The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-26-2015, 10:23 PM   #1
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Dana 44 Original Steering Arm

Just got a new to me Dana 44 which came from a 1978 4x4, this will be going in a 1964 K10. I am questioning the steering arm as not being original.
I call the "steering arm" where the rear drag link connects, not sure what the technical term for it is. The one on this Dana 44 is straight out parallel to the axle which I think is incorrect. Photos of this Dana 44 are first and a 1983 10 bolt second below. Should it curve and be perpendicular to the front axle like the one, on the 10 bolt? Diagrams of 44 parts show it like the 10 bolt photo too.


The one on this axle could be from a lift kit?? Also, the front part of drag link is non stock and all welded up of different non stock parts.
thanks,
Les
Attached Images
  
aotte1 is offline   Reply With Quote
Old 09-26-2015, 10:45 PM   #2
argonaut
Senior Member
 
argonaut's Avatar
 
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
Re: Dana 44 Original Steering Arm

Wow, I've never seen one like that. The lifted steering arms that I have have the same shape as your second picture except that they twist upward instead of downward life the stock ones.
I'm curious to see what it is from?
__________________
Jason M. @argonaut62

1972 K5 Blazer CST, Turquoise
1966 K20 Short Fleet Pickup, Big Ugly
1964 C10 Short Fleet, Gertrude

2001 Porsche 911 Carrera
1996 Ford Bronco XLT
1980 Jeep Wagoneer

2008 Honda CBR1000RR
2005 Honda RC51
1981 Honda CB750C


No dis-assemble Johnny Five! No dis-assemble!
argonaut is offline   Reply With Quote
Old 09-26-2015, 10:49 PM   #3
19silverado77
Registered User
 
Join Date: Nov 2013
Location: Tucson, Arizona
Posts: 167
Re: Dana 44 Original Steering Arm

Yeah should be like the second except raised for a lift. The first I don't know but possibly crossover steer?
19silverado77 is offline   Reply With Quote
Old 09-26-2015, 11:16 PM   #4
enaberif
Registered User
 
Join Date: Jan 2009
Location: Calgary, AB
Posts: 1,181
Re: Dana 44 Original Steering Arm

The first one is completely wrong but that could be a dana44 for something like a Jeep or Ferd.

The second one is the correct one for a truck without a lift kit and when you do have a lift it goes up.
enaberif is offline   Reply With Quote
Old 09-26-2015, 11:38 PM   #5
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: Dana 44 Original Steering Arm

Yeah the one in the 1st pic definitely is not for a GM that I have seen

A Dana 44 from a Ford would be a drivers side center section. I wonder if it might be for a Dodge?

Does the Dana 44 have 6 lug hubs?
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-26-2015, 11:49 PM   #6
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Dana 44 Original Steering Arm

It is 6 lugs and it has chevy full time axle hubs. It came out of a 1978 chevy truck. From looking at it, the steering arm looks like it could have been replaced. The nuts holding it on, look a little chewed up, where as, all the other bolts/nuts look like they have not been touched.

I will replace the steering arm, and drag link assembly.

Will do more research soon, take off cover and see if GM gears inside. The spring pads are correct for Chevy, it has a Chevy K10 sway bar, and the shock mounts look correct too.

thanks for all the info,
Les

Last edited by aotte1; 09-27-2015 at 12:07 AM.
aotte1 is offline   Reply With Quote
Old 09-27-2015, 12:11 AM   #7
sawman
Registered User
 
Join Date: Mar 2015
Location: susanville ca
Posts: 1,170
Re: Dana 44 Original Steering Arm

looks maybe ihc international
sawman is offline   Reply With Quote
Old 09-27-2015, 12:21 AM   #8
enaberif
Registered User
 
Join Date: Jan 2009
Location: Calgary, AB
Posts: 1,181
Re: Dana 44 Original Steering Arm

Quote:
Originally Posted by aotte1 View Post
It is 6 lugs and it has chevy full time axle hubs. It came out of a 1978 chevy truck. From looking at it, the steering arm looks like it could have been replaced. The nuts holding it on, look a little chewed up, where as, all the other bolts/nuts look like they have not been touched.

