The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Paint & Bodywork

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-15-2017, 12:03 AM   #1
bigsky
Registered User
 
bigsky's Avatar
 
Join Date: Feb 2016
Location: North West, MT
Posts: 52
Need door seal/alignment advice

Finally getting 72 K10 put back together, after many hours of trial & error door alignment. I got the gaps all fairly uniform. Problem is Pic #1 the rear of the passenger door is out about 3/16". This is with door seal installed. Aligns perfect with door seal removed. What is the best solution for this problem. I did replace the door sill/rocker, could this be holding the seal out? I have adjusted the striker catch plate in as far as I could, without slotting the holes.
Attached Images
    
bigsky is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com