What Did You Do With Your Truck Today ? - Page 102 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Nordic · 07-06-2013, 08:07 PM

Had to replace a leaking power steering pump.

Coupeguy2001 · 07-06-2013, 08:34 PM

workin on getting the radiator spaced back for A/C. I bought the biggest condenser I could find for the front, and it's thicker than I thought. Gotta clearance problem with the steering box if I move the radiator too far back as well.

Yewhi · 07-07-2013, 11:38 AM

New Bed Rails....

dubie · 07-07-2013, 12:07 PM

I installed a new bake switch, altered my throttle linkage to work better, installed the hood hinges and springs,and removed and replaced the u joints on my drive shaft before hanging it and giving it 2 healthy coats of satin black paint.
Posted via Mobile Device

**Dan in Pasadena** · 07-07-2013, 12:16 PM

Quote:

Originally Posted by Yewhi

New Bed Rails....

Man, she's beooootiful!
Posted via Mobile Device

Yewhi · 07-07-2013, 01:46 PM

Quote:

Originally Posted by Dan in Pasadena

Man, she's beooootiful!
Posted via Mobile Device

Thanks!

Daze57 · 07-07-2013, 03:06 PM

x2 ^

spinned · 07-08-2013, 01:10 AM

I like the bed rails...

mechanixman · 07-08-2013, 01:21 AM

This and that
Swap meet and pulled the motor

Yewhi · 07-08-2013, 09:20 AM

Quote:

Originally Posted by spinned

I like the bed rails...

I would hope so. Especially since they were intentionally made to look like yours using dimensions you gave me. You had better like them!

Thanks again!
Posted via Mobile Device

mknittle · 07-08-2013, 09:25 AM

Quote:

Originally Posted by mechanixman

This and that
Swap meet and pulled the motor

I think you will be happy with the small block. Easier to get parts and work on.

spinned · 07-08-2013, 11:23 AM

Quote:

I would hope so. Especially since they were intentionally made to look like yours using dimensions you gave me. You had better like them!

Thanks again!

They look really good on your AD!

mechanixman · 07-08-2013, 02:40 PM

Quote:

Originally Posted by mknittle

I think you will be happy with the small block. Easier to get parts and work on.

Not to mention 2 MORE cylinders!!

crossfire84 · 07-08-2013, 07:03 PM

ordered new bed wood for the AD today and went to the bone yard and scored a complete serpentine set-up ac compressor, power steering pump and all bolts for $50.

SuperCtruck · 07-08-2013, 08:51 PM

Cleaned Rat Poo out the Cab, popped off my hub caps while it sits in storage because I'm waiting on title before I start the build!

Posted via Mobile Device

**Dan in Pasadena** · 07-08-2013, 09:20 PM

Very cool. Being a Task Force guy, what year is it? What are your plans, c'mon give! lol.

No fair teasing us.

AZ59apacheguy · 07-08-2013, 10:43 PM

Not today, but the other weekend. I got the 283 in my '59 started and cam broken in. Now just trying to dial everything in and get some miles on her.

video

Yewhi · 07-08-2013, 11:18 PM

Quote:

Originally Posted by SuperCtruck

Cleaned Rat Poo out the Cab, popped off my hub caps while it sits in storage because I'm waiting on title before I start the build!

Posted via Mobile Device

Love the look of this, although I'll admit to looking at for pictures of that part of the front range. I grew up in Littleton and lived in CR for a few years before being exiled to San Diego a decade ago. Miss it greatly. Keep the pictures coming!
Posted via Mobile Device

SuperCtruck · 07-08-2013, 11:26 PM

Quote:

Originally Posted by Dan in Pasadena

Very cool. Being a Task Force guy, what year is it? What are your plans, c'mon give! lol.

No fair teasing us.

It's a 1949 Chevrolet 3100 5 window, 4" drop front & back, reupholster seat, 3" Whitewall tires, Leave sheet metal alone... Cruiser!
Posted via Mobile Device

SuperCtruck · 07-08-2013, 11:31 PM

Quote:

Originally Posted by Yewhi

Love the look of this, although I'll admit to looking at for pictures of that part of the front range. I grew up in Littleton and lived in CR for a few years before being exiled to San Diego a decade ago. Miss it greatly. Keep the pictures coming!
Posted via Mobile Device

This picture was in Lark spur just west of castle rock, yes I love it up here to man! Maybe one of these years you'll move back and you can join us on Friday cruise nights?!! Take care, Thanks
Posted via Mobile Device

crossfire84 · 07-10-2013, 07:08 PM

new bed wood came today.

crossfire84 · 07-10-2013, 08:13 PM

Quote:

Originally Posted by crossfire84

new bed wood came today.

Just dropped it in to see what she looks like.

