The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension


Thread Tools Display Modes
Old 03-19-2017, 08:08 PM   #1
Registered User
Join Date: Jan 2014
Location: Vancouver Island B.C.
Posts: 140
proportioning valve question

Hello all,

So I'm nearing the end of rebuilding a dana 44 front and 60 rear for my 1972 Jimmy to loose the 3.07:1 gear ratio I hate. The HD44 is out of a 1975 K20 and the 60 is out of a 1969 F250 and has a sweet dana power lock in it. I'm keeping the rear HD drums on the 60 for economy sake and ease of parking brake. I have new stock rotors and calipers on the front 44 out of the K20. I also have a new one ton booster and master that seems to be a common upgrade here. I know the lines are backwards on the 1 ton set up but my question is can I use the stock proportioning valve as I'm staying with a disc / drum combination?

Thanks in advance
audaciousduo is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 07:28 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013