1969 Chevy short stepside - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jason7121 · 02-09-2017, 12:10 AM

The fuel tank fit well. I had to put 1" spacers etween mounting flange and frame rail so bottom rail of bed wouldn't smash my fuel lines.

doc74021 · 02-09-2017, 11:09 AM

Okay thanks for the tip.

doc74021 · 02-10-2017, 10:27 PM

Tonight I was able to get the cab off the frame and on a dolly.

doc74021 · 02-10-2017, 10:30 PM

I did not have the frame sandblasted because it looked really good just stripping the old paint off and then I painted it with a high temp chassis paint. I will work on the whole frame this weekend.

doc74021 · 02-10-2017, 10:49 PM

I have looked at thousands of paint jobs and colors trying to decide what I want to do with this truck and my plan is to faux patina it similar to the one in the picture.

Jason7121 · 02-11-2017, 01:14 AM

Wow that will be killer!

doc74021 · 02-11-2017, 10:00 AM

Quote:

Originally Posted by Jason7121

Wow that will be killer!

Another member on here did the same with his truck and it turned out really good. The only thing I'm going to do different is use a red oxide primer rather than black so it looks like rust spots.

doc74021 · 02-11-2017, 07:48 PM

Fed ex showed up today with my gas tank from cpp and my trailing arm bushings and some door hinge pins and bushings. This morning I finished cleaning the frame all up and got it painted. I also got the trailing arms primered and painted. I also got some spacers to put the front tires on to be able to move it.

doc74021 · 02-11-2017, 07:50 PM

More pics

doc74021 · 02-12-2017, 10:12 PM

I was able to get an hour or so in tonight. I worked on putting my cab back together. Got the upper kick panels set in place and got the inner cowl piece set in place with a few spot welds. It was good to see it look like a cab again.

doc74021 · 02-12-2017, 10:14 PM

Another pic

doc74021 · 02-13-2017, 08:06 PM

Did some more spot welding and set the cowl on just to remind me what it looks like lol. I had intended on using disc brakes on the rear but just couldn't justify the cost since I got all new drum brake parts for less than 200 dollars.

doc74021 · 02-19-2017, 11:17 PM

Haven't updated in a bit but I got the rear axles changed out and got the rear end back under the chassis and finished the drop kit on the rear. I got the frame rolling so that's a plus.

doc74021 · 02-22-2017, 10:38 AM

Updating pics.

doc74021 · 02-22-2017, 10:39 AM

More pics.

doc74021 · 02-22-2017, 10:42 AM

Quote:

Originally Posted by doc74021

More pics.

Pics.

doc74021 · 02-22-2017, 10:45 AM

My dash only had one rust spot on it. Unfortunately, it was a pretty good one. I pulled the dash from the donor cab and cut out the piece I needed.

faribran · 02-22-2017, 11:03 AM

Nice work. Keep it up!!!

doc74021 · 02-22-2017, 02:32 PM

Quote:

Originally Posted by faribran

Nice work. Keep it up!!!

Thanks!!

Rod Run · 02-22-2017, 08:25 PM

I loved how nice my CPP gas tank fit in my frame

doc74021 · 02-23-2017, 10:05 PM

Quote:

Originally Posted by Rod Run

I loved how nice my CPP gas tank fit in my frame

I was pretty impressed with it myself.

doc74021 · 03-02-2017, 09:22 PM

I used the dash out of the donor cab to cut a piece and fix mine. I welded it all in and grinded it all down and slapped some filler on it. After sanding I put some primer on it.

doc74021 · 03-02-2017, 09:25 PM

I cut out some sheet metal for my blank off plates and started spot welding them in.

doc74021 · 03-02-2017, 09:29 PM

I finally got my motor. I had plans to rebuild the 350 that came out of the truck but after pricing everything I ordered a 350 from radley Chevrolet.

doc74021 · 03-02-2017, 09:31 PM

Not sure why some of my pics come out sideways and some are normal because I take pics the same way every time.

