will 455 mount up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

taylorde · 04-23-2006, 10:15 PM

I have a 455 how can I go about mounting it up? Will it bolt up like a 454?

Longhorn Man · 04-23-2006, 10:19 PM

What kind of 455? Buick, Old, or Pontiac?
Anything will fin in these trucks, but it won't simply bolt in. If you are lucky, you'll have minimal fabbing to do, but just about any gas motor you could find will fit. (I have a Cad 500 in mine)

taylorde · 04-23-2006, 10:23 PM

it is a buick. it is tuned to about 500hp and 567ftlb torq. and it still has the mounts on it but how do I go about finding the right angles and were to mount it in the right spot

Chevrolet4x4s · 04-23-2006, 10:38 PM

Aren't 455s bellhousing pattern bop also?So wouldnt an adapter plate be in need or a bop bellhousing?
Shane

Longhorn Man · 04-23-2006, 10:55 PM

Like I said, not a direct bolt in. yes, either a BOP tranny, or an adapter plate would be needed.
As for how to mount it, I say pull the front clip off, remove what is there already, dangle the motor in there bolted to the tranny, See if it's going to clear everything, and then figure how to bolt it down. 73 - 87 engine mount towers are great for odd ball engines. Mine had a pontiac 350 in it, and now the aformentioned cad motor on those towers.
Then, simply reroute fuel lines if need be, move battery to other side with an Aux battery tray if need be, hook it all up and head to the muffler shop for some pipe work.
Here's how i did my caddy swap, much info which you could use on your swap. (we want pics when you're done)
http://www.geocities.com/caddyoneton/

taylorde · 04-23-2006, 11:33 PM

well i also got the tranny it is on the motor it is a turbo 400 with no adapter plate

milehightoyz · 04-23-2006, 11:38 PM

ive got a 455 olds motor in my 72 burb almost a bolt in ordeal.

taylorde · 04-23-2006, 11:52 PM

pics and help please. i'm lost

c10crazy · 04-24-2006, 09:04 AM

455's rock

DJ72CHEVY · 04-24-2006, 09:41 AM

I will be putting a 455 Buick in my 72'. But, I am still working on the frame and suspension. The motor and tranny came out of a 70' Chevy truck, I got the motor mounts with the motor, I don't know what they came out of, but they are hacked up abit. It looked like the engine and tranny were in the stock locations.

cdowns · 04-24-2006, 10:07 AM

well with the th400 you'll need to convert to a highhump floor

Longhorn Man · 04-24-2006, 02:38 PM

Quote:

Originally Posted by cdowns

well with the th400 you'll need to convert to a highhump floor

*MIGHT* need to go to a hugh hump.

It all depends on how high the engine is sitting once it's all done and overwith, and also fore and aft will help determine that too.

taylorde · 04-24-2006, 10:33 PM

how much clearance is needed around the bellhousing

04-23-2006, 10:15 PM	#1
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	will 455 mount up I have a 455 how can I go about mounting it up? Will it bolt up like a 454? __________________ :hit:

04-23-2006, 10:19 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: will 455 mount up What kind of 455? Buick, Old, or Pontiac? Anything will fin in these trucks, but it won't simply bolt in. If you are lucky, you'll have minimal fabbing to do, but just about any gas motor you could find will fit. (I have a Cad 500 in mine)

04-23-2006, 10:23 PM	#3
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	Re: will 455 mount up it is a buick. it is tuned to about 500hp and 567ftlb torq. and it still has the mounts on it but how do I go about finding the right angles and were to mount it in the right spot __________________ :hit:

04-23-2006, 10:38 PM	#4
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: will 455 mount up Aren't 455s bellhousing pattern bop also?So wouldnt an adapter plate be in need or a bop bellhousing? Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

04-23-2006, 10:55 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: will 455 mount up Like I said, not a direct bolt in. yes, either a BOP tranny, or an adapter plate would be needed. As for how to mount it, I say pull the front clip off, remove what is there already, dangle the motor in there bolted to the tranny, See if it's going to clear everything, and then figure how to bolt it down. 73 - 87 engine mount towers are great for odd ball engines. Mine had a pontiac 350 in it, and now the aformentioned cad motor on those towers. Then, simply reroute fuel lines if need be, move battery to other side with an Aux battery tray if need be, hook it all up and head to the muffler shop for some pipe work. Here's how i did my caddy swap, much info which you could use on your swap. (we want pics when you're done) http://www.geocities.com/caddyoneton/

04-23-2006, 11:33 PM	#6
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	Re: will 455 mount up well i also got the tranny it is on the motor it is a turbo 400 with no adapter plate __________________ :hit:

04-23-2006, 11:38 PM	#7
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	Re: will 455 mount up ive got a 455 olds motor in my 72 burb almost a bolt in ordeal.

04-23-2006, 11:52 PM	#8
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	Re: will 455 mount up pics and help please. i'm lost __________________ :hit:

04-24-2006, 09:04 AM	#9
c10crazy Like a Rock! Join Date: May 2002 Location: USA Posts: 1,092	Re: will 455 mount up 455's rock __________________ 69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park!

04-24-2006, 09:41 AM	#10
DJ72CHEVY Registered User Join Date: Nov 2004 Location: Brenham, Texas Posts: 79	Re: will 455 mount up I will be putting a 455 Buick in my 72'. But, I am still working on the frame and suspension. The motor and tranny came out of a 70' Chevy truck, I got the motor mounts with the motor, I don't know what they came out of, but they are hacked up abit. It looked like the engine and tranny were in the stock locations.

04-24-2006, 10:07 AM	#11
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: will 455 mount up well with the th400 you'll need to convert to a highhump floor __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-24-2006, 10:33 PM	#13
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	Re: will 455 mount up how much clearance is needed around the bellhousing __________________ :hit:



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.