67 panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

deadeye02 · 09-06-2011, 06:28 PM

G'day guys,
I've got a 67 Panel Truck that I use for my work truck. The RHS barn door on the back has only got a latch on the top, the bottom one has been missing since I have owned it. It looks like it is probably the same thing as the top one, just with a different operating rod. I can make the rod, but would like to buy the mechanism. I expect the Suburban is the same and the same design is probably used on lots of other years trucks as well. i will post a picture of the truck when I figure out how.

pritch · 09-06-2011, 09:27 PM

Panels in Australia-I love it

Welcome from Northern Utah.

I think, due to the Panels being work trucks, most people get tired of not being able to slide stuff in and out without having to lift it up over that latch, since it sticks up just a little bit. Mine's gone too, and I think the PO (previous owner) got tired of it when he had a cutting torch in his hand.

Check out the sub-forum
http://67-72chevytrucks.com/vboard/f...splay.php?f=38

There's a thread there with hundreds of pictures of Panels

deadeye02 · 09-07-2011, 01:23 AM

Yeah, this truck has had a hard life too. If I had known how rusty it was when i first saw it I would have left it there.
Anyway, the bit I'm talking about is the little mechanism in the door itself, the bit on the floor (the striker?) is still there with nothing to hook onto it.

Thanks for the link, it's interesting to see what others do.

heeroyue2002 · 09-07-2011, 02:18 AM

theres a 68 panel at the local junkyard over here

deadeye02 · 09-07-2011, 02:25 AM

Thanks for that. Can you give me a name, phone number, email address or something and I'll try to find out if they can help me.

heeroyue2002 · 09-07-2011, 02:27 AM

pick n pull. in fresno, california.
if u want i can probably head over and take a pix or two and possible remove it for u.

deadeye02 · 09-07-2011, 03:00 AM

Hey Thank You. That would be great, but I don't want you to make a special trip.
If you do go, the bit I'm looking for is the little catch mechanism that sort of works like "rolling fingers" and is released by the door handle. I can take a picture of the top one if you think it would help.

hugger6933 · 09-07-2011, 07:15 AM

I am not in this in any way, but this is what this forum is about . People helping people, complete strangers with only a truck in common. Renews my love for poeple this morning and may change my day.

09-06-2011, 06:28 PM	#1
deadeye02 Registered User Join Date: Sep 2011 Location: balhannah south australia Posts: 4	67 panel G'day guys, I've got a 67 Panel Truck that I use for my work truck. The RHS barn door on the back has only got a latch on the top, the bottom one has been missing since I have owned it. It looks like it is probably the same thing as the top one, just with a different operating rod. I can make the rod, but would like to buy the mechanism. I expect the Suburban is the same and the same design is probably used on lots of other years trucks as well. i will post a picture of the truck when I figure out how.

09-06-2011, 09:27 PM	#2
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: 67 panel Panels in Australia-I love it Welcome from Northern Utah. I think, due to the Panels being work trucks, most people get tired of not being able to slide stuff in and out without having to lift it up over that latch, since it sticks up just a little bit. Mine's gone too, and I think the PO (previous owner) got tired of it when he had a cutting torch in his hand. Check out the sub-forum http://67-72chevytrucks.com/vboard/f...splay.php?f=38 There's a thread there with hundreds of pictures of Panels __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

09-07-2011, 01:23 AM	#3
deadeye02 Registered User Join Date: Sep 2011 Location: balhannah south australia Posts: 4	Re: 67 panel Yeah, this truck has had a hard life too. If I had known how rusty it was when i first saw it I would have left it there. Anyway, the bit I'm talking about is the little mechanism in the door itself, the bit on the floor (the striker?) is still there with nothing to hook onto it. Thanks for the link, it's interesting to see what others do.

09-07-2011, 02:18 AM	#4
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 67 panel theres a 68 panel at the local junkyard over here __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

09-07-2011, 02:25 AM	#5
deadeye02 Registered User Join Date: Sep 2011 Location: balhannah south australia Posts: 4	Re: 67 panel Thanks for that. Can you give me a name, phone number, email address or something and I'll try to find out if they can help me.

09-07-2011, 02:27 AM	#6
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: 67 panel pick n pull. in fresno, california. if u want i can probably head over and take a pix or two and possible remove it for u. __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

09-07-2011, 03:00 AM	#7
deadeye02 Registered User Join Date: Sep 2011 Location: balhannah south australia Posts: 4	Re: 67 panel Hey Thank You. That would be great, but I don't want you to make a special trip. If you do go, the bit I'm looking for is the little catch mechanism that sort of works like "rolling fingers" and is released by the door handle. I can take a picture of the top one if you think it would help.

09-07-2011, 07:15 AM	#8
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,257	Re: 67 panel I am not in this in any way, but this is what this forum is about . People helping people, complete strangers with only a truck in common. Renews my love for poeple this morning and may change my day.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.