The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-25-2024, 08:22 PM   #1
jakewalter
Senior Member
 
jakewalter's Avatar
 
Join Date: Feb 2015
Location: Traverse City, MI
Posts: 244
I I would really like a turbo 400 in my truck

I have a 85 K20 that I built up to haul our 3500 pound pickup camper.

It currently has a pretty healthy big block that I built for torque.

The transmission is a 700R4 and a 208 transfer case.

While on vacation a couple of weeks ago the transmission started slipping and I lost reverse.

I never use the overdrive and as for mileage I threw my pencil away a long time ago.

Other than a TH400 out of a 4wd what else would I need?

I would really appreciate any input that you guys could share with me.

I need to apologize.
The guy that rebuilt my transfer case said that it is a 208 not a 203.
__________________
1967 Chevy SBSS Bone stock
1974 Chevy Cheyenne 4wd long bed
1985 Chevy Scottsdale 4wd long bed
2000 Chevy 1 ton 4wd dually quad cab
2004 GMC Sierra 4wd Super cab long bed

Last edited by jakewalter; 10-26-2024 at 01:53 PM.
jakewalter is offline   Reply With Quote
Old 10-25-2024, 08:25 PM   #2
Accelo
Senior Member
 
Accelo's Avatar
 
Join Date: Mar 2015
Location: washington
Posts: 2,288
Re: I I would really like a turbo 400 in my truck

The correct adapter plate for the 400. The 700R4/4L60 uses the same bolt pattern as the THM350.
You also need to have the modified THM 400 input shaft on the 203. It typically requires re-boring for the larger bearing required for the larger THM 400 output shaft.
Edited
Sorry, I confused the 203 and 205 boxes

Last edited by Accelo; 10-26-2024 at 03:45 AM.
Accelo is offline   Reply With Quote
Old 10-26-2024, 12:14 AM   #3
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,599
Re: I I would really like a turbo 400 in my truck

The electric kick down switch. Early versions were set on the intake behind the carb. When cable throttles happened, the switch moved into the cab.
Dead Parrot is offline   Reply With Quote
Old 10-26-2024, 01:29 AM   #4
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,624
Re: I I would really like a turbo 400 in my truck

203 transfer cases do not have to be bored out, they already have the 210 bearing in them, you will need the 400/203 adapter and a 32 spline input gear for the gear box and have it swapped in--which is a chore in itself---not hard but time consuming as you have to separate the 4x4 chain box from the low range gear box. If you decide to go through with this I should have the parts sitting around here somewhere.


Looks like OP edited his parts. Same still holds for parts. Adapter and input gear, but also the 400 needs the proper output shaft for the thickness of the adapter. The 208 is a lot easier to rebuild. I do not have a gear for the 208, but they can be had for about 100-120 dollars, plus a good time to rebuild it with new bearing, fork pads and a chain. I have an adapter and possibly the output shaft needed for the 400

Last edited by kwmech; 10-26-2024 at 01:04 PM.
kwmech is online now   Reply With Quote
Old 10-26-2024, 01:51 PM   #5
jakewalter
Senior Member
 
jakewalter's Avatar
 
Join Date: Feb 2015
Location: Traverse City, MI
Posts: 244
Re: I I would really like a turbo 400 in my truck

Quote:
Originally Posted by Accelo View Post
The correct adapter plate for the 400. The 700R4/4L60 uses the same bolt pattern as the THM350.
You also need to have the modified THM 400 input shaft on the 203. It typically requires re-boring for the larger bearing required for the larger THM 400 output shaft.
Edited
Sorry, I confused the 203 and 205 boxes
I need to apologize.
The guy that rebuilt my transfer case said that it is a 208 not a 203.
__________________
1967 Chevy SBSS Bone stock
1974 Chevy Cheyenne 4wd long bed
1985 Chevy Scottsdale 4wd long bed
2000 Chevy 1 ton 4wd dually quad cab
2004 GMC Sierra 4wd Super cab long bed
jakewalter is offline   Reply With Quote
Old 10-26-2024, 01:59 PM   #6
jakewalter
Senior Member
 
jakewalter's Avatar
 
Join Date: Feb 2015
Location: Traverse City, MI
Posts: 244
Re: I I would really like a turbo 400 in my truck

