The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-05-2017, 11:55 AM   #1
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Need Help with Headlight Wiring 1956 Chevy Truck

Well I took of the headlights and marked where each wire went but time went by the wayside (3 years, long story) and before I knew it when I went to install them the labels were blank(disappearing magic permanent marker). So now I don't know which wires go where. I've looked at the forums and online but cant fine anything. So I'm hoping one of you could help me out. Here a picture of the wires (mine) and the headlight (found online but its pretty much the same thing). What color goes where?

Thanks in advance for your help with this.

Mike
Attached Images
  
BigMike56-72 is offline   Reply With Quote
Old 02-05-2017, 12:56 PM   #2
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

You are missing the outside plastic part that holds the three wires. One of my headlights was like that, I ordered a new plug from LMC and spliced it in. The green wire is hi beam, the tan wire is low beam and the black is ground.
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 02-05-2017, 02:46 PM   #3
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,134
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by BigMike56-72 View Post
Well I took of the headlights and marked where each wire went but time went by the wayside (3 years, long story) and before I knew it when I went to install them the labels were blank(disappearing magic permanent marker). So now I don't know which wires go where. I've looked at the forums and online but cant fine anything. So I'm hoping one of you could help me out. Here a picture of the wires (mine) and the headlight (found online but its pretty much the same thing). What color goes where?

Thanks in advance for your help with this.

Mike
You need something like this for those headlights. The plastic type may melt
Head light Socket
dwcsr is offline   Reply With Quote
Old 02-07-2017, 06:31 PM   #4
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by capnduane View Post
You are missing the outside plastic part that holds the three wires. One of my headlights was like that, I ordered a new plug from LMC and spliced it in. The green wire is hi beam, the tan wire is low beam and the black is ground.
Thanks for the reply. How do I know which prong is the hi beam, low beam,ground? When I removed them, the clips shown in the picture were just clipped onto the headlight directly. Are the two vertical prongs (on the headlight) Hi and Lo Beam and the horizontal prong the ground?


Mike
BigMike56-72 is offline   Reply With Quote
Old 02-07-2017, 07:34 PM   #5
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

The plastic body of the plug has the wire clips in it and only plugs in one way into the rear of the headlight. I think the horizontal prong is the ground and the two vertical prongs are the hi and low. At least that's what the wiring diagram in my shop manual shows?
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 02-07-2017, 08:04 PM   #6
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Thanks again. I will try it out when I get home tonight.
BigMike56-72 is offline   Reply With Quote
Old 02-08-2017, 02:12 AM   #7
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

So I tried it out tonight and the lights worked but they worked both ways meaning that I swapped the green (pass) and the red (drive) wires and the light still worked. Black to ground. My question is which is the right way? I have the following adapter (shown in picture) that I am using. Thanks again for your help with this.



Mike
Attached Images
  
BigMike56-72 is offline   Reply With Quote
Old 02-08-2017, 01:16 PM   #8
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Here's wiring diagram for 55 truck. The plug you have is not the stock one. The pigtail I replaced on my truck was a replica of the original with the correct color wires already installed in it. I would go out and pull the headlight out of my truck, and check the orientation of the wires, but my back has flared up and don't feel up to the task! Are you sure the wires are correctly plugged into your dimmer switch?
Attached Images
 
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 02-08-2017, 01:27 PM   #9
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by capnduane View Post
Here's wiring diagram for 55 truck. The plug you have is not the stock one. The pigtail I replaced on my truck was a replica of the original with the correct color wires already installed in it. I would go out and pull the headlight out of my truck, and check the orientation of the wires, but my back has flared up and don't feel up to the task! Are you sure the wires are correctly plugged into your dimmer switch?


As far as I know they are. I never removed or replaced the dimmer switch. I mean I did remove it but I did not disconnect any wires that were connected to it. So it's the same as when I first got the truck. I got the pigtail from the Truck Shop in OC (I figured it would work since they knew what I was looking for when I went in there) Thanks again for your help. I know too well about back issues as well. Hope you feel better soon. Maybe another forum member can chime in and help me out as well?

Mike
BigMike56-72 is offline   Reply With Quote
Old 02-08-2017, 02:14 PM   #10
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Sorry I wasn't of more help, but with the plug you have, a WAG would be green to ground, black to pass and tan to drive. Good luck! Looking at the back of the headlight this would be tan to right spade, black to center horizontal spade and green to left spade.
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"

Last edited by capnduane; 02-08-2017 at 02:19 PM.
capnduane is offline   Reply With Quote
Old 02-08-2017, 03:11 PM   #11
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by capnduane View Post
Sorry I wasn't of more help, but with the plug you have, a WAG would be green to ground, black to pass and tan to drive. Good luck! Looking at the back of the headlight this would be tan to right spade, black to center horizontal spade and green to left spade.
What does WAG mean? Sorry. LOL. Thanks again for your help. You have been a great help for me so far.

