbthreads/...27878&page=all

http://www.americanpickupsalvage.com/about-us/

http://www.oldchevytrucks.com/

FreeRangeChicken · 11-14-2013, 09:53 AM

Thanks for the tips, guys. I'll check out the parts forum and the other links.

BigMac73, I'm not sure about changing over. It's something I've thought about, but I need to research some more. I think on the later version the whole rod is in the cab and the cable (or carb rod) penetrates the firewall, where on the earlier ones the pedal rod penetrates the firewall and is 1/2 in / 1/2 out. Need to look at that some more. Don't think it would be just a bolt-on swap.

Lattimer · 11-14-2013, 11:37 AM

Quote:

Originally Posted by FreeRangeChicken

Thanks for the tips, guys. I'll check out the parts forum and the other links.

BigMac73, I'm not sure about changing over. It's something I've thought about, but I need to research some more. I think on the later version the whole rod is in the cab and the cable (or carb rod) penetrates the firewall, where on the earlier ones the pedal rod penetrates the firewall and is 1/2 in / 1/2 out. Need to look at that some more. Don't think it would be just a bolt-on swap.

The swap doesn't look to bad actually. Someone on here was making a kit to make it really easy. Its expensive, but Lokar has a kit as well. I considered doing that, but my old school setup still works well.

**'68OrangeSunshine** · 11-14-2013, 01:44 PM

I converted my '68 C/10 Stepside to an aftermarket/'72 GM set-up. It works great, and I'm happy with the result.
My needs were special: I have a 4-barrel [500 CFM ] Edelbrock carb on an Offy intake on a built 292 L6. The stock linkage was scrapped long ago, and the improvised push-pull bellcrank around a 90* angle to the carb's throttle lever had bad tendencies, like jamming, losing cotter pins, freezing up -- always at the worst times. Also I never got WOT out of my old carb. a 390 CFM Holley.
Since I put the cable on I have had no throttle issues. Maybe the only comment is that at the stoplight, I have to take my foot completely off the gas pedal now, as just light foot pressure causes a 100-200 RPM jump over a 700 RPM idle.

bbcmudtruck · 11-14-2013, 02:24 PM

I bought a complete 72 pedal assembly off of a board member on here as well as the conversion kit. If you look in the classifieds section, hes still making and selling the kits. They are very nice and easy to do. The only other thing you will need is a throttle cable. Or if you just want to stick with the rod assembly, go through the classifieds on here and there is always someone parting out trucks in there.

FreeRangeChicken · 11-15-2013, 12:08 AM

Found a couple of candidates over in the parts board. Thanks for the input.

70c10stepside · 11-15-2013, 12:32 AM

I had to get one from a local junkyard. No one makes them sadly.

**FirstOwner69** · 11-15-2013, 01:30 AM

Quote:

Originally Posted by FreeRangeChicken

Found a couple of candidates over in the parts board. Thanks for the input.

Here are two just posted on the parts board.

http://67-72chevytrucks.com/vboard/s...d.php?t=604362

FreeRangeChicken · 11-15-2013, 10:13 AM

Quote:

Originally Posted by FirstOwner69

Here are two just posted on the parts board.

http://67-72chevytrucks.com/vboard/s...d.php?t=604362

Got one of these. Thanks for the link.

lolcopter · 08-20-2018, 04:30 PM

I know this is an old thread but I am also looking for the same piece. Anyone know of anywhere to get one currently?

**michael bustamante** · 08-21-2018, 11:23 AM

on the parts board theres a guy parting a 69, that will have the pedal assy youre looking for

**'68OrangeSunshine** · 08-22-2018, 01:49 AM

I made up a hybrid pf '72GM/Lokar. GM parts inside the cab and Lokar in the engine bay,

**special-K** · 08-22-2018, 07:13 AM

Check the parts board.

nailer · 01-10-2020, 08:48 PM

Hunting accelerator firewall bracket for a 69 c10 any help would be greatly appreciated thanks

Andy4639 · 01-10-2020, 11:17 PM

I just took my 68 pedal assembly out and put my old 71 assembly in it. I used the lower original mounting hole as a good spot and drilled the other two holes. Went to O-Riellys and bought the Mr Gasket generic throttle cable setup. Had to drill a new hole for the cable but so far it seems like it will work just fine.

nailer · 01-10-2020, 11:26 PM

Thanks I'd like to get original if possible I'm still looking thanks

tj1970cst · 01-10-2020, 11:31 PM

Quote:

Originally Posted by Andy4639

I just took my 68 pedal assembly out and put my old 71 assembly in it. I used the lower original mounting hole as a good spot and drilled the other two holes. Went to O-Riellys and bought the Mr Gasket generic throttle cable setup. Had to drill a new hole for the cable but so far it seems like it will work just fine.

