The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-18-2017, 07:49 PM   #1
JPsChevy
Senior Member
 
JPsChevy's Avatar
 
Join Date: Nov 2013
Location: Ogden, Iowa
Posts: 266
Nv3500 hyd clutch line part # wanted

Does anyone have a part # or link to a hyd clutch line for an 2006 nv3500. Photos are of my master and slave. I need a 48" line and cannot find one.
Attached Images
  
__________________
Opportunity is missed by most because it is dressed in overalls and looks like work.
- Thomas Edison
JPsChevy is offline   Reply With Quote
Old 05-19-2017, 07:26 AM   #2
bluex
Registered User
 
bluex's Avatar
 
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,820
Re: Nv3500 hyd clutch line part # wanted

Do you want to keep that quick connect style fitting?

When I was researching stuff for my swap I found that the T56 and NV3500 use the same internal throwout bearing. I ordered a fitting and a line from Speedway motors and converted mine to -3AN. The fitting number for the pressure line is 5151396. The line I ordered was 36" but they have several lengths to choose from, its part number is 91031846-3. I also used a remote bleeder kit to try and keep the mess out of the bellhousing area. It worked really well, the number for it is 5151399-12. They have different lengths as well, if you want it longer or shorter.

The link to my swap is in my signature if you want more details or pictures. They also sell braided lines with that quick connect end, just search for a T56 line. They run about $120 though which is why I just went with regular AN stuff. I will have to bleed it everytime I remove the trans but I dont think it will be that big of a deal as the remote bleeding kit made that really easy.

edit:

Heres the 48" braided line with the quick connect end. Its $110 though...
http://www.speedwaymotors.com/McLeod...nch,39998.html

Last edited by bluex; 05-19-2017 at 07:31 AM.
bluex is offline   Reply With Quote
Old 05-20-2017, 05:55 PM   #3
JPsChevy
Senior Member
 
JPsChevy's Avatar
 
Join Date: Nov 2013
Location: Ogden, Iowa
Posts: 266
Re: Nv3500 hyd clutch line part # wanted

Alright so I bought that 48" line and it's a great fit except I cannot find a fitting to adapt it to my master cylinder. I have a Wildwood 260-6579, fitting of it is female along with female on that line.
__________________
Opportunity is missed by most because it is dressed in overalls and looks like work.
- Thomas Edison
JPsChevy is offline   Reply With Quote
Old 05-20-2017, 11:32 PM   #4
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 19,749
Re: Nv3500 hyd clutch line part # wanted

I believe the clutch master has a 1/8" pipe thread. You will need to remove the brass fitting that is currently screwed in the port and replace it with a fitting that has 1/8" pipe on one end and -4AN male on the other end. Speedway should have those fittings as well as other suppliers.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-21-2017, 06:58 AM   #5
bluex
Registered User
 
bluex's Avatar
 
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,820
Re: Nv3500 hyd clutch line part # wanted

According to the spec sheet for that master its 3/8-24 Here is a fitting to -4AN

http://www.speedwaymotors.com/3-8-In...ting,6462.html

This is another option, you might need a set of washers as well.

http://www.speedwaymotors.com/Earls-...ed,146452.html
http://www.speedwaymotors.com/Steel-...olt,32520.html

Heres a kit if you dont want to piece it together

http://www.speedwaymotors.com/Banjo-...-AN,36488.html

Last edited by bluex; 05-21-2017 at 07:06 AM.
bluex is offline   Reply With Quote
Old 05-21-2017, 11:59 PM   #6
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 19,749
Re: Nv3500 hyd clutch line part # wanted

It is best to not have too many pieces when plumbing. This is what I was talking about. Just remove the fitting that is on the master and install this:

http://www.speedwaymotors.com/Longac...ht,282719.html

or this:

http://www.speedwaymotors.com/Longac...g-,283168.html
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 05-22-2017, 07:16 AM   #7
bluex
Registered User
 
bluex's Avatar
 
Join Date: Jun 2004
Location: Spartanburg, SC
Posts: 1,820
Re: Nv3500 hyd clutch line part # wanted

Quote:
Originally Posted by Captainfab View Post
It is best to not have too many pieces when plumbing. This is what I was talking about. Just remove the fitting that is on the master and install this:

http://www.speedwaymotors.com/Longac...ht,282719.html

or this:

http://www.speedwaymotors.com/Longac...g-,283168.html
Thats all well and good, and I agree with using the minimum amount of fittings you can get away with in the system. Again you gave him the wrong info and linked him to two seperate fittings that wont work. The specs for the master clearly list it as 3/8-24. See below:



I linked him to a similar fitting first that will work in his master that is like the ones you linked. The reason I gave him the banjo bolt option is because I couldnt locate a 90* fitting when I did mine and I used the banjo bolt so the line wouldnt have to make that curve.

Not trying trying to be a jerk here, I just dont want him buying something that wont work.
bluex is offline   Reply With Quote
Old 05-22-2017, 09:43 AM   #8
JPsChevy
Senior Member
 
JPsChevy's Avatar
 
Join Date: Nov 2013
Location: Ogden, Iowa
Posts: 266
Re: Nv3500 hyd clutch line part # wanted

I bought the first fitting (per wilwood spec sheet). We'll see if it fits correctly. I appreciate both your help locating fitting. Thanks
__________________
Opportunity is missed by most because it is dressed in overalls and looks like work.
- Thomas Edison
JPsChevy is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com