WA Parting '72 1/2ton 2wd Suburban

[randy500]

Originally Posted by Klumpo

Hello looking for the metal plate with two screw holes that divides and retains driver side rear cargo area panels. Thanks. randie110@aol.com

I think that's there, I will take a pic and send it to you on Tuesday

[pwdcougar]

Originally Posted by randy500

I'm out of town but that piece is in my mind and I will cut the outer panel off and see how it looks and post up

Thanks Randy

Paul

[juddss]

I am interested in upper trim under right rear window above the right rear tire and the curved one behind it that goes toward the hatch. I am also interested in the lower trim behind the right rear wheel. You can text me if you'd like. 315 430 0414

[randy500]

Originally Posted by juddss

I am interested in upper trim under right rear window above the right rear tire and the curved one behind it that goes toward the hatch. I am also interested in the lower trim behind the right rear wheel. You can text me if you'd like. 315 430 0414

Texted pics and sale pending on these parts.

[randy500]

Originally Posted by randy500

I think that's there, I will take a pic and send it to you on Tuesday

Picture sent

[ochre1971]

Speedo needle available?

[randy500]

Originally Posted by ochre1971

Speedo needle available?

Not at this time, I need to go through all my gauges and put together a couple nice clusters, If I get that done anytime soon and have a spare I will PM you.

[randy500]

Originally Posted by 6772king

Yes they are welded to the quarter panels...They are spot welded at the inside of the wheel arch..I would like to be able to drill all the spot welds and reweld them in...I'll try to get some pics this weekend

Here is a crappy pic of the passenger wheelhouse. Its in good shape, no rust or dents noted. Do you want it from the floor all the way to the outer quarter panel skin?

[BaggedBurban]

Originally Posted by BaggedBurban

I will take every plug you have. Please let me know the total shipped to 97080 and I will get you paid up.

Thanks!!!

Just wanted to get an update on how much $ to send your way?

Thanks!!!

[randy500]

Originally Posted by BaggedBurban

Just wanted to get an update on how much $ to send your way?

Thanks!!!

I just took out all the plugs for you today! I only got one seatbelt hole plug. Here is a picture. 16 silver plugs and one clearish seatbelt plug. One of the silver ones is cracked. I have a cab out back I have been cutting on, I will check on getting another seatbelt plug from it.
Send me $22 to randy501@outlook.com and I will get them shipped out to you. Please put a note in paypal what your paying for.

[Cash3481]

Originally Posted by Cash3481

Price on the heat stove and pipe shipped to 67110 please?

Did you decide to not part the motor? Maybe I got missed! Lol

[ryanv70c10]

Looking for the cowl fresh air door which is just above the AC box .

[randy500]

Originally Posted by Cash3481

Did you decide to not part the motor? Maybe I got missed! Lol

Sorry, I forgot to respond to this...I will be using heat stove and riser on one of my trucks.

[randy500]

Originally Posted by ryanv70c10

Looking for the cowl fresh air door which is just above the AC box .

At this time I am keeping most of my A/C parts. I will try to remember you asking for this part once I inventory all my A/C parts. I have a lot of A/C parts but I need to see that I have enough for the trucks I am working on.

[ryanv70c10]

Originally Posted by randy500

At this time I am keeping most of my A/C parts. I will try to remember you asking for this part once I inventory all my A/C parts. I have a lot of A/C parts but I need to see that I have enough for the trucks I am working on.

OK let me know please. Thx

[BaggedBurban]

Originally Posted by randy500

I just took out all the plugs for you today! I only got one seatbelt hole plug. Here is a picture. 16 silver plugs and one clearish seatbelt plug. One of the silver ones is cracked. I have a cab out back I have been cutting on, I will check on getting another seatbelt plug from it.
Send me $22 to randy501@outlook.com and I will get them shipped out to you. Please put a note in paypal what your paying for.

Great thank you. Will you take a USPS money order since I don't use PayPal? If so please message me your address.

Thanks!!!

[frankinstein]

Following up to see if you had any of the hardware to mount the spare tire. And wanted to make sure you received the pay pal funds on the 2 headliner bows.

[randy500]

Originally Posted by frankinstein

Following up to see if you had any of the hardware to mount the spare tire. And wanted to make sure you received the pay pal funds on the 2 headliner bows.

There is no hardware for the spare tire. Yes I got the funds, I decided to take a last minute xmas vacation, I will get your bows shipped today, sorry for the delay.

[randy500]

Originally Posted by BaggedBurban

Great thank you. Will you take a USPS money order since I don't use PayPal? If so please message me your address.

Thanks!!!

Sending PM now.

[CG]

For some reason I was thinking this was a 3/4 ton. I didn't read all the pages, is the chassis available, if so is it a roller? If so what would you want for it?

[randy500]

Originally Posted by CG

For some reason I was thinking this was a 3/4 ton. I didn't read all the pages, is the chassis available, if so is it a roller? If so what would you want for it?

The chassis is still complete. I am using the 2nd body mounts from the frame.

I have a deal working now for rear frame horns and 3rd body mounts, he hasn't paid yet.

I figure the rolling chassis is worth about $500, which is what I will eventually get for the frame cuts, cross members, rear end and disc brake front end. I have a signed off WA title to go with it.

[CG]

Ok sounds good. More than I want to spend though. I have a 72 4x4 project burb ill be putting up for sale in a couple months. I was just thinking if I can't get what I want for it a two wheel drive chassis would be nice to have if I ended up keeping it

[randy500]

Originally Posted by CG

Ok sounds good. More than I want to spend though. I have a 72 4x4 project burb ill be putting up for sale in a couple months. I was just thinking if I can't get what I want for it a two wheel drive chassis would be nice to have if I ended up keeping it

What are you gonna be asking for the project Burb? 1/2 or 3/4 ton?

[CG]

It's half ton now but was originally 3/4. Not sure yet on price ... going to need to add everything up I want to let go with it. Once title is here in my name ill get to figuring

At least 2500 so far

[1fast10]

If your cutting the body up im. In need of the inner roof for driver and passenger doors. Basically area right below the headliner lip to door seal. And the b pillar