|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-08-2017, 02:23 PM
|
#1 |
|
Senior Member
 
Join Date: Dec 1999
Location: TX
Posts: 1,528
|
250 Inline Air Injection Tubes
  I have my engine out and to clean up(paint) and fix leaks. I briefly caught a glimpse of something moving in one of the intake ports. I stuck my finger in and felt these little tubes flopping around. I went ahead and pulled the plugs out and took the little tubes out. Were they just lazy when they put the plugs in and didn't pull them out? Any pro's or con's to having them out? |
|
|
|
03-08-2017, 04:52 PM
|
#2 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,060
|
Re: 250 Inline Air Injection Tubes
Totally lazy. If not incompetant. Anyway just pull the tubes and seal the ports.
The A.I.R. system was bogus from day one.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
|
03-08-2017, 11:19 PM
|
#3 |
|
Registered User
Join Date: Nov 2015
Location: Alberta
Posts: 464
|
Re: 250 Inline Air Injection Tubes
Mine were still in too They were carboned up and stuck tight but a small pry bar levered most of them out easy. The 2 forward ones were stuck and wanted to fold up and kink. I had to sharpen a bolt almost like a pencil point and thread in from the top half a turn and they broke loose and free spun. Then pried out easy after that.
__________________
-Cody |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