I will replace the steering arm, and drag link assembly.

Will do more research soon, take off cover and see if GM gears inside. The spring pads are correct for Chevy, it has a Chevy K10 sway bar, and the shock mounts look correct too.

thanks for all the info,
Les
1978 also wouldn't be a dana44 but instead a 10bolt or corporate axle. So I would also be looking at the front diff cover and counting the bolts to see what you really have.
enaberif is offline   Reply With Quote
Old 09-27-2015, 06:06 AM   #9
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,761
Re: Dana 44 Original Steering Arm

Steering arm is correct terminology. '78 could still be a Dana 44. I could be wrong, but I believe all 10-bolt started in or about 1980. But this axle probably didn't start out in a GM(?). Could it be AMC? I always thought they had narrower axles, but they did run the same lug pattern...and who knows what all for various drivetrain components. They were all over the place with parts sourcing. I guess the front is where it was modified to work on a GM. Is the front of the drag link modified or the part in front of it (pitman arm) that is attached to the steering box (sector shaft). Looks like nothing different about how it bolts to the axle, so a simple swap back to correct parts (did you hear that Mr. P.O. Cobblemaster?)
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 09-27-2015, 08:37 AM   #10
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Dana 44 Original Steering Arm

Tim,

Yes, it is the front of the drag link that is modified, it has a front drag link section that looks like a 1964 Dana 44 welded in to the drag link center section.
Will get photo and post later, thinking, thinking, is the incorrect steering arm similar to my 1964 Dana 64. Never really studied it much, just removed. Will look at it too.

Thanks everybody for your help.

Les
aotte1 is offline   Reply With Quote
Old 09-27-2015, 03:07 PM   #11
sawman
Registered User
 
Join Date: Mar 2015
Location: susanville ca
Posts: 1,170
Re: Dana 44 Original Steering Arm

still looks like dana 44 part off a international could be off a 60s truck or scout ll,danas in scouts you could change over easy to fit chevy,i think some you could swap hubs to a chevy 6 lug hub,fit perfectly,chevy/fords/ihc/ect used dana 44s too,could be amc as they used international parts as some internationals had amc motors,
sawman is offline   Reply With Quote
Old 09-28-2015, 06:20 AM   #12
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,761
Re: Dana 44 Original Steering Arm

I'm wondering how your truck is set-up now. The steering changed with the open knuckle axle coming out in '70. Before that the steering box/drag link was totally different. You need the '70-up steering box and drag link to put it all together as factory. What steering box/pitman arm is on yours now? Can I see a picture of this modified drag link to solve my curiosity? Looking t that odd steering arm I'm thinking it could work... and be better for a truck with 4" lift? I mean, when you lift the truck you have to extend the drag link. It looks like this arm will put the mounting point forward so the drag link assembly can be closer to original length
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 09-28-2015, 09:43 PM   #13
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Dana 44 Original Steering Arm

Tim,

I believe you are right that the different steering arm and drag link addition to the 1978 Dana 44, makes it fit a 64' to 66' K10 with a small lift. The first photo below shows the modified drag link. Drag link is pointed in wrong direction in photo, needs to go forward..

Now what I am doing, or going to in the 1964 K10, is the addition of newer axle from 1973 to 1987 to add power steering, disk brakes, and front sway bar. Using CaptainFabs PS conversion bracket, a 1983 K10 PS gear box, and 1978 Dana 44 ( the third photo below show both tac welded and bolted to frame, used a 83' 10 bolt to set up all the geometry, as I did not yet have my super clean AZ Dana 44 yet, wanted Dana 44 as it looks more original then 10 bolt). Also, FYI, the 83 gear box has about 3.5 turns lock to lock.

The second photo shows the Borgeson universal joints and shaft for safety and tighter steering, eliminating rag joint ( expensive).

