KS 1 blazer and 1 jimmy getting parted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-25-2011, 11:02 PM

I've got them most the way parted already, but I'm going to clean up what is left and haul off leftovers. I took these pics late this evening so I'll get seom more pics Mon after work. Both have titles. Bodies are trash, nothing good, windshield frames are rusty
rearends $100 each
disc brake front end $100
crossmembers $30 plus shipping each
leaf springs
Thanks Randy

Ridnhi · 09-25-2011, 11:46 PM

I am interested in the farthest forward spring mount on the drivers side front spring. I need where spring mounts and where rad. support bolts up. Price shipped to 62959? Thanks
Posted via Mobile Device

k5hart · 09-26-2011, 06:48 AM

How are the windshield frame on either one?

kc69 · 09-26-2011, 09:54 AM

I'm needing a hard top, are those any good that you have, and how much?? Thanks

**29od1** · 09-26-2011, 01:13 PM

Randy,

Do you have any sun visor assemblies for either one?

**29od1** · 09-26-2011, 01:15 PM

How are the doors as well?

teeitup · 09-26-2011, 05:54 PM

Ridnhi, I have these off already $20 plus shipping each.

K5hart, sorry they both are rusty

KC69, pics coming in a bit, I also have a decent double wall top for $60

29od1, the green one has some if I can get them off. No good blazer doors

Thanks Randy

teeitup · 09-26-2011, 05:56 PM

single wall pics

teeitup · 09-26-2011, 05:57 PM

more

teeitup · 09-26-2011, 05:58 PM

IMO the back driver corner is the worse part, otehr spots are just small cracks

**6t727t2** · 09-26-2011, 06:10 PM

Hey Randy, Any top to body brackets, door/jamb shims, wiring harness from single wall top, hatch guts/hinges? Thanks

teeitup · 09-26-2011, 06:23 PM

Harry, I've got quite a few things, I'll get pics Tues after work. Thanks Randy

72gmcshorty · 09-26-2011, 08:23 PM

any of the rear quarters damage/rust free? (specifically area around tail lights?)

meathead95 · 09-26-2011, 08:24 PM

theses look familiar did you get them in indianola iowa?

teeitup · 09-26-2011, 08:55 PM

72gmcshorty, I'll look Tues

Meathead95, yes thats where I got them. The pics made them look better than are unfortunately

Thanks Randy

meathead95 · 09-26-2011, 08:58 PM

wish you would have said something i looked at them im only 30 miles north of where they are... man you sure go along way to get these trucks. holler if you need me to look at something in the future in the des moines area.

teeitup · 09-26-2011, 09:23 PM

Yes going up there for these was a pain, thats about as far as I go, or I mean used to go, gas prices are killing me on going very far. Thanks for the offer though I still look up that way. Thanks Randy

Ridnhi · 09-26-2011, 10:53 PM

teeitup- I'll take the nicer of the two spring mounts. let me know on shipping.

I am also interested in door jam shims for one side if you have them. i have one side already. Thanks, Eli

teeitup · 09-26-2011, 11:12 PM

Eli, I'll get quote Tues after work, and yes I have some shims too. Thanks Randy

47thriftmaster · 09-26-2011, 11:19 PM

Randy,
How are the wheels? I had 2 out of 5 that were bad so looking for two to replace. The wheels need to be the stock 15x6 6 lug with 4" backspacing for my Blazer. If you have pics of your best 2 and shipping cost.

Thanks, Monte

teeitup · 09-26-2011, 11:27 PM

Monte, I'll check backspacing, but I think they are 3.5. Thanks Randy

Ridnhi · 09-26-2011, 11:38 PM

Randy- Thanks, Eli

**29od1** · 09-27-2011, 08:07 AM

How much would you want for the visors? I'm heading up that way in a few weeks and could pick them up then.
Thanks,
David

**1970greenc10** · 09-27-2011, 10:58 AM

How much for a set of rear spring mounts and a pair of rear shock mounts. Shipping to 14075. Could I see some pics please. Thanks,Marty

teeitup · 09-27-2011, 04:24 PM

David, $20 for them

Marty, not sure if I'm cutting frame down that far yet

Thanks Randy

09-25-2011, 11:02 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	1 blazer and 1 jimmy getting parted I've got them most the way parted already, but I'm going to clean up what is left and haul off leftovers. I took these pics late this evening so I'll get seom more pics Mon after work. Both have titles. Bodies are trash, nothing good, windshield frames are rusty rearends $100 each disc brake front end $100 crossmembers $30 plus shipping each leaf springs Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-25-2011, 11:46 PM	#2
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: 1 blazer and 1 jimmy getting parted I am interested in the farthest forward spring mount on the drivers side front spring. I need where spring mounts and where rad. support bolts up. Price shipped to 62959? Thanks Posted via Mobile Device __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