Quote:
Originally Posted by Accelo View Post
The correct adapter plate for the 400. The 700R4/4L60 uses the same bolt pattern as the THM350.
You also need to have the modified THM 400 input shaft on the 203. It typically requires re-boring for the larger bearing required for the larger THM 400 output shaft.
Edited
Sorry, I confused the 203 and 205 boxes
Quote:
Originally Posted by kwmech View Post
203 transfer cases do not have to be bored out, they already have the 210 bearing in them, you will need the 400/203 adapter and a 32 spline input gear for the gear box and have it swapped in--which is a chore in itself---not hard but time consuming as you have to separate the 4x4 chain box from the low range gear box. If you decide to go through with this I should have the parts sitting around here somewhere.

Looks like OP edited his parts. Same still holds for parts. Adapter and input gear, but also the 400 needs the proper output shaft for the thickness of the adapter. The 208 is a lot easier to rebuild. I do not have a gear for the 208, but they can be had for about 100-120 dollars, plus a good time to rebuild it with new bearing, fork pads and a chain. I have an adapter and possibly the output shaft needed for the 400
I need to apologize.
The guy that rebuilt my transfer case said that it is a 208 not a 203.
__________________
1967 Chevy SBSS Bone stock
1974 Chevy Cheyenne 4wd long bed
1985 Chevy Scottsdale 4wd long bed
2000 Chevy 1 ton 4wd dually quad cab
2004 GMC Sierra 4wd Super cab long bed
jakewalter is offline   Reply With Quote
Old 10-26-2024, 08:21 PM   #7
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,371
Re: I I would really like a turbo 400 in my truck

The 203 is my favorite transfer case and those are the only trucks that I buy. I would take the easy route and go with the bulletproof 203.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 10-26-2024, 09:56 PM   #8
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 8,366
Re: I I would really like a turbo 400 in my truck

Your ideal setup IMHO would be.

A combo of T400 with a 205-transfer case.

Any change will require driveshaft modifications.

The 205 transfer case is (All Gears) the toughest.

The 203 Transfer case is (what I have always had) has a Chain drive.

The 208 Transfer case has an Aluminum case.

If you study this website in the link below about the adapters, it will give you a better idea.

Link: https://www.advanceadapters.com/
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)


http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Old 10-27-2024, 10:15 AM   #9
v30crewcab
Registered User
 
v30crewcab's Avatar
 
Join Date: Apr 2012
Location: Chatt Tn
Posts: 978
Re: I I would really like a turbo 400 in my truck

you can also hunt up a 32 spline 241. they were in the 88-91 suburbans, and are pretty strong.
__________________
88 military v30 crewcab shortbed 5.9 cummins, nv4500, 205
86 k30, 89 diesel burb, 76 gmc pathfinder
71 longbed 5.3 4l80
http://67-72chevytrucks.com/vboard/s...d.php?t=522535
v30crewcab is offline   Reply With Quote
Old 10-27-2024, 12:23 PM   #10
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,624
Re: I I would really like a turbo 400 in my truck

Quote:
Originally Posted by v30crewcab View Post
you can also hunt up a 32 spline 241. they were in the 88-91 suburbans, and are pretty strong.
Really hard to find though
kwmech is online now   Reply With Quote
Old 10-27-2024, 07:19 PM   #11
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,371
Re: I I would really like a turbo 400 in my truck

Didn't those military CUCV trucks have th400's and 208 transfer cases? There must be a few of those coming up for sale from time to time.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 10-27-2024, 08:58 PM   #12
franken
Registered User
 
Join Date: Jun 2013
Location: Somewhere
Posts: 3,112
Re: I I would really like a turbo 400 in my truck

As I recall in the late 80s and/or early 90s GM put a TH400/NP205 setup in trucks. Pretty rare but its another option if the 1.96:1 low of the TC is ok.
franken is offline   Reply With Quote
Old 10-28-2024, 09:43 AM   #13
THI
Active Member
 
THI's Avatar
 
Join Date: Jan 2017
Location: Traverse City, MI
Posts: 194
Re: I I would really like a turbo 400 in my truck

