The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-19-2017, 11:33 AM   #1
timberjim36
Registered User
 
timberjim36's Avatar
 
Join Date: Jun 2011
Location: cape cod ma
Posts: 160
power window hook up

I just picked up a set of power doors for my 80 V30 and im trying to figure out how to get the wiring hooked up at the fuse box anybody have any pics or guidance
__________________
1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver)
92 harley electra glide ultra classic
timberjim36 is offline   Reply With Quote
Old 03-19-2017, 11:34 AM   #2
gmachinz
Senior Member
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 3,509
Re: power window hook up

What year are your doors?
__________________
Specializing in building electrical harnesses and cooling systems

HARNESSWORX

"An army may march great distances without distress, if it marches through country where the enemy is not."

-Sun Tzu: The Art of War
gmachinz is offline   Reply With Quote
Old 03-19-2017, 12:07 PM   #3
timberjim36
Registered User
 
timberjim36's Avatar
 
Join Date: Jun 2011
Location: cape cod ma
Posts: 160
Re: power window hook up

I belive theyre 85
__________________
1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver)
92 harley electra glide ultra classic
timberjim36 is offline   Reply With Quote
Old 03-19-2017, 12:37 PM   #4
gmachinz
Senior Member
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 3,509
Re: power window hook up

Well...77-80 is one style and 81-up is another. You need a new style harness since those are newer doors. The fuse panel only requires an IGN source and Battery source. Window circuit will also need a chassis ground underdash. So, if you want to save a little $$$, you need to pull a complete harness from an 81-up Suburban or crewcab-then install it all as-is into your truck. If you don't have power in it now, you need to drill for cab-door grommets too-both inside and outside. I can supply you with a complete hybridbharness just for your application for a clean stock appearance but otherwise you'll need to source it all from a newer truck....trust me those are your two options.
__________________
Specializing in building electrical harnesses and cooling systems

HARNESSWORX

"An army may march great distances without distress, if it marches through country where the enemy is not."

-Sun Tzu: The Art of War
gmachinz is offline   Reply With Quote
Old 03-19-2017, 12:49 PM   #5
timberjim36
Registered User
 
timberjim36's Avatar
 
Join Date: Jun 2011
Location: cape cod ma
Posts: 160
Re: power window hook up

Ok thanks thats what i had kinda figured heading to the bone yard tomorrow so ill look aeound
__________________
1980 crewcab dually soon to have a gen VI 454 rectangular port heads holley strip dominator crusader marine stand alone tbi setup with a TCI tcu controlled 4L80 (daily driver)
92 harley electra glide ultra classic
timberjim36 is offline   Reply With Quote
Old 03-19-2017, 01:00 PM   #6
gmachinz
Senior Member
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 3,509
Re: power window hook up

If you are going to a junkyard, hit up the older GM stuff w/power windows and look for the glass fuse block style blue and red connectors-you'll need those for IGN power and Battery power.
__________________
Specializing in building electrical harnesses and cooling systems

HARNESSWORX

"An army may march great distances without distress, if it marches through country where the enemy is not."

-Sun Tzu: The Art of War
gmachinz is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com