Where did you get that pretty brake booster? Most tenants and stuff I see are painted black.

**dmjlambert** · 01-11-2020, 02:05 AM

Quote:

Originally Posted by nailer

Thanks I'd like to get original if possible I'm still looking thanks

When I want original parts I post a want-to-buy ad in the parts section of the forum. Usually somebody responds fairly soon, and offers to sell and ship me the part for a reasonable price, and the hunt is over. I also occasionally post for-sale ads for stuff I want to sell. Have you checked the parts section of the forum to see if anybody has one for sale, or if anybody has a truck they are parting out? Members who have a premium subscription can post for-sale or want-to-buy ads. I recommend subscribing and posting your want.

Andy4639 · 01-11-2020, 08:35 AM

Quote:

Originally Posted by tj1970cst

Where did you get that pretty brake booster? Most tenants and stuff I see are painted black.

I ordered it and the master from inline tube sorry..

**HO455** · 01-11-2020, 11:29 AM

Quote:

Originally Posted by nailer

Thanks I'd like to get original if possible I'm still looking thanks

I believe that the 60-66 pedal is the same as the 67's.

tj1970cst · 01-11-2020, 09:40 PM

Quote:

Originally Posted by Andy4639

I ordered it and the master from O-Reilly's auto parts.

You figured it out, just realized my phone changed remans to tenants.

Thanks

**'68OrangeSunshine** · 01-11-2020, 11:24 PM

Quote:

Originally Posted by HO455

I believe that the 60-66 pedal is the same as the 67's.

No clue of prior years, but MY '67-'68 pedals pivot on a pair of stud-ball ends that are screwed into the floor.

11-14-2013, 12:25 AM	#1
FreeRangeChicken Registered User Join Date: Nov 2013 Location: Erie, Colorado Posts: 19	'67 C10 accelerator pedal rod firewall support??? Greetings all, I'm a noob here. Recently got my '67 C10 stepside and I'm in love. It seems like there are a lot of sources to buy ALMOST any reproduction part you need. However, I've been searching high and low for an accelerator pedal rod firewall support (circled in the attached drawing) to no avail. Could someone kindly point me toward a possible source for these source for these? I've looked at Ecklers, LMC, Classic Industries, and various other places after some extensive Google searches. Can't figure out if no one is making them, or if I just haven't hit the right search term. Thanks for your help. Attached Images Last edited by FreeRangeChicken; 11-14-2013 at 12:35 AM.

11-14-2013, 08:52 AM	#2
Lattimer Registered User Join Date: Jan 2013 Location: Mickleton, NJ Posts: 1,776	Re: '67 C10 accelerator pedal rod firewall support??? I don't think anybody makes them. Best bet is to search the parts board on here and look for somebody parting out a truck. __________________ Shawn 1970 Chevy C-10 SWB, 350, TKO 600 5 speed My build http://67-72chevytrucks.com/vboard/s...d.php?t=559881

11-14-2013, 09:37 AM	#3
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: '67 C10 accelerator pedal rod firewall support??? could you upgrade to a 72 style? i think those are available online __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

11-14-2013, 09:37 AM	#4
quick60 Registered User Join Date: Dec 2012 Location: Virginia Posts: 233	Re: '67 C10 accelerator pedal rod firewall support??? try one of these places. http://www.stovebolt.com/ubbthreads/...27878&page=all http://www.americanpickupsalvage.com/about-us/ http://www.oldchevytrucks.com/

11-14-2013, 09:53 AM	#5
FreeRangeChicken Registered User Join Date: Nov 2013 Location: Erie, Colorado Posts: 19	Re: '67 C10 accelerator pedal rod firewall support??? Thanks for the tips, guys. I'll check out the parts forum and the other links. BigMac73, I'm not sure about changing over. It's something I've thought about, but I need to research some more. I think on the later version the whole rod is in the cab and the cable (or carb rod) penetrates the firewall, where on the earlier ones the pedal rod penetrates the firewall and is 1/2 in / 1/2 out. Need to look at that some more. Don't think it would be just a bolt-on swap. __________________ Dave L. 1967 Chevy C10 SWB Stepside, L6 250 1967 Chevy C10 Fleetside, LS2 6.0L 1972 Chevy C10 LWB Fleetside, 350

