Swapped PCV & gained big time! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kelz702 · 10-03-2019, 07:40 PM

Quote:

Originally Posted by geezer#99

People have been having idle problems with a bunch of quickfuel carbs.
Maybe you’ll find some info here on a 670.

https://www.hotrodders.com/forum/hol...ix-507033.html

What do you run for timing?
Initial?
Mechanical?
Vac advance numbers?

Thanks for the link. I'll definitely check it out. I'm not sure about the timing. It's been awhile since I put a light on it. The timing had to be adjusted a couple years ago when I took it in to get it smogged so I'm not sure where he set it. I'll get a light tomorrow and get the all the timiming numbers.

DieselSJ · 10-04-2019, 03:08 PM

Quote:

Originally Posted by bosephus

Per their website,they offer a 25% discount for a group buy of 8 or more units.

I'd be in if we could arrange one.

kelz702 · 10-04-2019, 04:38 PM

Quote:

Originally Posted by DieselSJ

I'd be in if we could arrange one.

Sweet. We'll see if 6 more people want to jump on board

**MySons68C20** · 10-04-2019, 04:48 PM

Sorry kind of late getting back here. I have had a good experience with this pcv valve as it cleaned up my idle and works as advertised.
My 383 pulls 15 in of vacuum and is currently running 18 deg initial timing with 20 deg mechanical advance in the distributor all in by 2000 rpms. I am running a vacuum advance can which is set to add 10 deg timing using the full manifold vacuum port. The carb is a Quickfuel Hotrod series 670 cfm with vacuum secondaries. Hope this is helpful!

**Ironangel** · 10-06-2019, 04:57 AM

I'm in for one, PM me when your ready...

**The Rocknrod** · 10-06-2019, 06:54 AM

25%? I'm in.

**Rickysnickers** · 10-06-2019, 10:20 AM

I'll go for one too

kelz702 · 10-06-2019, 11:19 AM

Nice! I think we need 1 more person. I just read on the site that its 6 or more people.
http://mewagner.com/?page_id=1927

weq92f · 10-06-2019, 11:47 AM

.
I'm in.

-klb

kelz702 · 10-06-2019, 05:54 PM

Excellent! I'll email the sales department at m/e wagner and register our group buy. I'll keep everyone posted.

**BlueBoy72** · 10-06-2019, 10:23 PM

I'm in for one if its not too late.
Thanks.

Husker · 10-06-2019, 10:55 PM

Hey Kelz702 I will go in for one, at 25% off.
Ron

kelz702 · 10-06-2019, 11:33 PM

Quote:

Originally Posted by BlueBoy72

I'm in for one if its not too late.
Thanks.

Cool. It's not too late. I emailed their sales department earlier today. I expect to hear back from them sometime tomorrow. Once they email me back, they will assign us a group purchase name and set a time period for us to place our orders. I will be posting all the information as I get it.

**Ironangel** · 10-07-2019, 01:26 AM

Quote:

Originally Posted by kelz702

Cool. It's not too late. I emailed their sales department earlier today. I expect to hear back from them sometime tomorrow. Once they email me back, they will assign us a group purchase name and set a time period for us to place our orders. I will be posting all the information as I get it.

Cool beans, keep me posted.

AcampoDave · 10-07-2019, 09:56 AM

Me too. I want another one.

weq92f · 10-07-2019, 12:17 PM

.
Oooo Free shipping too Ooooo

-klb

kelz702 · 10-07-2019, 01:06 PM

Here we go guys!! This is the email they sent me this morning with all the info for our group buy.

Hello,

We are looking forward to your group buy purchases.

People interested in ordering should send an e-mail to:

orders@mewagner.com or

barbara.wagner@mewagner.com

Mention the code ChevyTruck19 with their order. An invoice will be sent through PayPal. Please make sure they include their PayPal e-mail address if in fact they use a different e-mail for that purpose. Any credit card may be used to purchase, a PayPal account is not required. They may also place a phone order by calling 570-899-4544 and mention the code.

Please note US orders are free shipping. International or Canadian orders will be charged shipping.

The code will be honored until October 31, 2019.

Thanks again for your interest in our product and participating in our Group Buy Program.

Barbara Wagner

Customer Service
M/E Wagner Performance Products
barbara.wagner@mewagner.com
www.mewagner.com
570-899-4544

**The Rocknrod** · 10-07-2019, 01:19 PM

Cool. Just emailed them.

AcampoDave · 10-07-2019, 08:03 PM

I will phone mine in tomorrow.

54Caddy · 10-08-2019, 01:45 AM

Crazy I was just researching these today. Have a 67 I did for a customer with a 383 and he drives it hard. Getting oil out of breather & around pcv valve. Thinking this valve will help. But wish they had it in black. Have a mild 283 going in a 64 that could probably gain from this as well.

**Ironangel** · 10-08-2019, 02:28 AM

Quote:

Originally Posted by kelz702

Here we go guys!! This is the email they sent me this morning with all the info for our group buy.

Hello,

We are looking forward to your group buy purchases.

People interested in ordering should send an e-mail to:

orders@mewagner.com or

barbara.wagner@mewagner.com

Mention the code ChevyTruck19 with their order. An invoice will be sent through PayPal. Please make sure they include their PayPal e-mail address if in fact they use a different e-mail for that purpose. Any credit card may be used to purchase, a PayPal account is not required. They may also place a phone order by calling 570-899-4544 and mention the code.