The forth photo shows the original 1964 dana 44 with steering arm, drag link assembly, and gear box. Kind of hard to see whole drag link as gear box folded back on it. Will take better pictures and post them of original Dana 44 soon.

Putting everything together and making sure it works, before starting restoration.

Les
Attached Images
    

Last edited by aotte1; 09-28-2015 at 10:03 PM.
aotte1 is offline   Reply With Quote
Old 09-29-2015, 07:20 AM   #14
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,761
Re: Dana 44 Original Steering Arm

What they did looks like it did the trick. This has been an interesting thread
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 09-29-2015, 09:11 AM   #15
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: Dana 44 Original Steering Arm

For what it's worth, OPs original arm shown is a late 70s f250 steering arm.
obijuan is offline   Reply With Quote
Old 09-29-2015, 10:18 AM   #16
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Dana 44 Original Steering Arm

Obijuan,
Thanks for the information, would likely be helpful for others who want to put the newer Dana 44 or 10 bolt into a 64 to 66 K 10 with original steering gear box and lift. This would give them a source of parts they could use to easily make this swap.

Will look closer at the front part of the drag link and pitman arm to see if they matches the original 64 ones and post photo later, that way we will have a complete list of parts used.

Thanks,
Les

Last edited by aotte1; 09-29-2015 at 10:25 AM.
aotte1 is offline   Reply With Quote
Old 10-03-2015, 01:24 PM   #17
Tyler1968
Registered User
 
Tyler1968's Avatar
 
Join Date: Sep 2015
Location: Danville,In.
Posts: 12
Re: Dana 44 Original Steering Arm

............
Tyler1968 is offline   Reply With Quote
Old 10-04-2015, 10:38 PM   #18
aotte1
Senior Member
 
Join Date: Oct 2013
Location: lousiville Ky
Posts: 2,637
Re: Dana 44 Original Steering Arm

Follow-up on drag link front piece which was attached to the 1978 Dana 44, it looks the same as the one on the 1964 K10 Dana 44.

The pitman arm also looks the same as the original 64, in configuration/measurement. The shape is a little different, however, it functions the same.

Les
aotte1 is offline   Reply With Quote
Old 01-19-2019, 07:30 PM   #19
1957Napcofan
Registered User
 
1957Napcofan's Avatar
 
Join Date: Nov 2018
Location: Auburn Ca.
Posts: 38
Re: Dana 44 Original Steering Arm

So does anyone know for sure what steering arm is in the picture?
Attached Images
 
1957Napcofan is offline   Reply With Quote
Old 01-19-2019, 08:00 PM   #20
obijuan
Registered User
 
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
Re: Dana 44 Original Steering Arm

I'm still pretty sure it's a 77-79 f250 steering arm.
__________________
1985 k5 396/nv4500/203/205 d60/d70 4.56 42 sx2
1991 V3500 350/4l80/205 60/14 4.10 35 toyos.
obijuan is offline   Reply With Quote
Old 01-19-2019, 08:15 PM   #21
1957Napcofan
Registered User
 
1957Napcofan's Avatar
 
Join Date: Nov 2018
Location: Auburn Ca.
Posts: 38
Re: Dana 44 Original Steering Arm

The F250 arm is more like the Chevy but not as tight of a "C"
Attached Images
 
1957Napcofan is offline   Reply With Quote
Old 01-20-2019, 07:05 PM   #22
b454rat
Senior Member
 
Join Date: May 2004
Location: Binghamton, NY
Posts: 3,453
Re: Dana 44 Original Steering Arm

It looks like its "longer", from b/j to hole. Maybe an aftermarket piece for a lifted truck with no power steering? I have a stock F250 arm somewhere I can get a pic....
b454rat is offline   Reply With Quote
Old 01-20-2019, 08:05 PM   #23
1957Napcofan
Registered User
 
1957Napcofan's Avatar
 
Join Date: Nov 2018
Location: Auburn Ca.
Posts: 38
Re: Dana 44 Original Steering Arm

I spent a few hours looking online to find out what the arm is from but no luck.
1957Napcofan is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:48 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com