11-14-2013, 01:44 PM	#7
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,038	Re: '67 C10 accelerator pedal rod firewall support??? I converted my '68 C/10 Stepside to an aftermarket/'72 GM set-up. It works great, and I'm happy with the result. My needs were special: I have a 4-barrel [500 CFM ] Edelbrock carb on an Offy intake on a built 292 L6. The stock linkage was scrapped long ago, and the improvised push-pull bellcrank around a 90* angle to the carb's throttle lever had bad tendencies, like jamming, losing cotter pins, freezing up -- always at the worst times. Also I never got WOT out of my old carb. a 390 CFM Holley. Since I put the cable on I have had no throttle issues. Maybe the only comment is that at the stoplight, I have to take my foot completely off the gas pedal now, as just light foot pressure causes a 100-200 RPM jump over a 700 RPM idle. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

11-14-2013, 02:24 PM	#8
bbcmudtruck Registered User Join Date: Nov 2012 Location: ravenwood, mo Posts: 709	Re: '67 C10 accelerator pedal rod firewall support??? I bought a complete 72 pedal assembly off of a board member on here as well as the conversion kit. If you look in the classifieds section, hes still making and selling the kits. They are very nice and easy to do. The only other thing you will need is a throttle cable. Or if you just want to stick with the rod assembly, go through the classifieds on here and there is always someone parting out trucks in there.

11-15-2013, 12:08 AM	#9
FreeRangeChicken Registered User Join Date: Nov 2013 Location: Erie, Colorado Posts: 19	Re: '67 C10 accelerator pedal rod firewall support??? Found a couple of candidates over in the parts board. Thanks for the input. __________________ Dave L. 1967 Chevy C10 SWB Stepside, L6 250 1967 Chevy C10 Fleetside, LS2 6.0L 1972 Chevy C10 LWB Fleetside, 350

11-15-2013, 12:32 AM	#10
70c10stepside Registered User Join Date: Jun 2011 Location: Taylorsville, Georgia Posts: 482	Re: '67 C10 accelerator pedal rod firewall support??? I had to get one from a local junkyard. No one makes them sadly.

08-20-2018, 04:30 PM	#13
lolcopter Registered User Join Date: Nov 2017 Location: fernandina beach Posts: 36	Re: '67 C10 accelerator pedal rod firewall support??? I know this is an old thread but I am also looking for the same piece. Anyone know of anywhere to get one currently?

08-21-2018, 11:23 AM	#14
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: '67 C10 accelerator pedal rod firewall support??? on the parts board theres a guy parting a 69, that will have the pedal assy youre looking for __________________ 1967custom

08-22-2018, 01:49 AM	#15
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,038	Re: '67 C10 accelerator pedal rod firewall support??? I made up a hybrid pf '72GM/Lokar. GM parts inside the cab and Lokar in the engine bay, __________________ Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 08-22-2018 at 02:56 AM.

08-22-2018, 07:13 AM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: '67 C10 accelerator pedal rod firewall support??? Check the parts board. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-10-2020, 08:48 PM	#17
nailer Registered User Join Date: May 2016 Location: newberry.s.c. Posts: 12	Re: '67 C10 accelerator pedal rod firewall support??? Hunting accelerator firewall bracket for a 69 c10 any help would be greatly appreciated thanks

01-10-2020, 11:17 PM	#18
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: '67 C10 accelerator pedal rod firewall support??? I just took my 68 pedal assembly out and put my old 71 assembly in it. I used the lower original mounting hole as a good spot and drilled the other two holes. Went to O-Riellys and bought the Mr Gasket generic throttle cable setup. Had to drill a new hole for the cable but so far it seems like it will work just fine. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

01-10-2020, 11:26 PM	#19
nailer Registered User Join Date: May 2016 Location: newberry.s.c. Posts: 12	Re: '67 C10 accelerator pedal rod firewall support??? Thanks I'd like to get original if possible I'm still looking thanks

Register or Log In To remove these advertisements.