The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-19-2017, 11:42 AM   #1
demian5
Registered User
 
demian5's Avatar
 
Join Date: Aug 2016
Location: Lake Forest, CA
Posts: 730
FatMat in the doors

Last night I installed some FatMat in my doors. Seems to have made them quieter but they are definitely more solid now when closing.

Next over the holiday weekend ill pull the seat and carpet and do the floor and over the front of the gas tank.

I notice the carpet only goes up so far, so I am thinking ill have to paint the aluminum on the FatMat a flat black where it is exposed.

Was thinking under the kick panels too since I have kick panel speakers.

Anyone have any tips or pointers with the installation areas?

Thanks in advance.
Attached Images
  
__________________
"Work hard, use your vacation days."
1970 C15 GMC Long Bed
1986 C20 Scottsdale (grandpa truck)
2015 Silverado 1500 Crew Cab
1964 Impala SS
1959 Austin Healey 100-6 BN6
demian5 is online now   Reply With Quote
Old 05-19-2017, 12:16 PM   #2
Hotrod1972GH
Registered User
 
Join Date: Mar 2016
Location: Knoxville tn
Posts: 48
Re: FatMat in the doors

The only that about installing matting is it can hole moisture and start rusting door in time
Hotrod1972GH is offline   Reply With Quote
Old 05-19-2017, 01:40 PM   #3
dfwright
Senior Member
 
dfwright's Avatar
 
Join Date: Jan 2009
Location: San Antonio, Texas
Posts: 1,263
Re: FatMat in the doors

If you still have access to where you've put the fatmat in your doors, I'm going to offer you some sage advice. I used fatmat in my doors also -- the exact brand FatMat.

After 9 months to a year, the adhesive failed. I am pretty sure there was a good clean surface in the doors, as I had the bottoms of the doors cut off to replace rusted metal. I cleaned out the inside of the doors, painted them with Eastwood's rust encapsulator and later applied the fatmat.

It may just be that fatmat won't stick to rust encapsulator, I don't know, but I had to go back and use a sealant to re-apply the fatmat inside the door.

I haven't had any issues with the fatmat on the floor of the cab, just the vertical placement in the doors. I would recommend a good 3M adhesive applied to be sure the fatmat stays in place.
__________________
1972 C10 LWB, 350/350
Started deconstruction in May 2009. Post reconstruction maiden voyage, to the shop for professional tuneup was December 2016. Not sure it will ever be "done".

A few pictures of the restoration progress
dfwright is offline   Reply With Quote
Old 05-19-2017, 10:06 PM   #4
jessemthompson
Senior Member
 
Join Date: Nov 2011
Location: Raeford North Carolina
Posts: 535
Re: FatMat in the doors

I would recommend using CLD tiles. You only need 10% coverage and the stuff works well.
jessemthompson is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright 1997-2013 67-72chevytrucks.com