Please note US orders are free shipping. International or Canadian orders will be charged shipping.

The code will be honored until October 31, 2019.

Thanks again for your interest in our product and participating in our Group Buy Program.

Barbara Wagner

Customer Service
M/E Wagner Performance Products
barbara.wagner@mewagner.com
www.mewagner.com
570-899-4544

Right on, thanks Kelz702!

geezer#99 · 10-08-2019, 08:52 AM

Quote:

Originally Posted by 54Caddy

Crazy I was just researching these today. Have a 67 I did for a customer with a 383 and he drives it hard. Getting oil out of breather & around pcv valve. Thinking this valve will help. But wish they had it in black. Have a mild 283 going in a 64 that could probably gain from this as well.

Likely not hard to engineer a black cover for one.

jaros44sr · 10-08-2019, 09:07 AM

Or cerakote it

**The Rocknrod** · 10-08-2019, 10:26 AM

Quote:

Originally Posted by jaros44sr

Or cerakote it

Nice idea.

Husker · 10-08-2019, 07:11 PM

Got an invoice, for 2 it was $193.50. Thank you Kelz702 for the leg work on this.
Ron

10-04-2019, 04:48 PM	#29
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 897	Re: Swapped PCV & gained big time! Sorry kind of late getting back here. I have had a good experience with this pcv valve as it cleaned up my idle and works as advertised. My 383 pulls 15 in of vacuum and is currently running 18 deg initial timing with 20 deg mechanical advance in the distributor all in by 2000 rpms. I am running a vacuum advance can which is set to add 10 deg timing using the full manifold vacuum port. The carb is a Quickfuel Hotrod series 670 cfm with vacuum secondaries. Hope this is helpful!

10-06-2019, 04:57 AM	#30
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Swapped PCV & gained big time! I'm in for one, PM me when your ready... __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

10-06-2019, 06:54 AM	#31
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Swapped PCV & gained big time! 25%? I'm in. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-06-2019, 10:20 AM	#32
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 2,933	Re: Swapped PCV & gained big time! I'll go for one too

10-06-2019, 11:19 AM	#33
kelz702 Registered User Join Date: Jun 2013 Location: las vegas nevada Posts: 60	Re: Swapped PCV & gained big time! Nice! I think we need 1 more person. I just read on the site that its 6 or more people. http://mewagner.com/?page_id=1927 Last edited by kelz702; 10-06-2019 at 11:26 AM.

10-06-2019, 11:47 AM	#34
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 2,869	Re: Swapped PCV & gained big time! . I'm in. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

10-06-2019, 05:54 PM	#35
kelz702 Registered User Join Date: Jun 2013 Location: las vegas nevada Posts: 60	Re: Swapped PCV & gained big time! Excellent! I'll email the sales department at m/e wagner and register our group buy. I'll keep everyone posted.

10-06-2019, 10:23 PM	#36
BlueBoy72 Active Member Join Date: Feb 2017 Location: Las Cruces,New Mexico Posts: 288	Re: Swapped PCV & gained big time! I'm in for one if its not too late. Thanks.

10-06-2019, 10:55 PM	#37
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,209	Re: Swapped PCV & gained big time! Hey Kelz702 I will go in for one, at 25% off. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

10-07-2019, 09:56 AM	#40
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,726	Re: Swapped PCV & gained big time! Me too. I want another one.

10-07-2019, 12:17 PM	#41
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 2,869	Re: Swapped PCV & gained big time! . Oooo Free shipping too Ooooo -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

10-07-2019, 01:06 PM	#42
kelz702 Registered User Join Date: Jun 2013 Location: las vegas nevada Posts: 60	Re: Swapped PCV & gained big time! Here we go guys!! This is the email they sent me this morning with all the info for our group buy. Hello, We are looking forward to your group buy purchases. People interested in ordering should send an e-mail to: orders@mewagner.com or barbara.wagner@mewagner.com Mention the code ChevyTruck19 with their order. An invoice will be sent through PayPal. Please make sure they include their PayPal e-mail address if in fact they use a different e-mail for that purpose. Any credit card may be used to purchase, a PayPal account is not required. They may also place a phone order by calling 570-899-4544 and mention the code. Please note US orders are free shipping. International or Canadian orders will be charged shipping. The code will be honored until October 31, 2019. Thanks again for your interest in our product and participating in our Group Buy Program. Barbara Wagner Customer Service M/E Wagner Performance Products barbara.wagner@mewagner.com www.mewagner.com 570-899-4544

10-07-2019, 01:19 PM	#43
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Swapped PCV & gained big time! Cool. Just emailed them. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

10-07-2019, 08:03 PM	#44
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,726	Re: Swapped PCV & gained big time! I will phone mine in tomorrow.

10-08-2019, 01:45 AM	#45
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Swapped PCV & gained big time! Crazy I was just researching these today. Have a 67 I did for a customer with a 383 and he drives it hard. Getting oil out of breather & around pcv valve. Thinking this valve will help. But wish they had it in black. Have a mild 283 going in a 64 that could probably gain from this as well. Attached Images __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage



Register or Log In To remove these advertisements.

10-08-2019, 09:07 AM	#48
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,421	Re: Swapped PCV & gained big time! Or cerakote it __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-08-2019, 07:11 PM	#50
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,209	Re: Swapped PCV & gained big time! Got an invoice, for 2 it was $193.50. Thank you Kelz702 for the leg work on this. Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

Register or Log In To remove these advertisements.