The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2017, 05:18 PM   #1
Harleymike
Registered User
 
Join Date: Aug 2017
Location: Courtright, Ontario
Posts: 6
64 GMC stepside

Hey guys. New too all this.
I just picked up a 64 from Alberta. No salt there.
Its in good shape.
I have searched this forum, but Im trying to figure something out.
Mine has the I6 with 4 speed.
These 4 speed trannies, I have heard good and bad.
Pretty much first gear is useless but very durable trannies.
But, how much HP can they take.
I plan on putting a V8 in there and would be around 400 HP.
Is this tranny capable of handling that, or should I look at a different tranny.

Thanks for any help
Mike
Harleymike is offline   Reply With Quote
Old 08-12-2017, 06:06 PM   #2
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 7,013
Re: 64 GMC stepside

I would go with a 5 speed mated to the 400hp v8, for pleasure of driving and highway use.
__________________
Clyde65

http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 08-12-2017, 11:49 PM   #3
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 19,859
Re: 64 GMC stepside

With the SM420, SM435 and SM465 four speed transmissions, 1st gear is not intended to be used in everyday driving. You start out in 2nd gear, so you basically have a 3 speed trans. First gear is used when low speed crawling or pulling power is needed. I see no reason a SM420 won't hold up behind a 400hp V8

For a frequent driver I have to agree that a 5 speed manual or a 4 speed auto OD trans makes more sense.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-13-2017, 01:49 PM   #4
Brad54
Senior Member
 
Brad54's Avatar
 
Join Date: Aug 2006
Location: Jefferson, Georgia
Posts: 1,053
Re: 64 GMC stepside

Captain is right about the durability of the trans.
I went through all this decisioneering for my Suburban. Like your GMC, I had a Dana 44 in mine, which gives a lot more options.
I made a chart that showed the gear splits with the Granny 4spd (yours), and a 4spd OD manual trans (since I had one and it was a bolt-in).
I figured effective ratios with the trans gears and different rear end gears, with an eye to final drive ratio at highway speeds.

With the Granny 4-speed, you could get 2.90 or 3.08 or 3.23 gears in the rear and still leave the line, with the 4spd OD I have (.72:1 final drive), I went with 3.42 gears.

I like jack-rabbit starting and 3.42 gears are still enough to pull a light trailer, so that was why I went with my choice.

5-speeds are a great choice too, but I didn't have one, and I don't know what's required to put them in our trucks as far as bellhousings and new cross members. The 4spd OD was a bolt-in for my '62 torsion-bar/X-frame truck with the bellhousing engine mounts.

-Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck!
'62 K-10 long-step project
Nostalgia Altered drag car with 2x4 FE Ford.
'57 Chevy 2dr 150 wagon gasser
'76 Power Wagon daily driver
'56 Chevy 2dr basket case
'54 Buick Special
'73 Duster on a rotisserie

Hi, my name is Brad, and I have a problem!
Brad54 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com