Finally "Silvers" build thread!! ('78 swb 2wd silverado) - Page 55 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC91 · 05-15-2010, 12:11 PM

GOD BLESS MAN!!! I love it! Cant wait till you get this thing done and take it for a test drive. Congrats though on getting this far

draggin86 · 05-15-2010, 03:41 PM

hahahaha congrats dude those videos cracked me up!

**nlped** · 05-15-2010, 04:01 PM

Quote:

Originally Posted by Driveway Dreams

Well, it will look good with engine covers.

Sorry Gerald, I couldn't resist

. I have no doubt they will look great.

Congratulations Dennis, Now, not only does it look great, but it sounds great too!

79gmc5.3 · 05-15-2010, 10:47 PM

Congrats buddy!!!!!

That's the same grin I had on my face and it scared the crap out of me too!!!!

menace121978 · 05-16-2010, 07:23 AM

thanks guys!

last night i had a buddy bring over his tac module and pedal from his '02 esclade motor swap and i had the same result... just idle. soooo, its either 1 of the 2 sensors on the t/b or a problem in the pcm. he's going to bring over his pcm and let me try that tomorrow... if i have the same problem (no throttle response) then its the tp sensor. if she runs and i have throttle is the tuning in the damn computer...

any insight or thoughts here guys? btw, where's Bob The Builder at??

54Caddy · 05-16-2010, 12:02 PM

damn badass man! now put a milk crate for a seat and drive it ahahahah

80chevyshortbox · 05-16-2010, 12:16 PM

nice that sounds awsome. keep up the good work.

54Caddy · 05-16-2010, 08:44 PM

You can find some one that has a snap on vantage tool. Then test the tps sensor and look at the graph and move the throttle and see if it responds, that test is done just with ignition on i believe.

Driveway Dreams · 05-20-2010, 12:00 AM

Dennis, I keep going back to watch the video clips. I love how it wants to sound. Should be killer when you get it dialed in.

draggin86 · 05-20-2010, 01:00 AM

updates playa??

menace121978 · 05-20-2010, 09:37 AM

ordered a new water pump through Larry at specialized parts planet. should be here today.(mine started leaking like a sieve afte i filled it through the top hose). i sent the pcm and tac module back to current performance on monday. should have it by tomorrow. Jarad from cp said the tac module is different from the program he reflashed the pcm with to make the 4l80e work. so they werent communicating. thats why no throttle control. he's overnighting it back to me.

i hope this takes care of all the little bugs and problems so i can get a good video for you guys

**nlped** · 05-20-2010, 09:44 AM

I'm waiting on pins & needles! Okay, really, I'm waiting with beer & a BFH

.

Silver is really coming together.

JohnC · 05-20-2010, 01:22 PM

Quote:

Originally Posted by nlped

I'm waiting on pins & needles! Okay, really, I'm waiting with beer & a BFH

.

Silver is really coming together.

, and X2

STOCKISH · 05-23-2010, 08:48 PM

Tell ya what, I think once we get these done and running we'll have to take a week off and do a road trip to somewhere central U.S. and meet up with all the other interested squares and do a nice mountain drive or something.

mcbassin · 05-23-2010, 09:19 PM

hey you should do a road trip to Central Oklahoma.

JohnC · 05-24-2010, 11:35 AM

Quote:

Originally Posted by mcbassin

hey you should do a road trip to Central Oklahoma.

glock35ipsc · 05-24-2010, 12:03 PM

Quote:

Originally Posted by menace121978

i sent the pcm and tac module back to current performance on monday. should have it by tomorrow. Jarad from cp said the tac module is different from the program he reflashed the pcm with to make the 4l80e work. so they werent communicating. thats why no throttle control. he's overnighting it back to me.

That's good to hear! Quirky little things, aren't they!?!

I'm still chuckling over your vids!

mcbassin · 05-24-2010, 08:30 PM

Awesome to hear that bad boy running! Lot of time and hard work is paying off for you.

menace121978 · 05-25-2010, 08:10 AM

thanks guys! after everything is said and done we DEFINITELY have to get everyone together in the middle! i think thats a great idea... we have all been watching and helping each other build their trucks... then to finish them and be able to see them in person and meet each other would be FANTASTIC! we've all become good friends through the board and meeting in person would be like icing on the cake... and we could eat it together!

JohnC · 05-25-2010, 08:43 AM

Quote:

Originally Posted by menace121978

thanks guys! after everything is said and done we DEFINITELY have to get everyone together in the middle! i think thats a great idea... we have all been watching and helping each other build their trucks... then to finish them and be able to see them in person and meet each other would be FANTASTIC! we've all become good friends through the board and meeting in person would be like icing on the cake... and we could eat it together!

Hear, Hear!

BruthaMan · 05-25-2010, 09:34 AM

Congrats on gettin' her fired off, Dennis! Sounds fantastic!

Testicular granditus

JohnC · 05-25-2010, 04:00 PM

Quote:

Originally Posted by BruthaMan

Congrats on gettin' her fired off, Dennis! Sounds fantastic!

Testicular granditus

CLASSIC87' · 05-26-2010, 07:40 AM

JESUS TITS DUDE!!! You are totally amazing to be able to build something like this... peoply like you have my upmost respect to do things so clean and perfect. I would love to be your neighbor so I could sit in a lawn chair and just watch you in action

... doing what you are doing will be an inspiration to MANY who are wanting to build their dream mobile. AWESOME WORKMANSHIP!!!

