|
12-15-2008, 03:01 PM
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: Calumet Oklahoma
Posts: 3
|
Brake upgrade
Its been a while since I built an early chevy Ive got a 67 and want to upgrade to front disc but retain 6 lug and go to power brakes Which 73-87 should I look for, will the suburben or 3/4 ton fit or if I use half ton do they make a 6 lug rotor to fit?
|
|
|
|
12-15-2008, 06:22 PM
|
#2 |
|
Registered User
 
Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: Brake upgrade
From how I understand it, the 6 lug rotor is different. Your best bet is to upgrade to a 6 lug Suburban or 3/4 ton square body. It is the easiest and works out better for the power disc brake system, i.e booster, prop valve etc.
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
|
|
|
|
12-16-2008, 10:34 AM
|
#3 | |
|
Senior Member
Join Date: May 2002
Location: Hammond, WI
Posts: 1,795
|
Re: Brake upgrade
GM never made a 6 lug 73-87 2wd. you would have to use the 5 lug stuff, and have the 5 lug stuff redrilled to a 6 lug.
i would just get a kit from one of the board vendors for the brake parts themselves. as for the booster, m/c, and proportioning valve, anything from a 71-87 should just bolt in. i'd look for something from a 3/4 ton for better stopping power.
__________________
Mike 2001 Dakota R/T - Silver CC - 1 of 1671 •360 w/46RE •392 limited slip 1972 Chevy Suburban - Turquoise/Black 1969 Chevy C/10 - Blue LWB •350 w/ 700R4 •3.73 posi •PS PB A/C - SOLD  Using your turn signal is not "giving information to the enemy" 67-72 FAQ Quote:
Last edited by nightmare; 12-16-2008 at 10:37 AM. |
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
