Blazer rear ashtray needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblock73 · 05-22-2003, 10:39 PM

I need the drivers side ash tray assembly for the back seat of my 77 Blazer. I am not sure if left and right assemblies are the same (since i am missing one) and i am also not sure what yrs will fit. The assembly actually sits in the arm rest pad if that helps.

Thanks - Jeff

alf4444 · 05-23-2003, 09:13 AM

If you are talking about the ones that go in the side panels I have A set out of my 78, I'm not going to be using my side panels so I don't need it, its not very clean though.

bigblock73 · 05-23-2003, 09:18 AM

No, I need the one that actually sits in the armrest of the rear seat.

Thanks though!

...Jeff

bigblock73 · 05-27-2003, 08:57 PM

bumpity bump

anyone?

**crossy** · 05-28-2003, 12:34 AM

what did you do put a bronco seat in it ??

even the 86 Silverado K5 I have does not have ashtrays in the arm rests.

bigblock73 · 05-28-2003, 06:56 AM

Hll no Dave! The older Blazers had them in the arm rest...hopefully i can post a pic later today.

...Jeff

bigblock73 · 05-28-2003, 11:10 AM

you can barely see where the ashtray goes on the drivers side of the rear seat...and NO this is not a ford seat!

-Jeff

**crossy** · 05-28-2003, 01:19 PM

Oh, OK it's a Plymouth Trailduster seat .

only kidding

junkyardpartseeker · 05-29-2003, 05:49 PM

That seat looks similar to the 3rd seat I have in my 84 suburban. I know the ashtray you are looking for. I am going to the junkyard tomorrow for body parts and will look around for you one. What is the price range you are willing to spend for one minus shipping. So I will know a price range to stay in. Tommy Little Rock,AR

bigblock73 · 05-29-2003, 07:23 PM

Thanks Tommy, I really don't want to spend more than $5 or so plus shipping...if anyone tries to sell it for more than $5 they should be shot!

Thanks!

-Jeff

junkyardpartseeker · 05-30-2003, 12:54 AM

Jeff,
I will make sure I keep the price under the $5 limit. I know that shipping via priority is $3.85 not sure what parcel post is. If I find one on friday or saturday, I will email you and let you know. Don't get your hopes up, just keep your fingers crossed. I have a few junkyards here with suburban and blazers in them.
Tommy Davis
Little Rock,AR
especiallyforyou@sbcglobal.net

bigblock73 · 06-03-2003, 12:44 AM

Tommy, did you have any luck with finding an ashtray?

Anyone else??

...Jeff

apstguy · 06-03-2003, 01:34 AM

I thought I saw one last time I was at the junk yard. Want me to go look? Everytime I say I see something, I go back & everything is striped

Let me know by PM

junkyardpartseeker · 06-03-2003, 02:10 AM

Haven't found one yet. Still have a few of the junkyards to check out. If I can't find one here, I am sure someone can. I do believe the ashtray from the armrest of a 3rd seat in a suburban will fit. Like I said, your seat is shaped just like my 3rd seat. I will keep looking and let you know if I find it.
Tommy

junkyardpartseeker · 06-03-2003, 07:35 PM

Found you one

Email me directly and I will send you pics of it.
Tommy Davis

bigblock73 · 06-04-2003, 08:18 AM

Tommy, YGM!

05-22-2003, 10:39 PM	#1
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Blazer rear ashtray needed I need the drivers side ash tray assembly for the back seat of my 77 Blazer. I am not sure if left and right assemblies are the same (since i am missing one) and i am also not sure what yrs will fit. The assembly actually sits in the arm rest pad if that helps. Thanks - Jeff

05-23-2003, 09:13 AM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	If you are talking about the ones that go in the side panels I have A set out of my 78, I'm not going to be using my side panels so I don't need it, its not very clean though. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

05-28-2003, 12:34 AM	#5
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	what did you do put a bronco seat in it ?? even the 86 Silverado K5 I have does not have ashtrays in the arm rests. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-28-2003, 11:10 AM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	you can barely see where the ashtray goes on the drivers side of the rear seat...and NO this is not a ford seat! -Jeff Attached Images

05-28-2003, 01:19 PM	#8
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Oh, OK it's a Plymouth Trailduster seat . only kidding __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

05-23-2003, 09:18 AM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	No, I need the one that actually sits in the armrest of the rear seat. Thanks though! ...Jeff

05-27-2003, 08:57 PM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	bumpity bump anyone?

05-28-2003, 06:56 AM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Hll no Dave! The older Blazers had them in the arm rest...hopefully i can post a pic later today. ...Jeff

05-29-2003, 05:49 PM	#9
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray That seat looks similar to the 3rd seat I have in my 84 suburban. I know the ashtray you are looking for. I am going to the junkyard tomorrow for body parts and will look around for you one. What is the price range you are willing to spend for one minus shipping. So I will know a price range to stay in. Tommy Little Rock,AR __________________ junkyardpartseeker@sbcglobal.net

05-29-2003, 07:23 PM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Thanks Tommy, I really don't want to spend more than $5 or so plus shipping...if anyone tries to sell it for more than $5 they should be shot! Thanks! -Jeff

05-30-2003, 12:54 AM	#11
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray Jeff, I will make sure I keep the price under the $5 limit. I know that shipping via priority is $3.85 not sure what parcel post is. If I find one on friday or saturday, I will email you and let you know. Don't get your hopes up, just keep your fingers crossed. I have a few junkyards here with suburban and blazers in them. Tommy Davis Little Rock,AR especiallyforyou@sbcglobal.net __________________ junkyardpartseeker@sbcglobal.net

06-03-2003, 12:44 AM	#12
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Tommy, did you have any luck with finding an ashtray? Anyone else?? ...Jeff

06-03-2003, 01:34 AM	#13
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	I thought I saw one last time I was at the junk yard. Want me to go look? Everytime I say I see something, I go back & everything is striped Let me know by PM __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

06-03-2003, 02:10 AM	#14
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	Bigblock73 Haven't found one yet. Still have a few of the junkyards to check out. If I can't find one here, I am sure someone can. I do believe the ashtray from the armrest of a 3rd seat in a suburban will fit. Like I said, your seat is shaped just like my 3rd seat. I will keep looking and let you know if I find it. Tommy __________________ junkyardpartseeker@sbcglobal.net

06-03-2003, 07:35 PM	#15
junkyardpartseeker Registered User Join Date: Mar 2003 Location: Mabelvale, AR Posts: 695	ashtray Found you one Email me directly and I will send you pics of it. Tommy Davis __________________ junkyardpartseeker@sbcglobal.net Last edited by junkyardpartseeker; 06-03-2003 at 07:42 PM.



Register or Log In To remove these advertisements.

06-04-2003, 08:18 AM	#16
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Tommy, YGM!

Register or Log In To remove these advertisements.