Brand New DJM 3/5 Kit for 1.25 Rotors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

r0lf- · 05-24-2003, 04:53 PM

DJM 3" Drop spindles and 5" flip kit. Spindles are for 1.25" Rotors...

Asking 250 + Shipping... Paid $330

Nothing has been on the truck, all brand new. Purchased a new truck and dont need this anymore.

Will post pics If requested.

81chevystep · 05-25-2003, 02:33 PM

will you just sell the flip kit??

r0lf- · 05-25-2003, 06:27 PM

Id rather keep it all together. The flip kit is pretty inexpensive even new. The spindles are what cost so much damned money.

TIMSPEED · 05-25-2003, 08:51 PM

That's a damn good price. Those Spindles are $250 ALONE. That's basically like buying the spindles and getting the $80 flip kit for free.

boataddict26 · 05-25-2003, 09:39 PM

Can you post some pics?

r0lf- · 05-26-2003, 11:09 AM

a

r0lf- · 05-26-2003, 11:10 AM

b

r0lf- · 05-26-2003, 11:13 AM

As you can see, I have only taken one spindle out of the box. Everything else hasnt event been taken out. I can throw in some matching Doetsch tech shocks for an even 400 plus shipping.

boataddict26 · 05-26-2003, 04:04 PM

I do not understand this whole lowering thing yet, but if I got the stuff that you are selling, and I wanted 4in drop in the front, could I cut the springs down alittle to get the extra drop I want? And can someone explain to me how the flip kit works? Also, why would the rear get drop 5in and the front only 3? Is this because of the engine weight?
Thanks

r0lf- · 05-26-2003, 04:44 PM

No, the rear end sits 2 inches higher on a stock truck, this is called rake.

To get rid of this and give the truck a more sporty look, you lower the rear two more inches.

boataddict26 · 05-26-2003, 06:06 PM

Do you have ball joints for the spindals? And could I cut the springs to get the front lower? With the flip kit, I have lowering leaf springs already, would they work with these or would I need thicker ones. This seems to be what I am looking for if I can cut the springs to lower the front more. If I can get the money together before you sell them I will take them.

*Pardue'sCustoms* · 05-26-2003, 10:51 PM

sent you a pm

Myride · 05-31-2003, 06:57 PM

Is the kit sold? And how much to ship to 97008 and do you except paypal.

r0lf- · 05-31-2003, 11:19 PM

Parude, clear your mailbox.

*Pardue'sCustoms* · 06-01-2003, 08:44 AM

i cleaned it out thanks

**Captkaos** · 06-02-2003, 02:38 PM

Did you sell these yet? PM me....

*Pardue'sCustoms* · 06-02-2003, 10:07 PM

thanks

cochino12 · 06-03-2003, 10:25 AM

Is this sold yet?

78SilveradoSWB · 06-03-2003, 11:12 AM

It looks he is leaving you all in suspense....FYI: Stylin Concepts is selling the 3/5 drop kit using DJM 1.25 spindles and DJM 5" flip kit w/shock relocators for $299.95 plus shipping. Thats only $50 more than he is asking.

r0lf- · 06-03-2003, 01:01 PM

Sorry... i forgot to keep this thread updated. I am selling it to Pardue. Im making it a Suspension/Shock combo. It is sold.

05-24-2003, 04:53 PM	#1
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Brand New DJM 3/5 Kit for 1.25 Rotors DJM 3" Drop spindles and 5" flip kit. Spindles are for 1.25" Rotors... Asking 250 + Shipping... Paid $330 Nothing has been on the truck, all brand new. Purchased a new truck and dont need this anymore. Will post pics If requested.

05-25-2003, 08:51 PM	#4
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	That's a damn good price. Those Spindles are $250 ALONE. That's basically like buying the spindles and getting the $80 flip kit for free. __________________ I have a few cars... See Them Here

05-25-2003, 09:39 PM	#5
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Can you post some pics? __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

05-26-2003, 11:09 AM	#6
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	a Attached Images

05-26-2003, 11:10 AM	#7
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	b Attached Images

05-25-2003, 02:33 PM	#2
81chevystep ShadeTree Kustomz Join Date: Dec 2002 Location: spring, texas Posts: 300	will you just sell the flip kit??

05-25-2003, 06:27 PM	#3
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Id rather keep it all together. The flip kit is pretty inexpensive even new. The spindles are what cost so much damned money.

05-26-2003, 11:13 AM	#8
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	As you can see, I have only taken one spindle out of the box. Everything else hasnt event been taken out. I can throw in some matching Doetsch tech shocks for an even 400 plus shipping. Attached Images

05-26-2003, 04:04 PM	#9
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Question.. I do not understand this whole lowering thing yet, but if I got the stuff that you are selling, and I wanted 4in drop in the front, could I cut the springs down alittle to get the extra drop I want? And can someone explain to me how the flip kit works? Also, why would the rear get drop 5in and the front only 3? Is this because of the engine weight? Thanks __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money. Last edited by boataddict26; 05-26-2003 at 06:07 PM.

05-26-2003, 04:44 PM	#10
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	No, the rear end sits 2 inches higher on a stock truck, this is called rake. To get rid of this and give the truck a more sporty look, you lower the rear two more inches.

05-26-2003, 06:06 PM	#11
boataddict26 Registered User Join Date: Mar 2003 Location: North Central Florida Posts: 726	Do you have ball joints for the spindals? And could I cut the springs to get the front lower? With the flip kit, I have lowering leaf springs already, would they work with these or would I need thicker ones. This seems to be what I am looking for if I can cut the springs to lower the front more. If I can get the money together before you sell them I will take them. __________________ 1978 Chevy C10 Currently under resto. 350 Getting face lift. .060, JEpistons, Modify heads. More will come with money.

05-26-2003, 10:51 PM	#12
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	sent you a pm

05-31-2003, 06:57 PM	#13
Myride Registered User Join Date: Mar 2002 Location: Pacific Northwest Posts: 292	Is the kit sold? And how much to ship to 97008 and do you except paypal.

05-31-2003, 11:19 PM	#14
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Parude, clear your mailbox. __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

06-01-2003, 08:44 AM	#15
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	i cleaned it out thanks



Register or Log In To remove these advertisements.

06-02-2003, 02:38 PM	#16
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Did you sell these yet? PM me.... __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

06-02-2003, 10:07 PM	#17
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 621	thanks

06-03-2003, 10:25 AM	#18
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Is this sold yet? __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

06-03-2003, 11:12 AM	#19
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	It looks he is leaving you all in suspense....FYI: Stylin Concepts is selling the 3/5 drop kit using DJM 1.25 spindles and DJM 5" flip kit w/shock relocators for $299.95 plus shipping. Thats only $50 more than he is asking. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

06-03-2003, 01:01 PM	#20
r0lf- Hotwheels? Join Date: Dec 2002 Location: Pleasant Hill, CA Posts: 1,145	Sorry... i forgot to keep this thread updated. I am selling it to Pardue. Im making it a Suspension/Shock combo. It is sold. __________________ 1978 Money Pit - CUSTOM DELUXE!!!!

Register or Log In To remove these advertisements.