The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Closed Thread
 
Thread Tools Display Modes
Old 01-17-2011, 08:10 PM   #1
lolife99
Registered User
 
lolife99's Avatar
 
Join Date: Nov 2002
Location: Mid-MO
Posts: 21,871
"Drum to Disc" conversions 60-70

60-62 truck with:


63-70 Crossmember Installed
********************************
60-62 Truck with:
71-72 Crossmember Installed
********************************
60-62 Truck with:
73-87 Crossmember Installed
********************************
60-62 Truck with:
71-72 Crossmember Not Yet Installed:
********************************
60-62 Truck with:
73-87 Crossmember Not Yet Installed:
********************************


63-66 truck with:

63-66 Crossmember Installed
********************************
63-66 truck with:
71-72 Crossmember Installed
********************************
63-66 truck with:
73-87 Crossmember Installed
********************************
63-66 truck with:
71-72 Crossmember Not Yet Installed:
********************************
63-66 truck with:
73-87 Crossmember Not Yet Installed:
********************************


67-70 truck with:

67-70 Crossmember Installed
********************************
67-70 truck with:
71-72 Crossmember Installed
********************************
67-70 truck with:
73-87 Crossmember Installed
********************************
67-70 truck with:
71-72 Crossmember Not Yet Installed:
********************************
67-70 truck with:
73-87 Crossmember Not Yet Installed:


*********************************************************************************
60-72 truck with

"Unknown" Crossmember Swap?
* This is where it's hard to determine the correct parts needed.

Here's the break down by year:

Disc Brake Spindle:
*60-70 (Aftermarket Conversion Spindles)
*71-72 (oem or drop)
*73-87 (oem or drop)

C10
Grouped by Differences:
*60-62
*63-70
*71-72
*73-87 (HD 1.25" wide rotors)
*81-87 (LD 1.00" wide rotors)
**Some 81-87 trucks also had the HD rotors**
** All Aftermarket 6-lug "Conversion Rotors Are the HD 1.25" wide version**
C20
*71-87

Rotors:
*71-72 (1.25" wide)
*73-87 (HD 1.25" wide rotors)
*81-87 (LD 1.00" wide rotors)
**Some 81-87 trucks also had the HD rotors**
** All Aftermarket 6-lug "Conversion Rotors Are the HD 1.25" wide version**

Calipers:
*71-72 (1.25" wide)
*73-87 (HD 1.25" wide rotors)
*81-87 (LD 1.00" wide rotors)
**Some 81-87 trucks also had the HD rotors**
** All Aftermarket 6-lug "Conversion Rotors Are the HD 1.25" wide version**

Upper Ball Joint:
Grouped by Differences:
C10
*60-62
*63-70
*71-72
*73-87
C20
*71-87

Lower Ball Joint:
Grouped by Differences:
C10
*60-62
*63-70
*71-87
C20
*71-87

Control Arm Upper Cross Shafts:
Grouped by Differences:
C10
*60-62
*63-72
*73-87
C20
*63-87

Control Arm Lower Cross Shafts:
Grouped by Differences:
C10
*60-62
*63-72
*73-87
C20
*67-86


Inner Tie Rods:
Grouped by Differences:
C10
*60-62
*63-64
*65-70
*71-72
*73-87
C20
*60-64 (drivers side)
*60-64 (pass. side)
*65-70
*71-87

Outer Tie Rods:
Grouped by Differences:
C10
*60-64
*65-70
*71-72
*73-87
C20
*60-64
*65-70
*71-87

Tie Rod Adjusting Sleeves
Grouped by Differences:
C10 and C20
*60-64
*65-70 (5/8" thread)
*71-87 (11/16" thread)

Centerlink:
Grouped by Differences:
*60-62
*63-64
*65-70
*71-72
*73-87

Pitman Arm:
Grouped by differences:
C10
*60-66 Manual
*60-66 P/S
*67-72 Manual
*67-87 P/S (Specify Year When Ordering)
C20
manual:
*60-66
*67-68
*69-70
*71-87
Power Steering:
*69-70
*71-87

Idler Arm
Grouped by differences:
C10
*60-62
*63-66
*67-82
*83-87
C20
*60-66
*67-82
*83-87

Steering Box:
Manual
*60-62
*63-66
*67-82
*83-87
Power Steering
__________________
Keith

Last edited by lolife99; 01-19-2013 at 10:40 AM.
lolife99 is online now  
Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com