Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-12-2017, 12:22 AM | #1 |
Registered User
Join Date: Dec 2013
Location: Calgary
Posts: 20
|
Driveshaft Loop install for 72 C10
Hi All. Just finished installing a driveshaft loop on my 72. I used 2 pieces of 1x2 steel channel to anchor the Lakewood driveshaft loop. I am running Tremec and it was located as per NHRA specs...no more than 6" from the centre of the front u-joint. It was mounted between the floor pan and the frame rails. I did need to notch the channel out to allow for clearance to eliminate any vibration coming through the frame.
|
Bookmarks |
|
|