The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-22-2003, 01:19 PM   #1
GreenMystChevy
Registered User
 
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
wheel and tire size?

I know it has been asked but of course with the search feature down and me not bookmarking some threads here and there, I must ask again.

I am building up a '72 GMC 4x4 with an 8" suspension lift and a 2" body lift. It will be my daily driver (I know it will be a gas hog) but yet I will be taking her for some off road fun on the weekends.
I am looking at getting BFG Mud Terrain tires and not sure on the wheels yet, Maybe some MT's.

My question is, what wheel size and backspace do I need for my rims so that I can tuck as much without sticking out real far to attract the cops and what tire size should I run? I was thining 38's or 40's.

Thanks guys
__________________
Jeremy
'71 C-10
'72 GMC K2500
'72 Nova (Dad's)
'70 Chevelle SS
'55 Sedan Delivery

Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall
GreenMystChevy is offline   Reply With Quote
Old 07-23-2003, 06:09 AM   #2
JIMs70GMC
user # 2756
 
JIMs70GMC's Avatar
 
Join Date: Jun 2001
Location: Chesapeake, Virginia
Posts: 4,612
BFGs don't come that big. I think the biggest is 37". You could run 38x12.5/15 TSLs on an 8" wide rim w/ 4" backspacing. If you go to a 10" wide rim the tires will stick out past the fenders in the front. Check out the pics in the link in my sig.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.

1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm
JIMs70GMC is offline   Reply With Quote
Old 07-23-2003, 10:21 AM   #3
blazerboy72
Senior Member
 
Join Date: Mar 2002
Location: Temple, Ga
Posts: 854
you could easily use a 40". my 38.5's are on 10 inch wheels and they dont stick out to far maybe an inch or two. Good luck on the daily driver. i tried it for a little whil but decided i liked getting miles per gallons instead of gallons per mile.
blazerboy72 is offline   Reply With Quote
Old 07-23-2003, 11:32 AM   #4
GreenMystChevy
Registered User
 
Join Date: Jan 2002
Location: Woodinville, WA
Posts: 513
Thanks guys, that sucks about the BFG's, I really liked 'em.

I am now trying to decide what backspace (probably 4") and what height of tire to get being that I want the look of 40's yet the little bit less weight of 37's and 38's.

I'll probably just go 12.5" wide instead of the better looking 14.5 or so to save me some gas, power, and time (not having to deal with the police)
__________________
Jeremy
'71 C-10
'72 GMC K2500
'72 Nova (Dad's)
'70 Chevelle SS
'55 Sedan Delivery

Attempting to build up this here 4x4...make her real tall and purty...well, maybe just tall
GreenMystChevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com