1994 power bucket seats?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

i_live_in_canada · 04-25-2019, 07:36 PM

I just found a set of bucket seats from a a1994 chevy, I had never seen that year truck with power seats before. does anyone know how to wire them up in a non power seat truck?

thanks, tim

71gmcC15 · 04-26-2019, 07:20 PM

I have a factory six way power driver seat in my 94 chevy. Is the passage seat also power? Not shure how to wire them would be best to get the harness from the truck you took them out of. I'm shure it plugs in somehware or splices in some whare under the dash.

**Palf70Step** · 04-27-2019, 05:04 AM

They just need a 12v source, preferably thru a relay, and a ground. Not sure if the wiring is in the harness already. I thought they were, just not the relays. I no longer have a book showing the schematics for one.

i_live_in_canada · 04-29-2019, 03:32 PM

no I don't think the passenger side is power , ill see if I can wire them up next week

i_live_in_canada · 05-15-2019, 03:48 PM

So I just put in the buckets and the driver side bolts right in but the passenger side needed 3 holes drilled. For the power seat the wiring plugs right in under the dash and everything works

04-25-2019, 07:36 PM	#1
i_live_in_canada Registered User Join Date: Apr 2017 Location: lacrete alberta Posts: 16	1994 power bucket seats?? I just found a set of bucket seats from a a1994 chevy, I had never seen that year truck with power seats before. does anyone know how to wire them up in a non power seat truck? thanks, tim

04-26-2019, 07:20 PM	#2
71gmcC15 Registered User Join Date: Feb 2018 Location: Doland SD Posts: 836	Re: 1994 power bucket seats?? I have a factory six way power driver seat in my 94 chevy. Is the passage seat also power? Not shure how to wire them would be best to get the harness from the truck you took them out of. I'm shure it plugs in somehware or splices in some whare under the dash. __________________ ( second times the charm) 71 gmc c15 307 sbc 373 rear gears positrac sm 465 trans. ( not listed on spid but is original ) 94 chevy k1500 350 tbi 373 rear gears 4l60e one wheel peel. Gutless 07 gmc sierra classic rcsb 4.3 lt 5 speed w/t 04 chevy Silverado 1500 ext cab 5.3 4l60e. 81 chevy Scottsdale k10 muncie sm465 Np208 10 bolt 8.2 ( Old Green) Last edited by 71gmcC15; 04-26-2019 at 07:26 PM.

04-27-2019, 05:04 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,640	Re: 1994 power bucket seats?? They just need a 12v source, preferably thru a relay, and a ground. Not sure if the wiring is in the harness already. I thought they were, just not the relays. I no longer have a book showing the schematics for one. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-29-2019, 03:32 PM	#4
i_live_in_canada Registered User Join Date: Apr 2017 Location: lacrete alberta Posts: 16	Re: 1994 power bucket seats?? no I don't think the passenger side is power , ill see if I can wire them up next week

05-15-2019, 03:48 PM	#5
i_live_in_canada Registered User Join Date: Apr 2017 Location: lacrete alberta Posts: 16	Re: 1994 power bucket seats?? So I just put in the buckets and the driver side bolts right in but the passenger side needed 3 holes drilled. For the power seat the wiring plugs right in under the dash and everything works



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.