Building the damn yankee - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

windmill · 01-18-2009, 12:00 AM

looks like the blower belt is slippin some, show where the high rpms the boost falls off.

phipp13 · 01-18-2009, 12:46 PM

yes i used a ROTO BORE spotweld cutter to make the holes in my floorpan to do my plugwelds. The pilot hole is.125 thats the same size as the pilot in the roto bore. this works better than a piloted drill bit. the drillbit pulls the pan up a little when it goes thru it and you have to bump it back down.
As for blowerbelt slippage. i believe thats just because the 144 B&M blower has a relitively small capacity.Weiand states that this blower pulls best in the lower rpms. A big blower will pull harder on the top end because they are usually underdriven this little blower is overdriven. i will deffinately make sure my belt tensoin is right, thanks for the heads up. v/r Phipp
phipp

nac593 · 01-20-2009, 11:00 AM

Looks great. Can't wait to see more.

**SactoJim** · 01-20-2009, 12:15 PM

phipp13....gonna be a nice ride and motor makes great power to the rear wheels.

I have a similar setup and had the opportunity to have the motor dynoed before install, but I opted not to....wish I would've. I was curious as to other specs of your motor if you don't mind sharing......carb, cam, static compression.

Someday I need to get mine on a chassis dyno.

thx...

phipp13 · 02-06-2009, 06:51 PM

been a while since i posted my progress. the drivers side is 99% finished WHEWW!! that was a lot of work! thank god the passenger side is not as bad thank god! here are some more pics

lowriden58 · 02-06-2009, 07:01 PM

Looking good

BIG HEAD · 02-06-2009, 07:15 PM

Hey you damn yankee how do the clamps work with the wing nuts? I've never seen them before. Do they work like the clieco clips with out the pliers? The cab is looking good.

tdave00 · 02-06-2009, 10:33 PM

Looks good Mark.

phipp13 · 02-08-2009, 02:23 PM

well the poll is closed on the hood and the members have spoken loud and clear LOL. I've decided to ditch the hood and i have gotten a cowl induction hood. my build is'nt ol skool and that hood is so i feel it would look better on someones ol skool build.

PHAT TONY · 06-06-2009, 12:11 PM

Any updates here? You had a good head of steam going on some nice metal work!

phipp13 · 06-07-2009, 02:04 PM

the damn yankee has been slowed down due to having to repower my 52 ford f1. built ford tuff with chevy stuff. 355 sbc 700R4. I got it because my wife had to have it and the price was right. she'll deffinately run good LOL!!!

72BlckButy · 06-07-2009, 02:25 PM

Even though it's a Ford we need to see what has been keeping you from the Yank, so where's the pics?

my67chevytruck · 06-09-2009, 08:25 AM

updates......

phipp13 · 10-04-2009, 02:29 AM

10/4/09 The Damn Yankee is back under construction!!!! . She got sidelined earlier this year/ spring for other higher priority projects and $$$. the 52 f1 build for my wife, our fishing boat and a very interesting 2001 Honda insight build. check it out @ www.redlightracing.org . now that the coast is clear and everyone is happy ( the misses) i can get back to the mistress. i shook the bushes really hard and out came a set of old skool centerline rims 15x5s and 15x14s, with that set came a set of 29x18.5x15 MT Sportsmans and 26x7.5x15MT's as well. a little box fell off the truck with a pair of QA1 Promastar coilovers. LIFE IS GOOD!!! the ol prostreet has got a second wind!! Now with the last of the big puzzle peices in place i can AND WILL get back to some serious building. more pics will be forthcomming. STAY TUNED

OARNGESI · 10-04-2009, 06:17 AM

Glad to see you back on the truck that insight is pretty cool too

VA72C10 · 10-04-2009, 02:44 PM

Glad it's back underway....you've always had a cool direction for the truck to end up with.

tdave00 · 10-05-2009, 10:05 AM

Looking forward to progress pictures.

phipp13 · 10-08-2009, 07:43 PM

these pics are for 72 blackbeauty . guys don't be haten on me cuz ford makes it.. Chevy shakes it though!

my67chevytruck · 10-08-2009, 09:09 PM

looking forward to the progress on the yankee. The F1 is awesome great work on the misses truck!