Now who can tell me the best way to seal this, its red oak and will see a lot of miles when done.

focusedontheprize · 07-10-2013, 09:30 PM

Quote:

Originally Posted by AZ59apacheguy

Not today, but the other weekend. I got the 283 in my '59 started and cam broken in. Now just trying to dial everything in and get some miles on her.

video

She does sound great. You did an awesome job on that motor. I love that tachometer...haha. Currently looking for something for mine.
Posted via Mobile Device

**Dan in Pasadena** · 07-10-2013, 09:55 PM

The usual oak bed wood finish is a polyurethane on all SIX sides. Buy the most UV resistant marine type you can find, then still keep it out of the sun. I planned to go to a marine supply place. BUT I've also read online that for decks THE best stuff is called Pentofin. Not positive on that spelling. It's an oil finish of some type. I may consider that in leiu of a hard gloss finish.

PS: Your boards are not each one continuous piece of wood? They've multi piece? Who did you buy that through?
Posted via Mobile Device

crossfire84 · 07-10-2013, 10:06 PM

Quote:

Originally Posted by Dan in Pasadena

The usual oak bed wood finish is a polyurethane on all SIX sides. Buy the most UV resistant marine type you can find, then still keep it out of the sun. I planned to go to a marine supply place. BUT I've also read online that for decks THE best stuff is called Pentofin. Not positive on that spelling. It's an oil finish of some type. I may consider that in leiu of a hard gloss finish.

PS: Your boards are not each one continuous piece of wood? They've multi piece? Who did you buy that through?
Posted via Mobile Device

www.classictruckbeds.net
there multi pcs milled and glued together, something different.

07-06-2013, 08:07 PM	#2526
Nordic Registered User Join Date: Jun 2011 Location: Unionville CT Posts: 168	Re: What Did You Do With Your Truck Today ? Had to replace a leaking power steering pump.

07-06-2013, 08:34 PM	#2527
Coupeguy2001 Registered User Join Date: Aug 2011 Location: phoenix az Posts: 723	Re: What Did You Do With Your Truck Today ? workin on getting the radiator spaced back for A/C. I bought the biggest condenser I could find for the front, and it's thicker than I thought. Gotta clearance problem with the steering box if I move the radiator too far back as well.

07-07-2013, 11:38 AM	#2528
Yewhi Registered User Join Date: Oct 2012 Location: San Diego, CA Posts: 117	Re: What Did You Do With Your Truck Today ? New Bed Rails....

07-07-2013, 12:07 PM	#2529
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,855	Re: What Did You Do With Your Truck Today ? I installed a new bake switch, altered my throttle linkage to work better, installed the hood hinges and springs,and removed and replaced the u joints on my drive shaft before hanging it and giving it 2 healthy coats of satin black paint. Posted via Mobile Device __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

07-07-2013, 03:06 PM	#2532
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? x2 ^

07-08-2013, 01:10 AM	#2533
spinned Registered User Join Date: Oct 2012 Location: Beaverton Posts: 102	Re: What Did You Do With Your Truck Today ? I like the bed rails...

07-08-2013, 01:21 AM	#2534
mechanixman Registered User Join Date: Sep 2012 Location: Mt. Prospect, ILL Posts: 820	Re: What Did You Do With Your Truck Today ? This and that Swap meet and pulled the motor Attached Images __________________ -Nick Projects: 1952 Chevy 1 ton = The Build page

07-08-2013, 07:03 PM	#2539
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: What Did You Do With Your Truck Today ? ordered new bed wood for the AD today and went to the bone yard and scored a complete serpentine set-up ac compressor, power steering pump and all bolts for $50. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-08-2013, 08:51 PM	#2540
SuperCtruck Registered User Join Date: Jan 2008 Location: Castle rock colorado Posts: 183	Re: What Did You Do With Your Truck Today ? Cleaned Rat Poo out the Cab, popped off my hub caps while it sits in storage because I'm waiting on title before I start the build! Posted via Mobile Device Attached Images

07-08-2013, 09:20 PM	#2541
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,333	Re: What Did You Do With Your Truck Today ? Very cool. Being a Task Force guy, what year is it? What are your plans, c'mon give! lol. No fair teasing us.

07-08-2013, 10:43 PM	#2542
AZ59apacheguy Registered User Join Date: Sep 2011 Location: South West Posts: 431	Re: What Did You Do With Your Truck Today ? Not today, but the other weekend. I got the 283 in my '59 started and cam broken in. Now just trying to dial everything in and get some miles on her. video

07-10-2013, 07:08 PM	#2546
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,747	Re: What Did You Do With Your Truck Today ? new bed wood came today. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-10-2013, 09:55 PM	#2549
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,333	Re: What Did You Do With Your Truck Today ? The usual oak bed wood finish is a polyurethane on all SIX sides. Buy the most UV resistant marine type you can find, then still keep it out of the sun. I planned to go to a marine supply place. BUT I've also read online that for decks THE best stuff is called Pentofin. Not positive on that spelling. It's an oil finish of some type. I may consider that in leiu of a hard gloss finish. PS: Your boards are not each one continuous piece of wood? They've multi piece? Who did you buy that through? Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.