New seats

[04ls1gto]

Scored some new seats for the burb. Needed something with a little more safety the 1971 had to offer. 05 escalade seats and console. Has anyone used 3rd row and made it removable?

[ranger danger]

I've been wanting to do the same with mine only in black. I cant wait to see pics of it all installed!! Especially the console. Mine currently has early 2000's Suburban interior.

[nastety92]

Nice, I'm about to do the same thing. I'm going to pull them from a 2004 Suburban. I'm interested to see how you mount them. If you could take some of the mounting pics once you do it that would be great.

They look like there in really nice shape. Good luck with the install.

Nick

[Bigdav160]

Someone on here did it by swapping out the whole rear floor.

Ranger, I recognize those seats. 93-94 Suburban.

[04ls1gto]

Seats are in decent shape, drivers has wear but for the price I couldn't go wrong. Front and middle seats should be fairly easy as the tracks are flat. I'm sure I can figure out a slick mounting setup for the 3rd row

[nastety92]

Would it be easier to use another set of second row seats in the 3rd row? Those seat brackets mount flat. Just an idea.

[ranger danger]

Has anyone used 3rd row and made it removable?

I believe they are mounted like the Suburbans with counter sunk clips. I think I saw a post that a guy got the clips and counter sank them so they worked the same way. Ill see if I can find it.

[04ls1gto]

I think buckets would be too tall for 3rd row. I was thinking of having them cut the brackets out of the escalade and installing them in plywood with a cross member under it

[ranger danger]

This is the only one I could find.
http://www.67-72chevytrucks.com/vboa...hird+row+seats

[logansdad]

This is from a 1990 k5 I put escalade 3rd row in sorry about the quality of pic

[nastety92]

Have you made any progress with your seats? I'm interested to see how you mount them and what you do with the center console.

[iriereggaeman]

I'm interested in doing the same. My '72 Burban has ~2001 black Chevy Tahoe front and 2nd row seats. I want to add a 3rd row of similar vintage/look seats, but unsure how to mount them. Any suggestions would be great.

[nastety92]

Originally Posted by iriereggaeman

I'm interested in doing the same. My '72 Burban has ~2001 black Chevy Tahoe front and 2nd row seats. I want to add a 3rd row of similar vintage/look seats, but unsure how to mount them. Any suggestions would be great.

Do you have any pictures of your front and 2nd row seats mounted? Especially the rear seats and how much room you have been the two seats with the front seat all the way back.

Thanks,
Nick

[04ls1gto]

Originally Posted by nastety92

Have you made any progress with your seats? I'm interested to see how you mount them and what you do with the center console.

No progress with seats yet, knee deep in rust repair in the floor right now. Hoping to finish rust repair over the next few weekends