WA Tilt Column, column shift, serviced and painted - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 12-08-2018, 04:47 PM

This one is nice and the real deal. Removed from a 1972 C20 Cheyenne Super as shown on the SPID of the ochre glovebox door I listed for sale yesterday.
http://67-72chevytrucks.com/vboard/s...d.php?t=776839
It has been completely disassembled, bead blasted, cleaned, painted, lubed and set to factory specs.
$435 shipped.

*randy500* · 12-08-2018, 04:49 PM

This was worked on with the proper tools.

*randy500* · 12-08-2018, 04:59 PM

You identify a true truck tilt by the following attributes.
1. Green indicator lamp filter.
2. Steering wheel shaft lacks snap ring groove.
3. Middle part of column doesnt have extra holes cut in it for van high placement neutral safety switch.
4. Output spline has short stickout.
5. Shift indicator lens as shown in pictures is truck style.
6. Hazard knob as shown in pictures is correct truck style.
7. Super long grey wire for indicator bulb with proper black packard female connector.
8. Short wire cover at bottom of column

*randy500* · 12-08-2018, 05:00 PM

Wiring cover

*randy500* · 12-08-2018, 05:12 PM

I have an overdrive indicator lens i could exchange with the current one at no cost and a new shift lever for an additional $30, that i just picked up from Classic Heartbeat

**Oddfire** · 12-09-2018, 11:20 AM

Super nice piece!

*randy500* · 12-09-2018, 11:21 AM

Quote:

Originally Posted by Oddfire

Super nice piece!

Thank you!

**dtkarst** · 12-09-2018, 12:47 PM

Trying to take myself into actually needing this thing lol

*randy500* · 12-09-2018, 01:07 PM

Quote:

Originally Posted by dtkarst

Trying to take myself into actually needing this thing lol

I’m glad I won’t be in the room when you get the email saying this...

”I’ll take it”

**dtkarst** · 12-09-2018, 01:22 PM

Pm sent

**Super Dude** · 12-09-2018, 01:35 PM

I'll take it...but not sure if you have a deal going with another member

**dtkarst** · 12-09-2018, 02:06 PM

I pm’d him about it, but I didn’t put it in my first post but I’ll take it. Hope I didn’t make a mess here

*randy500* · 12-09-2018, 02:15 PM

Quote:

Originally Posted by dtkarst

I pm’d him about it, but I didn’t put it in my first post but I’ll take it. Hope I didn’t make a mess here

I think per the rules it still my option as to who I sell it to, I will take it is not a firm rule. Selling to you as you sent me a message about it an your a long time member and buyer here.

Use the link below to my PayPal, put a note in there of what your paying for and I will ship it tomorrow.

*randy500* · 12-09-2018, 02:18 PM

Quote:

Originally Posted by Super Dude

I'll take it...but not sure if you have a deal going with another member

Sold to drkarst, pending payment.
I will have another column ready probably Wednesday or so of this week if your still interested, I will put you first in line on that one.

**Super Dude** · 12-09-2018, 10:03 PM

Hi. If its a real truck column and as nice as that one is...I'll take it. I'll try to keep an eye out for your ad. Thanks

*randy500* · 12-09-2018, 10:10 PM

Quote:

Originally Posted by Super Dude

Hi. If its a real truck column and as nice as that one is...I'll take it. I'll try to keep an eye out for your ad. Thanks

That one is from a motor home, those have the short stickout shaft, the only real difference when I finish it will be that the shifter has a step in it. It will be a no modification direct bolt in and will be just as nice as this one, Price will be $375 shipped I think.
If you want to be first inline I will give you that and send you a message when I list it, 24 hours to decide or respond.

**Super Dude** · 12-09-2018, 10:15 PM

Sounds good. I'll take a look at it when you post it.

flashed · 12-09-2018, 10:44 PM

Next in line please .

Hidesertchevy · 12-09-2018, 10:58 PM

I have bought a column from Randy and his work is top notch!

*randy500* · 12-09-2018, 10:59 PM

Quote:

Originally Posted by flashed

Next in line please .

I will put you in line when I list it.

*randy500* · 12-09-2018, 11:00 PM

Quote:

Originally Posted by Hidesertchevy

I have bought a column from Randy and his work is top notch!

Thanks for the great compliment. I need that, the other column builder has a very strong folllowing....almost cult-like.

flashed · 12-09-2018, 11:24 PM

I have one of his as well .