Anthony

STOCKISH · 05-26-2010, 07:56 AM

Amen brother!

**nlped** · 05-26-2010, 07:58 AM

Quote:

Originally Posted by 1972SuperCheyenne

Amen brother!

x2!!! Yours too, SuperCheyenne!

05-15-2010, 12:11 PM	#1351
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) GOD BLESS MAN!!! I love it! Cant wait till you get this thing done and take it for a test drive. Congrats though on getting this far __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

05-15-2010, 03:41 PM	#1352
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) hahahaha congrats dude those videos cracked me up!

05-15-2010, 10:47 PM	#1354
79gmc5.3 6.0L power......... Join Date: Dec 2009 Location: Acworth GA Posts: 292	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Congrats buddy!!!!! That's the same grin I had on my face and it scared the crap out of me too!!!! __________________ What ever the mind of man can conceive......... he can achieve! My built thread http://67-72chevytrucks.com/vboard/s...d.php?t=375914 1979 GMC Sierra 6.0 L 4L60E 1995 Mustang GT 347

05-16-2010, 07:23 AM	#1355
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) thanks guys! last night i had a buddy bring over his tac module and pedal from his '02 esclade motor swap and i had the same result... just idle. soooo, its either 1 of the 2 sensors on the t/b or a problem in the pcm. he's going to bring over his pcm and let me try that tomorrow... if i have the same problem (no throttle response) then its the tp sensor. if she runs and i have throttle is the tuning in the damn computer... any insight or thoughts here guys? btw, where's Bob The Builder at?? __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

05-16-2010, 12:02 PM	#1356
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) damn badass man! now put a milk crate for a seat and drive it ahahahah __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-16-2010, 12:16 PM	#1357
80chevyshortbox Registered User Join Date: Jun 2009 Location: lethbridge Posts: 269	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) nice that sounds awsome. keep up the good work.

05-16-2010, 08:44 PM	#1358
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) You can find some one that has a snap on vantage tool. Then test the tps sensor and look at the graph and move the throttle and see if it responds, that test is done just with ignition on i believe. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

05-20-2010, 12:00 AM	#1359
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dennis, I keep going back to watch the video clips. I love how it wants to sound. Should be killer when you get it dialed in. __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

05-20-2010, 01:00 AM	#1360
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) updates playa??

05-20-2010, 09:37 AM	#1361
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) ordered a new water pump through Larry at specialized parts planet. should be here today.(mine started leaking like a sieve afte i filled it through the top hose). i sent the pcm and tac module back to current performance on monday. should have it by tomorrow. Jarad from cp said the tac module is different from the program he reflashed the pcm with to make the 4l80e work. so they werent communicating. thats why no throttle control. he's overnighting it back to me. i hope this takes care of all the little bugs and problems so i can get a good video for you guys __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

05-20-2010, 09:44 AM	#1362
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) I'm waiting on pins & needles! Okay, really, I'm waiting with beer & a BFH . Silver is really coming together. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-23-2010, 08:48 PM	#1364
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Tell ya what, I think once we get these done and running we'll have to take a week off and do a road trip to somewhere central U.S. and meet up with all the other interested squares and do a nice mountain drive or something. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

05-23-2010, 09:19 PM	#1365
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) hey you should do a road trip to Central Oklahoma. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-24-2010, 08:30 PM	#1368
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Awesome to hear that bad boy running! Lot of time and hard work is paying off for you. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-25-2010, 08:10 AM	#1369
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) thanks guys! after everything is said and done we DEFINITELY have to get everyone together in the middle! i think thats a great idea... we have all been watching and helping each other build their trucks... then to finish them and be able to see them in person and meet each other would be FANTASTIC! we've all become good friends through the board and meeting in person would be like icing on the cake... and we could eat it together! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list



Register or Log In To remove these advertisements.

05-25-2010, 09:34 AM	#1371
BruthaMan US Army Veteran Join Date: Nov 2008 Location: Central Texas Posts: 1,049	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Congrats on gettin' her fired off, Dennis! Sounds fantastic! Testicular granditus __________________ 1972 C10 Highlander - The making of a daily driver

05-26-2010, 07:40 AM	#1373
CLASSIC87' OL BLUU Join Date: Mar 2004 Location: WICHITA, KS. Posts: 1,065	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) JESUS TITS DUDE!!! You are totally amazing to be able to build something like this... peoply like you have my upmost respect to do things so clean and perfect. I would love to be your neighbor so I could sit in a lawn chair and just watch you in action ... doing what you are doing will be an inspiration to MANY who are wanting to build their dream mobile. AWESOME WORKMANSHIP!!! Anthony __________________ More Drop and pics... whatch'a think?: http://67-72chevytrucks.com/vboard/s...d.php?t=249927 My recent 2wd Blazer progress thread: http://67-72chevytrucks.com/vboard/s...d.php?t=393427 http://67-72chevytrucks.com/vboard/s...d.php?t=394870 Last edited by CLASSIC87'; 05-26-2010 at 07:41 AM.

05-26-2010, 07:56 AM	#1374
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Amen brother! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

Register or Log In To remove these advertisements.