question about power brake booster

[hotrodchevy1999]

my question is what would it take to swap my non power brake 71 c10 to power brakes i have a 98 c2500 chevy parts truck that i would like to use power booster and brake reservoir off of what would it take to do this

[hotrodchevy1999]

ttt

[hotrodchevy1999]

any input

[502ms]

You need to run the booster hose to the back of the intake. Give me a second. I will post the part number.
Posted via Mobile Device

[502ms]

Yes it is a push to connect fitting. I had the same thing on my LQ4 swap. You will have to push the blue ring inward and pull the plug out, no tools required. If you want to use it, like I did for the brake booster, you can buy the actual GM Brake booster Nipple from the stealership. The part number is GM 12559760. Hope this helps

http://www.gmpartsgiant.com/parts/gm...-12559760.html
Posted via Mobile Device

[502ms]

You can see me holding the nipple in this video:
http://m.youtube.com/#/watch?feature=plcp&v=MIEkT-fKsOo
Posted via Mobile Device

[wraprail]

Originally Posted by 502ms

You need to run the booster hose to the back of the intake. Give me a second. I will post the part number.
Posted via Mobile Device

Originally Posted by 502ms

http://www.gmpartsgiant.com/parts/gm...-12559760.html
Posted via Mobile Device

Originally Posted by 502ms

You can see me holding the nipple in this video:
http://m.youtube.com/#/watch?feature=plcp&v=MIEkT-fKsOo
Posted via Mobile Device

I'm thinking there is a little more to it than just hooking the vacuum line to the intake.

To the OP,
I am guessing you want to use the late model master as well?
If so you will need to adapt the hard line fittings at the master?
Do you currenty have disc brakes?

[502ms]

Well, I assumed he had swapped discs in, lines, booster, etc.
Posted via Mobile Device

[hotrodchevy1999]

the 71 truck came 5 lug disc brake factory but no power booster i plan on putting a 98 vortec motor in it out of the 98 c2500 but i also wanted to use the master and power brake booster off of the 98 as well and wanted to know what it would take to make it work on the fire wall to hooking it in to the brake line and i guess i should also asked dose a factory 71 with power brakes have bigger size brake lines then a non power brake truck