painted my column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orangeuavol · 02-12-2005, 08:23 PM

Painted my column today. I couldn't find saddle paint, but was able to have to paint matched to the steering wheel. I also finished converting a truck door to a blazer door, finished patching both inner fenders and the passenger side fender patched.

orangeuavol · 02-12-2005, 08:25 PM

more pics

**Canadian694x4** · 02-12-2005, 08:43 PM

Looks Great! Keep up the great progress!

TRUCKGUY · 02-12-2005, 09:27 PM

did you sand it first? what brand of paint you use? does it matter?

c-1072 · 02-12-2005, 10:26 PM

just a ? was that a new truck door and if so why not buy a blazer door ? just wondering .Also how was the conversion prosses any dos or donts to share .
Thanks

Gyva · 02-12-2005, 10:43 PM

I just converted a truck door to a blazer door too not 4 days ago,,,, all I used was a angle grinder. did you transfer over the rubber window slider with block off. the trucks didn't have those or the top plastic piece that you have to drill 2 holes for and shave a side at an angle to get it to fit... rock on.

orangeuavol · 02-13-2005, 12:01 AM

Quote:

Originally Posted by TRUCKGUY

did you sand it first? what brand of paint you use? does it matter?

Sanded all the metal parts to bare metal, primed, and used Dupont acrylic enamel. The two plastic pieces I just roughed up with some 320 grit, primed, and sprayed with the acrylic enamel. The shifter piece is 'pot' metal so I used rattle can filler primer and spot-n-glaze putty to smooth it up.

orangeuavol · 02-13-2005, 12:05 AM

Quote:

Originally Posted by c-1072

just a ? was that a new truck door and if so why not buy a blazer door ? just wondering .Also how was the conversion prosses any dos or donts to share .
Thanks

That was a door off of the parts truck I bought this summer. The primer was a just a first coat to use as a guide to check if my patches were high or low. The hinges on my blazer door were ripping out. It was just easier to make a door since I had one to use. The conversion was pretty simple since I had a "go by". All I used was an angle die grinder with a metal cut off wheel.

orangeuavol · 02-13-2005, 12:06 AM

Quote:

Originally Posted by Gyva

I just converted a truck door to a blazer door too not 4 days ago,,,, all I used was a angle grinder. did you transfer over the rubber window slider with block off. the trucks didn't have those or the top plastic piece that you have to drill 2 holes for and shave a side at an angle to get it to fit... rock on.

yep.

Trifelynn · 02-13-2005, 04:41 AM

a "?" as well, on my end....

What was your "go by"? the blazer door?

orangeuavol · 02-13-2005, 10:43 AM

Quote:

Originally Posted by Trifelynn

a "?" as well, on my end....

What was your "go by"? the blazer door?

yep. transfered the measurement using measurment calipers.

LUV2XCLR8 · 02-13-2005, 11:05 AM

LOOKS GREAT UAVOL

orangeuavol · 02-14-2005, 07:35 PM

here's a few more pics

**FRENCHBLUE72** · 02-14-2005, 09:45 PM

Looks Damn Good...

wally402 · 02-14-2005, 09:51 PM

Some day I to will be at that point. looks good

02-12-2005, 08:23 PM	#1
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 725	painted my column Painted my column today. I couldn't find saddle paint, but was able to have to paint matched to the steering wheel. I also finished converting a truck door to a blazer door, finished patching both inner fenders and the passenger side fender patched. Attached Images __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

02-12-2005, 08:25 PM	#2
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 725	few more pics more pics Attached Images __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission.

02-12-2005, 08:43 PM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,306	Looks Great! Keep up the great progress! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 20 Yrs - 1 of 208 Built & Sold In Canada! - 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 2 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 15 Yrs - 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 13 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 6 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

02-12-2005, 09:27 PM	#4
TRUCKGUY Registered User Join Date: Jan 2005 Location: Nortonville, Ky Posts: 407	did you sand it first? what brand of paint you use? does it matter? __________________ Dan. 55 F100 panel truck project 64 350/th400/10bolt short fleet 66 F100 302/C6/9" short fleet 67 IH 4x2 304/t984speed D44 373 locker lwb box 67 IH 4x4 304/t98 4speed/d44/d60 4.10'slwb box 67 IH Travelall 4x4 304/t98 4speed/12bolt/10bolt 81 2wd short fleet current build! 83 350/700r4 short fleet 88 k5 12" lift 3/4 ton swap mud toy 96 Dodge 3500 CUMMINS/5speed/4x2 97 Pontiac Trans Am WS6/LT1 383/6speed/T-tops

02-12-2005, 10:26 PM	#5
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	door just a ? was that a new truck door and if so why not buy a blazer door ? just wondering .Also how was the conversion prosses any dos or donts to share . Thanks Last edited by c-1072; 02-12-2005 at 10:28 PM.

02-12-2005, 10:43 PM	#6
Gyva Registered User Join Date: Jan 2005 Location: Mountain Home Idaho Posts: 544	I just converted a truck door to a blazer door too not 4 days ago,,,, all I used was a angle grinder. did you transfer over the rubber window slider with block off. the trucks didn't have those or the top plastic piece that you have to drill 2 holes for and shave a side at an angle to get it to fit... rock on.

02-13-2005, 04:41 AM	#10
Trifelynn Registered User Join Date: May 2004 Location: Williston, North Dakota Posts: 469	a "?" as well, on my end.... What was your "go by"? the blazer door? __________________ Always looking for a 2wd blazer

02-13-2005, 11:05 AM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	LOOKS GREAT UAVOL __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-14-2005, 07:35 PM	#13
orangeuavol GO VOLS! Join Date: May 2001 Location: Knoxville, TN Posts: 725	few more pics here's a few more pics Attached Images __________________ http://1972blazer.shutterfly.com/<= blazer build pics It's called golf because all the other four letter words were taken. It's easier to ask for forgiveness than for permission. Last edited by orangeuavol; 02-14-2005 at 07:37 PM.

02-14-2005, 09:45 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Looks Damn Good... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-14-2005, 09:51 PM	#15
wally402 Registered User Join Date: Feb 2005 Location: Sumter SC. Posts: 8	Some day I to will be at that point. looks good __________________ 1972 Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.