The 1947 - Present Chevrolet & GMC Truck Message Board Network

Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Truck Audio


Thread Tools Display Modes
Old 07-21-2017, 09:49 PM   #51
Senior Member
68c10airstream's Avatar
Join Date: Mar 2013
Location: Marquette michigan
Posts: 794
Re: '67-'72 Kick Panel speaker enclosures

I made my own and this is what i did; tractor supply had small metal buckets that have the bottom just a little bigger than the speaker hole needed. Cut the bottom out leaving say a 1/2" remaining to screw the speaker flange to. Now figure out the depth and angle you need, cut slits in the sides of the bucket up to the point of bending them out flat to be screwed to an mdf board that will be the final outer size. Then go to the auto parts store and get a gallon of body filler, evercoat has had a special for years @ $20.00 for a gallon. Now spread the filler around the sides as you build it up and mine were somewhat teardrop styled when done. Paint or cover as you wish!! Use screws to mount it to the side panel working through the speaker hole before you mount the speaker=screws hidden.

My reasoning for doing it this way was to get a deeper base response because the enclosure has some heft to it and i put a little fiberfill in the hole before i installed the speaker. 2 buckets, a gallon of filler and a can of paint, probably 40-50 bucks but looks and works good for my polk audio 6 1/2" speakers.
68c10airstream is offline   Reply With Quote
Old 10-07-2017, 10:54 AM   #52
Registered User
Jarwood's Avatar
Join Date: Oct 2011
Location: Hoschton, Georgia
Posts: 248
Re: '67-'72 Kick Panel speaker enclosures

I made my own also. Actually not to bad with resin, wood frame and filler to smooth it out.
Attached Images
Jarwood is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 10:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright 1997-2013