VA72C10 · 10-08-2009, 09:10 PM

Looks good man. I for one am not going to hate on you for having a f.......fffff.........fffffff....j/k

Beautiful Ford

allen123 · 10-10-2009, 04:36 PM

Nice build! subscribed

RCbowtie69 · 10-10-2009, 10:27 PM

nice project, looking like you are making headway, as of the ford,these old trucks look good fix up too,soon you will have 2 nice trucks

tdave00 · 10-11-2009, 01:50 PM

I dig the old Fords. Nice job!

72BlckButy · 10-13-2009, 08:14 AM

Nice F1 phipp, that thing is really clean! The sides/rear look so clean...

Spray-Bomb · 10-13-2009, 04:13 PM

Sweet

View Poll Results: louvered hood poll
keep the hood	52	37.96%
ditch the hood for cowl induction	85	62.04%
Voters: 137. You may not vote on this poll

01-18-2009, 12:00 AM	#51
windmill Registered User Join Date: Jan 2007 Location: Sylvania, Alabama Posts: 288	Re: Building the damn yankee looks like the blower belt is slippin some, show where the high rpms the boost falls off. __________________ 72 swb pickup http://i124.photobucket.com/albums/p...k/100_0958.jpg 1967 chevelle ss 1966 mustang getting a l33 ls motor 1969 chevy dump truck 1989 mustang 6.0 ls best time of 1.29 at 5.91 https://www.youtube.com/watch?v=JtbooZoGZmQ

01-18-2009, 12:46 PM	#52
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee yes i used a ROTO BORE spotweld cutter to make the holes in my floorpan to do my plugwelds. The pilot hole is.125 thats the same size as the pilot in the roto bore. this works better than a piloted drill bit. the drillbit pulls the pan up a little when it goes thru it and you have to bump it back down. As for blowerbelt slippage. i believe thats just because the 144 B&M blower has a relitively small capacity.Weiand states that this blower pulls best in the lower rpms. A big blower will pull harder on the top end because they are usually underdriven this little blower is overdriven. i will deffinately make sure my belt tensoin is right, thanks for the heads up. v/r Phipp phipp Last edited by phipp13; 01-18-2009 at 01:00 PM.

01-20-2009, 11:00 AM	#53
nac593 Registered User Join Date: Sep 2007 Location: san diego,ca Posts: 125	Re: Building the damn yankee Looks great. Can't wait to see more.

01-20-2009, 12:15 PM	#54
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Building the damn yankee phipp13....gonna be a nice ride and motor makes great power to the rear wheels. I have a similar setup and had the opportunity to have the motor dynoed before install, but I opted not to....wish I would've. I was curious as to other specs of your motor if you don't mind sharing......carb, cam, static compression. Someday I need to get mine on a chassis dyno. thx... __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

02-06-2009, 06:51 PM	#55
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee been a while since i posted my progress. the drivers side is 99% finished WHEWW!! that was a lot of work! thank god the passenger side is not as bad thank god! here are some more pics Last edited by phipp13; 02-06-2009 at 06:53 PM.

02-06-2009, 07:01 PM	#56
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: Building the damn yankee Looking good __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

02-06-2009, 07:15 PM	#57
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: Building the damn yankee Hey you damn yankee how do the clamps work with the wing nuts? I've never seen them before. Do they work like the clieco clips with out the pliers? The cab is looking good.

02-06-2009, 10:33 PM	#58
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Building the damn yankee Looks good Mark. __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

02-08-2009, 02:23 PM	#59
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee well the poll is closed on the hood and the members have spoken loud and clear LOL. I've decided to ditch the hood and i have gotten a cowl induction hood. my build is'nt ol skool and that hood is so i feel it would look better on someones ol skool build.