09-26-2011, 06:48 AM	#3
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Re: 1 blazer and 1 jimmy getting parted How are the windshield frame on either one? __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

09-26-2011, 09:54 AM	#4
kc69 Registered User Join Date: Sep 2009 Location: Kansas city, Mo. Posts: 28	Re: 1 blazer and 1 jimmy getting parted I'm needing a hard top, are those any good that you have, and how much?? Thanks

09-26-2011, 01:13 PM	#5
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 1 blazer and 1 jimmy getting parted Randy, Do you have any sun visor assemblies for either one?

09-26-2011, 01:15 PM	#6
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 1 blazer and 1 jimmy getting parted How are the doors as well?

09-26-2011, 05:54 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted Ridnhi, I have these off already $20 plus shipping each. K5hart, sorry they both are rusty KC69, pics coming in a bit, I also have a decent double wall top for $60 29od1, the green one has some if I can get them off. No good blazer doors Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 05:56 PM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted single wall pics Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 05:57 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted more Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 05:58 PM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted IMO the back driver corner is the worse part, otehr spots are just small cracks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 06:10 PM	#11
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,430	Re: 1 blazer and 1 jimmy getting parted Hey Randy, Any top to body brackets, door/jamb shims, wiring harness from single wall top, hatch guts/hinges? Thanks

09-26-2011, 06:23 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted Harry, I've got quite a few things, I'll get pics Tues after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 08:23 PM	#13
72gmcshorty Registered User Join Date: Jul 2001 Location: North Delta, British Columbia Posts: 1,344	Re: 1 blazer and 1 jimmy getting parted any of the rear quarters damage/rust free? (specifically area around tail lights?) __________________ 1992 Gmc 2wd 1972 Chevy Blazer 2wd

09-26-2011, 08:24 PM	#14
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1 blazer and 1 jimmy getting parted theses look familiar did you get them in indianola iowa? __________________ 72 2wd blazer 72 swb 4x4

09-26-2011, 08:55 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted 72gmcshorty, I'll look Tues Meathead95, yes thats where I got them. The pics made them look better than are unfortunately Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-26-2011, 08:58 PM	#16
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1 blazer and 1 jimmy getting parted wish you would have said something i looked at them im only 30 miles north of where they are... man you sure go along way to get these trucks. holler if you need me to look at something in the future in the des moines area. __________________ 72 2wd blazer 72 swb 4x4

09-26-2011, 09:23 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted Yes going up there for these was a pain, thats about as far as I go, or I mean used to go, gas prices are killing me on going very far. Thanks for the offer though I still look up that way. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 10:53 PM	#18
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: 1 blazer and 1 jimmy getting parted teeitup- I'll take the nicer of the two spring mounts. let me know on shipping. I am also interested in door jam shims for one side if you have them. i have one side already. Thanks, Eli __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

09-26-2011, 11:12 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted Eli, I'll get quote Tues after work, and yes I have some shims too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 11:19 PM	#20
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 1 blazer and 1 jimmy getting parted Randy, How are the wheels? I had 2 out of 5 that were bad so looking for two to replace. The wheels need to be the stock 15x6 6 lug with 4" backspacing for my Blazer. If you have pics of your best 2 and shipping cost. Thanks, Monte

09-26-2011, 11:27 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted Monte, I'll check backspacing, but I think they are 3.5. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-26-2011, 11:38 PM	#22
Ridnhi Registered User Join Date: Nov 2010 Location: Marion, IL Posts: 719	Re: 1 blazer and 1 jimmy getting parted Randy- Thanks, Eli __________________ 1972 K5 Auto 4x4 factory air 2007 Silverado extended cab Z71

09-27-2011, 08:07 AM	#23
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 1 blazer and 1 jimmy getting parted How much would you want for the visors? I'm heading up that way in a few weeks and could pick them up then. Thanks, David

09-27-2011, 10:58 AM	#24
1970greenc10 Senior Member Join Date: Oct 2008 Location: Forestville, NY Posts: 225	Re: 1 blazer and 1 jimmy getting parted How much for a set of rear spring mounts and a pair of rear shock mounts. Shipping to 14075. Could I see some pics please. Thanks,Marty __________________ My Chevys 79 caprice classic 70 c/10 69 k/10 03 silverado

09-27-2011, 04:24 PM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 1 blazer and 1 jimmy getting parted David, $20 for them Marty, not sure if I'm cutting frame down that far yet Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.