*randy500* · 12-09-2018, 11:34 PM

Quote:

Originally Posted by flashed

I have one of his as well .

Thanks, there are a few of them out there...
I rebuild non tilt columns too when I have them and they need it to be sellable.

205harleyman · 12-16-2018, 12:04 AM

Do you have truck tilt column available?

*randy500* · 12-16-2018, 12:09 AM

Quote:

Originally Posted by 205harleyman

Do you have truck tilt column available?

I should have another column done by middle of next week. I am waiting on a new set of column grommets, its all cleaned, bead blasted and ready to assemble, its a real clean piece.
Its from a motorhome and I have converted it to truck and it will be a direct bolt in. The only difference is the shifter arm is a little different shape. I will point it out when I post pictures of it.

12-08-2018, 04:47 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Tilt Column, column shift, serviced and painted This one is nice and the real deal. Removed from a 1972 C20 Cheyenne Super as shown on the SPID of the ochre glovebox door I listed for sale yesterday. http://67-72chevytrucks.com/vboard/s...d.php?t=776839 It has been completely disassembled, bead blasted, cleaned, painted, lubed and set to factory specs. $435 shipped. Attached Images Last edited by randy500; 12-08-2018 at 05:03 PM.

12-08-2018, 04:49 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, column shift, serviced and painted This was worked on with the proper tools. Attached Images

12-08-2018, 04:59 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, column shift, serviced and painted You identify a true truck tilt by the following attributes. 1. Green indicator lamp filter. 2. Steering wheel shaft lacks snap ring groove. 3. Middle part of column doesnt have extra holes cut in it for van high placement neutral safety switch. 4. Output spline has short stickout. 5. Shift indicator lens as shown in pictures is truck style. 6. Hazard knob as shown in pictures is correct truck style. 7. Super long grey wire for indicator bulb with proper black packard female connector. 8. Short wire cover at bottom of column Attached Images

12-08-2018, 05:00 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, column shift, serviced and painted Wiring cover Attached Images

12-08-2018, 05:12 PM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt Column, column shift, serviced and painted I have an overdrive indicator lens i could exchange with the current one at no cost and a new shift lever for an additional $30, that i just picked up from Classic Heartbeat Attached Images

12-09-2018, 11:20 AM	#6
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Tilt Column, column shift, serviced and painted Super nice piece!

12-09-2018, 12:47 PM	#8
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Tilt Column, column shift, serviced and painted Trying to take myself into actually needing this thing lol

12-09-2018, 01:22 PM	#10
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Tilt Column, column shift, serviced and painted Pm sent

12-09-2018, 01:35 PM	#11
Super Dude Active Member Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: Tilt Column, column shift, serviced and painted I'll take it...but not sure if you have a deal going with another member

12-09-2018, 02:06 PM	#12
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Tilt Column, column shift, serviced and painted I pm’d him about it, but I didn’t put it in my first post but I’ll take it. Hope I didn’t make a mess here

12-09-2018, 10:03 PM	#15
Super Dude Active Member Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: Tilt Column, column shift, serviced and painted Hi. If its a real truck column and as nice as that one is...I'll take it. I'll try to keep an eye out for your ad. Thanks

12-09-2018, 10:15 PM	#17
Super Dude Active Member Join Date: Sep 2018 Location: Springfield Oregon Posts: 112	Re: Tilt Column, column shift, serviced and painted Sounds good. I'll take a look at it when you post it.

12-09-2018, 10:44 PM	#18
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Tilt Column, column shift, serviced and painted Next in line please .

12-09-2018, 10:58 PM	#19
Hidesertchevy Registered User Join Date: Mar 2017 Location: yucca valley Posts: 239	Re: Tilt Column, column shift, serviced and painted I have bought a column from Randy and his work is top notch!

12-09-2018, 11:24 PM	#22
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Tilt Column, column shift, serviced and painted I have one of his as well .



Register or Log In To remove these advertisements.

12-16-2018, 12:04 AM	#24
205harleyman Registered User Join Date: May 2011 Location: birmingham, al Posts: 212	Re: Tilt Column, column shift, serviced and painted Do you have truck tilt column available? __________________ 205harleyman 1972 K5 Blazer 2002 5.3 ltr engine and transmission Vintage Air 1999 tan leather bucket seats and console w/1999 back seat 20inch Torque Thrust Wheels Corvette Madrid Red with Tan Top Hope to be driving soon!!!

Register or Log In To remove these advertisements.