Rusty 69 K5 Tub (Free) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Roostr84 · 04-28-2005, 08:48 PM

Anybody interested in a free tub (69 CST). It would be useful as a trail rig unless you are really ambitious. Doors have rust, windshield frame is rotted in corner. Has rust around wheel wells and bedsides are rotted on bottoms. But on the good side its free. Any interested parties? I can send pics if you are interested.

meathead95 · 04-28-2005, 09:15 PM

does it have rear interior panels if so ill take them

sb400 · 04-29-2005, 12:03 PM

How's the bed floor?

**6t727t2** · 04-29-2005, 07:03 PM

Could you email some pics to hchconst@comcast.net, I'm looking for some patch pieces. Thanks, Harry

Roostr84 · 04-30-2005, 07:08 AM

Meathead95,I have one good one the other one was water damged but the PO put speakers in them as well. Let me check to verify that I have them still but if you want they are yours.

sb400, The bed floor has rot at the tailgate about 3 inches wide by less than a foot in length going across from the corner on each side.

I have to transfer my pics from my computer at work so it may be a day or two before I can get them available.

meathead95 · 04-30-2005, 03:03 PM

cool you can send me pics to meathead95@hotmail.com
thanks
keith

Roostr84 · 05-03-2005, 01:40 PM

If you guys wanna let me know what particular pieces you are looking for(if you haven't already) I will send you the appropriate pics.

71Rat · 05-03-2005, 04:23 PM

can you send pics of the whole truck inside and out to me please? rodrun07@hotmail.com..... thank you

Rat

meathead95 · 05-04-2005, 09:00 AM

did yah find those interior panels?
thanks,
keith

**6t727t2** · 05-04-2005, 06:57 PM

Any pics you have would be good, need patches for several areas.

midyearvet@aol. · 05-04-2005, 09:28 PM

I am looking for the little wedge shaped brackets that bolt to underside of floor & sub frame rail that rear outer bucket seat bracket bolts to. Need 2
Thanks Rick
midyearvet@aol.com

Roostr84 · 06-07-2005, 08:40 PM

Sorry for the long wait since my last appearance, life gets in the way sometimes. In anycase I am attempting to attach some pics of the bad sections. Meathead, the interior panels were really no good. The one remaining had been cut to allow for a roll bar. I've decided I don't have time (obviously) to cut out pieces of this, I just want to get it out of the yard.

One is the right windshield corner, another is the 1 foot section by the tailgate (its nearly identical on both sides, one of the patch on the floor under the rollbar by the driver side door and the last is the rust in the back quarter and wheel well (it's the same on both sides)

chevy_fatman · 06-07-2005, 09:19 PM

That tub is in mint condition!!

if I only had the extra room!

meathead95 · 06-07-2005, 09:24 PM

how about those interior panels?

**6t727t2** · 06-07-2005, 10:30 PM

I could pick it up this week. PM or email me, hchconst@comcast.net Thanks, Harry

Roostr84 · 06-08-2005, 09:53 AM

Quote:

Originally Posted by meathead95

how about those interior panels?

Quote:

Meathead, the interior panels were really no good. The one remaining had been cut to allow for a roll bar.

6t727t2- PM sent.

I am glad somebody wants this, I really didn't want to junk it.

04-28-2005, 08:48 PM	#1
Roostr84 Registered User Join Date: Oct 2000 Location: Egg Harbor Twp., NJ, USA Posts: 156	Rusty 69 K5 Tub (Free) Anybody interested in a free tub (69 CST). It would be useful as a trail rig unless you are really ambitious. Doors have rust, windshield frame is rotted in corner. Has rust around wheel wells and bedsides are rotted on bottoms. But on the good side its free. Any interested parties? I can send pics if you are interested.

04-28-2005, 09:15 PM	#2
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	does it have rear interior panels if so ill take them __________________ 72 2wd blazer 72 swb 4x4

04-29-2005, 12:03 PM	#3
sb400 Registered User Join Date: Nov 2003 Location: Superior CO Posts: 32	How's the bed floor? __________________ '79 SWB 4x4 Scottsdale 350/4 speed '70 Nova 406/M20 4 speed '02 Subaru WRX wagon

04-30-2005, 03:03 PM	#6
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	cool you can send me pics to meathead95@hotmail.com thanks keith __________________ 72 2wd blazer 72 swb 4x4

05-03-2005, 01:40 PM	#7
Roostr84 Registered User Join Date: Oct 2000 Location: Egg Harbor Twp., NJ, USA Posts: 156	If you guys wanna let me know what particular pieces you are looking for(if you haven't already) I will send you the appropriate pics. Last edited by Roostr84; 05-03-2005 at 01:40 PM.

04-29-2005, 07:03 PM	#4
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,432	Could you email some pics to hchconst@comcast.net, I'm looking for some patch pieces. Thanks, Harry

04-30-2005, 07:08 AM	#5
Roostr84 Registered User Join Date: Oct 2000 Location: Egg Harbor Twp., NJ, USA Posts: 156	Meathead95,I have one good one the other one was water damged but the PO put speakers in them as well. Let me check to verify that I have them still but if you want they are yours. sb400, The bed floor has rot at the tailgate about 3 inches wide by less than a foot in length going across from the corner on each side. I have to transfer my pics from my computer at work so it may be a day or two before I can get them available.

05-03-2005, 04:23 PM	#8
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	can you send pics of the whole truck inside and out to me please? rodrun07@hotmail.com..... thank you Rat __________________ Modify everything, leave nothing alone!~

05-04-2005, 09:00 AM	#9
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	did yah find those interior panels? thanks, keith __________________ 72 2wd blazer 72 swb 4x4

05-04-2005, 06:57 PM	#10
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,432	tub pics Any pics you have would be good, need patches for several areas.

05-04-2005, 09:28 PM	#11
midyearvet@aol. Registered User Join Date: Jun 2003 Location: Napa, Ca. Posts: 103	Bucket seat attaching mounts I am looking for the little wedge shaped brackets that bolt to underside of floor & sub frame rail that rear outer bucket seat bracket bolts to. Need 2 Thanks Rick midyearvet@aol.com

06-07-2005, 08:40 PM	#12
Roostr84 Registered User Join Date: Oct 2000 Location: Egg Harbor Twp., NJ, USA Posts: 156	Sorry for the delay Sorry for the long wait since my last appearance, life gets in the way sometimes. In anycase I am attempting to attach some pics of the bad sections. Meathead, the interior panels were really no good. The one remaining had been cut to allow for a roll bar. I've decided I don't have time (obviously) to cut out pieces of this, I just want to get it out of the yard. One is the right windshield corner, another is the 1 foot section by the tailgate (its nearly identical on both sides, one of the patch on the floor under the rollbar by the driver side door and the last is the rust in the back quarter and wheel well (it's the same on both sides) Attached Images Last edited by Roostr84; 06-07-2005 at 08:43 PM.

06-07-2005, 09:19 PM	#13
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	That tub is in mint condition!! if I only had the extra room! __________________ Paul How do you make the invisible, visible?.........You take it away.

06-07-2005, 09:24 PM	#14
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	how about those interior panels? __________________ 72 2wd blazer 72 swb 4x4

06-07-2005, 10:30 PM	#15
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,432	Blazer tub I could pick it up this week. PM or email me, hchconst@comcast.net Thanks, Harry



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.