06-06-2009, 12:11 PM	#60
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: Building the damn yankee Any updates here? You had a good head of steam going on some nice metal work!

06-07-2009, 02:04 PM	#61
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee the damn yankee has been slowed down due to having to repower my 52 ford f1. built ford tuff with chevy stuff. 355 sbc 700R4. I got it because my wife had to have it and the price was right. she'll deffinately run good LOL!!!

06-07-2009, 02:25 PM	#62
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Building the damn yankee Even though it's a Ford we need to see what has been keeping you from the Yank, so where's the pics? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

06-09-2009, 08:25 AM	#63
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Building the damn yankee updates...... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-04-2009, 02:29 AM	#64
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee 10/4/09 The Damn Yankee is back under construction!!!! . She got sidelined earlier this year/ spring for other higher priority projects and $$$. the 52 f1 build for my wife, our fishing boat and a very interesting 2001 Honda insight build. check it out @ www.redlightracing.org . now that the coast is clear and everyone is happy ( the misses) i can get back to the mistress. i shook the bushes really hard and out came a set of old skool centerline rims 15x5s and 15x14s, with that set came a set of 29x18.5x15 MT Sportsmans and 26x7.5x15MT's as well. a little box fell off the truck with a pair of QA1 Promastar coilovers. LIFE IS GOOD!!! the ol prostreet has got a second wind!! Now with the last of the big puzzle peices in place i can AND WILL get back to some serious building. more pics will be forthcomming. STAY TUNED Last edited by phipp13; 10-08-2009 at 07:54 PM.



Register or Log In To remove these advertisements.

10-04-2009, 06:17 AM	#65
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Building the damn yankee Glad to see you back on the truck that insight is pretty cool too __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

10-04-2009, 02:44 PM	#66
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Building the damn yankee Glad it's back underway....you've always had a cool direction for the truck to end up with. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-05-2009, 10:05 AM	#67
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Building the damn yankee Looking forward to progress pictures. __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

10-08-2009, 07:43 PM	#68
phipp13 THE DAMN YANKEE Join Date: Sep 2006 Location: Southern MD Posts: 551	Re: Building the damn yankee these pics are for 72 blackbeauty . guys don't be haten on me cuz ford makes it.. Chevy shakes it though! Last edited by phipp13; 10-26-2009 at 07:24 PM. Reason: more photos

10-08-2009, 09:09 PM	#69
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Building the damn yankee looking forward to the progress on the yankee. The F1 is awesome great work on the misses truck! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-08-2009, 09:10 PM	#70
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Building the damn yankee Looks good man. I for one am not going to hate on you for having a f.......fffff.........fffffff....j/k Beautiful Ford __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-10-2009, 04:36 PM	#71
allen123 It'll buff out Join Date: Mar 2008 Location: Blanchard,Ok Posts: 1,376	Re: Building the damn yankee Nice build! subscribed __________________ 1972 Chevy c10 swb 2008 CBR600RR Grafitti edition My Build Cody Allen

10-10-2009, 10:27 PM	#72
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Building the damn yankee nice project, looking like you are making headway, as of the ford,these old trucks look good fix up too,soon you will have 2 nice trucks

10-11-2009, 01:50 PM	#73
tdave00 Restoring a 68 SWB Join Date: Jan 2008 Location: Nashville, TN Posts: 1,068	Re: Building the damn yankee I dig the old Fords. Nice job! __________________ My Build Thread: Lucy - My 1968 SWB - Shop Truck Style North Nashville Concrete Contractor

10-13-2009, 08:14 AM	#74
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Building the damn yankee Nice F1 phipp, that thing is really clean! The sides/rear look so clean... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.

10-13-2009, 04:13 PM	#75
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Building the damn yankee Sweet __________________ Just not low enough... ----------------------------- Sinister Killer