The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-15-2017, 09:06 PM   #1
Gargoyle
Registered User
 
Gargoyle's Avatar
 
Join Date: Nov 2013
Location: Blacksburg, VA
Posts: 60
SM-420/Pontiac engine

Will the SM-420 tranny bolt up to a Pontiac 389 or 400 block? This would be in a '65 GMC.
__________________
1962 C30 flatbed dually, 283\4 speed, 5.14's
Gargoyle is offline   Reply With Quote
Old 03-16-2017, 01:11 AM   #2
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 19,412
Re: SM-420/Pontiac engine

It should bolt right up to a Pontiac bellhousing as long as the center bore is 4-11/16". But then you have the issue of having to support the rear of the trans since you will no longer have a crossmember mounted bellhousing. The SM420 does not have provisions for a mount.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 03-16-2017, 02:17 PM   #3
61K10
Registered User
 
61K10's Avatar
 
Join Date: Feb 2012
Location: pleasant valley--placerville ca
Posts: 2,475
Re: SM-420/Pontiac engine

Might make one of these work. And use it with the stock bell. Don't know if you could make it work with a manual though? Find a sm465 that has a mount?
Attached Images
 
__________________
1961 chevy K10

my build is------------61K10 build
61K10 is offline   Reply With Quote
Old 03-16-2017, 08:42 PM   #4
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,092
Re: SM-420/Pontiac engine

The Olds & Poncho, bolt the starter to the dr side of the block . Buick must be on the pass side , as the Chev ....as all the BOP stick bells that I have seen , had provisions for a starter on either side? The adapter wont work for this app, but would work on an auto trans swap. You could use the BOP bell, & swap to a car type trans, that mounts @ the rear cross member under the trans....or possibly use a scatter sheild, & weld the mounts on the bottom to mount to your bell cross member. longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com