ls6 intake and ls6 valley pan questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my kids toy · 08-14-2018, 05:36 PM

I have a lm7 engine and I am swapping the truck intake to the ls6 car intake, I am replacing all the brackets on the front and I have a complete intake and I am doing a stand alone harness so the rails/injectors I have figured out.

The questions I have is
Should I use the ls6 valley cover or stick with the stock valley cover ?

seeing I need to get a harness should I use the tbc or get a tbw ?

With the LS6 intake do I have to block any holes off or change any ?

sorry for the questions, I have been doing a lot of research but every little tid bit I get is from different posts and a lot of things I am not doing and most of it just confuses me.

Do I also need this ?

08-14-2018, 05:36 PM	#1
my kids toy Registered User Join Date: May 2018 Location: Grand Haven, mi Posts: 270	ls6 intake and ls6 valley pan questions I have a lm7 engine and I am swapping the truck intake to the ls6 car intake, I am replacing all the brackets on the front and I have a complete intake and I am doing a stand alone harness so the rails/injectors I have figured out. The questions I have is Should I use the ls6 valley cover or stick with the stock valley cover ? seeing I need to get a harness should I use the tbc or get a tbw ? With the LS6 intake do I have to block any holes off or change any ? sorry for the questions, I have been doing a lot of research but every little tid bit I get is from different posts and a lot of things I am not doing and most of it just confuses me. Do I also need this ? Last edited by my kids toy; 08-15-2018 at 04:11 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.