I have a TH400 with a 32 spined output for a 208/241 along with the adaptor that I will not be using. The trans was rebuilt about three years ago and sitting in heated storage since due to health reasons. It is in a storage building near Empire.
THI is offline   Reply With Quote
Old 10-28-2024, 11:37 AM   #14
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,624
Re: I I would really like a turbo 400 in my truck

Well there ya go.
kwmech is online now   Reply With Quote
Old 10-28-2024, 11:56 AM   #15
THI
Active Member
 
THI's Avatar
 
Join Date: Jan 2017
Location: Traverse City, MI
Posts: 194
Re: I I would really like a turbo 400 in my truck

I even have the kickdown switch and wiring.
THI is offline   Reply With Quote
Old 10-28-2024, 12:00 PM   #16
GRADYS Performance
Registered User
 
GRADYS Performance's Avatar
 
Join Date: Dec 2013
Location: Columbus, Oh
Posts: 367
Re: I I would really like a turbo 400 in my truck

Not quite as easy, But what about swapping a 4L80. Strength of a TH400. With Overdrive and a Lockup torque converter.
GRADYS Performance is offline   Reply With Quote
Old 10-29-2024, 10:50 AM   #17
jakewalter
Senior Member
 
jakewalter's Avatar
 
Join Date: Feb 2015
Location: Traverse City, MI
Posts: 244
Re: I I would really like a turbo 400 in my truck

Quote:
Originally Posted by THI View Post
I have a TH400 with a 32 spined output for a 208/241 along with the adaptor that I will not be using. The trans was rebuilt about three years ago and sitting in heated storage since due to health reasons. It is in a storage building near Empire.

PM sent
__________________
1967 Chevy SBSS Bone stock
1974 Chevy Cheyenne 4wd long bed
1985 Chevy Scottsdale 4wd long bed
2000 Chevy 1 ton 4wd dually quad cab
2004 GMC Sierra 4wd Super cab long bed
jakewalter is offline   Reply With Quote
Old 10-29-2024, 10:25 PM   #18
cadillac_al
Registered User
 
Join Date: Oct 2013
Location: Maine
Posts: 2,371
Re: I I would really like a turbo 400 in my truck

I don't think Jake's 208 has the 32 spline input. It shouldn't be that hard to buy one though.
__________________
76 Chevy K20
76 GMC K15
77 Chevy C10
77 Chevy K10
cadillac_al is offline   Reply With Quote
Old 10-30-2024, 11:17 AM   #19
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,624
Re: I I would really like a turbo 400 in my truck

Quote:
Originally Posted by cadillac_al View Post
I don't think Jake's 208 has the 32 spline input. It shouldn't be that hard to buy one though.
Input gear can be swapped out with a rebuild/refresh easily enough
kwmech is online now   Reply With Quote
Old 11-05-2024, 11:35 AM   #20
jakewalter
Senior Member
 
jakewalter's Avatar
 
Join Date: Feb 2015
Location: Traverse City, MI
Posts: 244
Re: I I would really like a turbo 400 in my truck

Good morning everyone,

I would like to thank all of you for your advice and input.

I have decided to rebuild my NP208 and replace the input shaft to a 32 spline.

Now I need to find a good place to order the rebuild kit and the input shaft.

Any thoughts would be appreciated.

I don’t mind paying the extra cost for quality parts.

Thanks so much,
Jake
__________________
1967 Chevy SBSS Bone stock
1974 Chevy Cheyenne 4wd long bed
1985 Chevy Scottsdale 4wd long bed
2000 Chevy 1 ton 4wd dually quad cab
2004 GMC Sierra 4wd Super cab long bed
jakewalter is offline   Reply With Quote
Old 11-05-2024, 12:01 PM   #21
kwmech
Senior Member
 
Join Date: Mar 2003
Location: Colfax-California
Posts: 8,624
Re: I I would really like a turbo 400 in my truck

https://www.offroaddesign.com/transfer-case/np208.html
kwmech is online now   Reply With Quote
Old 11-05-2024, 01:56 PM   #22
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 8,366
Re: I I would really like a turbo 400 in my truck

https://torqueking.com/category/1981...transfer-case/
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)


http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com