Before you post a burb question

[CG]

Consider if its burb/panel specific. This place doesn't get nearly the views the main 67-72 board gets. I see a ton of posts here that ask a question that isn't burb specific, the same question would apply to the trucks too.

If you want answers post those kind of questions on the main truck board. Remember from the back of the (front) doors to the front bumper, the burb Is the same as the trucks.

[LockDoc]

Originally Posted by CG

Consider if its burb/panel specific. This place doesn't get nearly the views the main 67-72 board gets. I see a ton of posts here that ask a question that isn't burb specific, the same question would apply to the trucks too.

If you want answers post those kind of questions on the main truck board. Remember from the back of the (front) doors to the front bumper, the burb Is the same as the trucks.

They need to be mum about it being a Suburban though. If Suburban is mentioned in the thread it will probably get moved here anyway....

LockDoc

[CG]

You are probably right since you are the Team Leader =)

I just feel bad, especially for the newbies that have their stuff sit over here unanswered for days when it would have been addressed right away on the main truck board.

[LockDoc]

Originally Posted by CG

You are probably right since you are the Team Leader =)

I just feel bad, especially for the newbies that have their stuff sit over here unanswered for days when it would have been addressed right away on the main truck board.

Even though I can moderate anywhere now I try to take care of the forums I moderated before, unless it is a spammer or one of the moderators for a specific forum are MIA. I try to check this forum every day but I can't answer some of the modification or specialty parts questions. Good case in point is the "Door Panel Rehab" thread just below. (0 replies) I have painted a few of them so I could answer that type of question, but I have never tried to remove paint and try to save the panel at the same time. I may move it to "Paint and Bodywork" forum it should get more responses there.....

LockDoc