02-09-2017, 12:10 AM	#26
Jason7121 Registered User Join Date: Jun 2016 Location: Visalia California Posts: 891	Re: 1969 Chevy short stepside The fuel tank fit well. I had to put 1" spacers etween mounting flange and frame rail so bottom rail of bed wouldn't smash my fuel lines.

02-09-2017, 11:09 AM	#27
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Okay thanks for the tip.

02-10-2017, 10:27 PM	#28
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Tonight I was able to get the cab off the frame and on a dolly. Attached Images

02-10-2017, 10:30 PM	#29
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I did not have the frame sandblasted because it looked really good just stripping the old paint off and then I painted it with a high temp chassis paint. I will work on the whole frame this weekend. Attached Images

02-10-2017, 10:49 PM	#30
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I have looked at thousands of paint jobs and colors trying to decide what I want to do with this truck and my plan is to faux patina it similar to the one in the picture. Attached Images

02-11-2017, 01:14 AM	#31
Jason7121 Registered User Join Date: Jun 2016 Location: Visalia California Posts: 891	Re: 1969 Chevy short stepside Wow that will be killer!

02-11-2017, 07:48 PM	#33
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Fed ex showed up today with my gas tank from cpp and my trailing arm bushings and some door hinge pins and bushings. This morning I finished cleaning the frame all up and got it painted. I also got the trailing arms primered and painted. I also got some spacers to put the front tires on to be able to move it. Attached Images Last edited by doc74021; 02-11-2017 at 07:52 PM. Reason: Spelling

02-11-2017, 07:50 PM	#34
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside More pics Attached Images

02-12-2017, 10:12 PM	#35
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I was able to get an hour or so in tonight. I worked on putting my cab back together. Got the upper kick panels set in place and got the inner cowl piece set in place with a few spot welds. It was good to see it look like a cab again. Attached Images

02-12-2017, 10:14 PM	#36
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Another pic Attached Images

02-13-2017, 08:06 PM	#37
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Did some more spot welding and set the cowl on just to remind me what it looks like lol. I had intended on using disc brakes on the rear but just couldn't justify the cost since I got all new drum brake parts for less than 200 dollars. Attached Images

02-19-2017, 11:17 PM	#38
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Haven't updated in a bit but I got the rear axles changed out and got the rear end back under the chassis and finished the drop kit on the rear. I got the frame rolling so that's a plus.

02-22-2017, 10:38 AM	#39
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Updating pics. Attached Images

02-22-2017, 10:39 AM	#40
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside More pics. Attached Images

02-22-2017, 10:45 AM	#42
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside My dash only had one rust spot on it. Unfortunately, it was a pretty good one. I pulled the dash from the donor cab and cut out the piece I needed. Attached Images



Register or Log In To remove these advertisements.

02-22-2017, 11:03 AM	#43
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: 1969 Chevy short stepside Nice work. Keep it up!!! __________________ "

02-22-2017, 08:25 PM	#45
Rod Run Registered User Join Date: Oct 2013 Location: Massachusetts Posts: 777	Re: 1969 Chevy short stepside I loved how nice my CPP gas tank fit in my frame __________________ ______________________ www.northeastrodrun.com

03-02-2017, 09:22 PM	#47
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I used the dash out of the donor cab to cut a piece and fix mine. I welded it all in and grinded it all down and slapped some filler on it. After sanding I put some primer on it. Attached Images

03-02-2017, 09:25 PM	#48
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I cut out some sheet metal for my blank off plates and started spot welding them in. Attached Images

03-02-2017, 09:29 PM	#49
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside I finally got my motor. I had plans to rebuild the 350 that came out of the truck but after pricing everything I ordered a 350 from radley Chevrolet. Attached Images

03-02-2017, 09:31 PM	#50
doc74021 Registered User Join Date: Mar 2013 Location: Nowata, Oklahoma Posts: 150	Re: 1969 Chevy short stepside Not sure why some of my pics come out sideways and some are normal because I take pics the same way every time.

Register or Log In To remove these advertisements.