Mike
BigMike56-72 is offline   Reply With Quote
Old 02-08-2017, 05:51 PM   #12
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

WAG=wild ass guess
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 02-08-2017, 10:22 PM   #13
Old57
Registered User
 
Join Date: Apr 2015
Location: Wichita Kansas
Posts: 455
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Is this what you are looking for?
Attached Images
 
__________________
My 57 GMC build
Old57 is offline   Reply With Quote
Old 02-08-2017, 11:10 PM   #14
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,052
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Sorry if this is a DA (dummb ...) answer, but wiring is pretty simple if you break it down.
Every circuit is just a path from the battery to something and back to the battery. Everything comes from the battery, and goes back to the battery. Yes, when running the alternator/generator is there.
Think of a circle drawn on whatever, or in your mind. The circle is the wiring.
Erase a bit of the circle and put a battery there. Erase another part and put a light there. You have a light that's always on.
Add a switch in the circle and you can turn off the light. All the switch does is connect the circle or disconnect.

The lines on a wiring diagram are just flattening the circle so they can put lots of them on the same page. All are the same thing--battery to switch (or control device), back to the battery. 100% of the time.

Electricity can be simplified for vehicles. For one, it isn't likely to hurt you. We have 3 parts.

Electromotive Force, or Voltage (E, EMF), which is related to the battery and charging system. Typically 12V in a car/light truck. This is constant as long as the system is working.
Load, or resistance (R) (lets keep it simple), or the things using power.
The 2 above create current or intensity (I) which represents the electrons provided by the battery and flowing through the circle.

The relationship is I=V/R or current is voltage divided by current. Or I/V=R, or I/R=V, etc.
The point is as resistance increases (dim lights)/decreases, current drops/increases, or as voltage decreases (dead battery), current decreases (car won't start).

Of course, since wiring exists in the real world, things rot so wiring goes bad, and/or connections get poor. Or, stated another way, resistance increases. More resistance, less current, more heat somewhere it doesn't belong, no bueno...
franken is offline   Reply With Quote
Old 02-08-2017, 11:46 PM   #15
capnduane
Registered User
 
capnduane's Avatar
 
Join Date: Jan 2014
Location: Moreno Valley, Calif.
Posts: 244
Re: Need Help with Headlight Wiring 1956 Chevy Truck

There ya go! left- black, top/center- tan, and right- green. Worth a try, Good luck!
__________________
'55 Chevy 1/2ton pickup w/ Pontiac 350 and Muncie M21 close ratio 4speed "Red Ryder"
capnduane is offline   Reply With Quote
Old 02-09-2017, 12:11 AM   #16
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,134
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Wire it like this and plug it in
Attached Images
 
dwcsr is offline   Reply With Quote
Old 02-09-2017, 12:56 AM   #17
vintovka
Registered User
 
vintovka's Avatar
 
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,771
Re: Need Help with Headlight Wiring 1956 Chevy Truck

I just rewired my all my 54 lights. headlights, turn, park and taillights. Took a while but straight forward. Be sure to double Check each connection before you crimp in connector and cover every splice with shrink tube. I have a full length schematic for mine and it was invaluable for wiring. A conductivity wand with a light and multi meter are nice to have as well. A large box of extra fuses are a must for us amateurs.
vintovka is offline   Reply With Quote
Old 02-09-2017, 01:24 AM   #18
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Wow you guys are awesome. I am going to wire it up tonight. Thanks again for all your guys help.

Mike
BigMike56-72 is offline   Reply With Quote
Old 02-09-2017, 08:39 AM   #19
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,149
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Mike, if you need a photo of a GM connector I can get one tonight.
1project2many is offline   Reply With Quote
Old 02-09-2017, 11:58 AM   #20
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by 1project2many View Post
Mike, if you need a photo of a GM connector I can get one tonight.
GM connector? Is that the original connector? More pics never hurt anyone.

Thanks

Mike
BigMike56-72 is offline   Reply With Quote
Old 02-10-2017, 08:54 AM   #21
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,149
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Yep... the original connector. We were buried in snow last night but I'll get one posted.
1project2many is offline   Reply With Quote
Old 02-13-2017, 10:16 PM   #22
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Quote:
Originally Posted by 1project2many View Post
Yep... the original connector. We were buried in snow last night but I'll get one posted.
Thanks!

Mike
BigMike56-72 is offline   Reply With Quote
Old 02-14-2017, 12:26 PM   #23
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,149
Re: Need Help with Headlight Wiring 1956 Chevy Truck

I'm sorry that I haven't addressed this. We had snow again this weekend so more work. Here is confirmed wiring w/ OEM colors. I will get the actual connector photo tonight if still needed.

1project2many is offline   Reply With Quote
Old 02-14-2017, 05:47 PM   #24
BigMike56-72
Registered User
 
BigMike56-72's Avatar
 
Join Date: Jul 2016
Location: Los Angeles/SGV
Posts: 74
Re: Need Help with Headlight Wiring 1956 Chevy Truck

Thank you so much for confirming this for me. I appreciate it.

Love the username btw 1project2many. that is me for sure. lol.

Mike
BigMike56-72 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:15 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com