Pics of my truck(s) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

griesel72 · 05-06-2003, 05:10 PM

I have been a member here for a month, and have looked at all of your trucks, but haven't got mine on here yet. Well, here they are.

This is my 1972 chevy. It was orginally blue and white, but now is hugger orange. the only original parts are the cab and frame, with an entire goodmark front end, front bumper, roll pan and a aftermarket tailgate, electric front seat and steering wheel from a 94, autometer ultra light gauges (Don't laugh at my rat's nest, i just finished putting them in this weekend) and 8 inch american racing wheels with 255 60's all around (should have gone with 275's, but i guess i'll have to wait until next go around.

It had an orginal 402, which received a total build up with a rough idle cam, flat top hyperutetic (sp) pistons, hei ignition, 750 eld carb and performer rpm intake.

griesel72 · 05-06-2003, 05:10 PM

front view

griesel72 · 05-06-2003, 05:11 PM

another

griesel72 · 05-06-2003, 05:12 PM

dash

griesel72 · 05-06-2003, 05:13 PM

back view

griesel72 · 05-06-2003, 05:13 PM

tire wheel

dabeers · 05-06-2003, 05:16 PM

Awesome looking truck!!!!

Do you have any pics of the engine??

griesel72 · 05-06-2003, 05:22 PM

this is my 69, i bought it from the original owner, and it only has 76000 miles. it is pretty basic with a 350/350 and ps/pb and that is as long as the list of options is on this one. I really like this truck since it is all there and is a solid base for a project.

griesel72 · 05-06-2003, 05:25 PM

actually, dabeers, my disk corrupted with my last pic, and i can't for the life of me find another one, so you'll have to wait until tomorrow to see the heart of this beast

Riveted1 · 05-06-2003, 05:29 PM

Nice truck! I agree w/dabeers, I wanna see the engine!

**old Rusty C10** · 05-06-2003, 06:05 PM

very nice the more i see these restored trucks the more jealous i get LOL

buckola · 05-06-2003, 06:16 PM

SPECTACULAR!!!!
Well done ...not over done

275 question for ya if you don't mind...I just found a set of 275/r60 's in the shop that I used to have on a 95 Sierra. I noticed you had wished you would have opted for them. When I held them up to the front of my 70 GMC it looked like a close fit. Do you think I would have any rubbing problems?

**FRENCHBLUE72** · 05-06-2003, 07:23 PM

Very nice truck I guesss i should get off the computer and work on mine the sun is finally out.

griesel72 · 05-06-2003, 07:46 PM

buckola,

After looking at numerous other trucks with 275/60 15's , i have concluded that it is possibly the best size for a non lowered truck with 8 inch wheels. I have looked at over 15 of these trucks with this size tire, and none of them had any problems. As long as you truck isn't lowered they will fit fine. But , if someone has gotten smart and heated or cut your coils before you got it, this may be another story.

Good Luck

David

Warbones · 05-06-2003, 09:20 PM

Does goodmark have a catalog?

griesel72 · 05-06-2003, 09:38 PM

warbones,

yeah, goodmark has a catalog, but you have to go to their website @

www.goodmarkindustries.com

I wanted as close to original parts as the ones i took off, and goodmark is gm approved for fit and quality.

good luck

david

SEVEND2 · 05-06-2003, 10:29 PM

LOOKS SUPER

Sweet color, Was it Green before or just the fenders?

Just curious..... Approx what did the $$$ Approx for it

Nova_Cobra64 · 05-06-2003, 10:37 PM

Beautiful truck. However, there is only one thing I can be critical about.....I think the exhaust tips would look much better straight out the back seeing that they sort of look awkward going out the side with the roll pan on there.

SEVEND2 · 05-06-2003, 11:25 PM

aye, had to look again, I hate to put this in for such a beautiful truck, I am sure everyone can tear mine apart with things too

I just have to add I would have added the exhaust to come out infront of the rear tires and left the back open since there is a roll pan

Just my humble opinion

griesel72 · 05-07-2003, 10:54 AM

Actually, i really planned on having my exhaust professionally done, this one was built out of about 6 complete exhausts, cut where we needed angles. I just haven't gotten around to taking it to get done.

I'm not really sure how much money went into this one (not sure i want to know) but somewhere around 4,000 with all new parts and engine rebuild. Everything on this truck was done by me and one of you buddies, and it probably cost me more in beer than parts. We even rebuilt the motor and trans and did all the body work.

david

**Yukon Jack** · 05-08-2003, 12:19 PM

That's a very impressive truck. Literally said "wow" when the pics popped up.

Mudder · 05-08-2003, 12:22 PM

Very Nice!!!!

mocwon · 05-08-2003, 01:21 PM

Nice, nery nice. Is that a 60/40 seat, if so what is it out of?

griesel72 · 05-08-2003, 01:55 PM

mocone,

It is a 60-40 split bench out of a 94 chevy silverado It is electric, which is nice if i would just hook it up.

david

70 longbed · 05-08-2003, 02:05 PM

Griesel72,

What do you figure you have in the guages, $$ wise? I would like to get me an extra bezel and start the project myself, but I don't even have the truck back together yet.

05-06-2003, 05:10 PM	#1
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Pics of my truck(s) I have been a member here for a month, and have looked at all of your trucks, but haven't got mine on here yet. Well, here they are. This is my 1972 chevy. It was orginally blue and white, but now is hugger orange. the only original parts are the cab and frame, with an entire goodmark front end, front bumper, roll pan and a aftermarket tailgate, electric front seat and steering wheel from a 94, autometer ultra light gauges (Don't laugh at my rat's nest, i just finished putting them in this weekend) and 8 inch american racing wheels with 255 60's all around (should have gone with 275's, but i guess i'll have to wait until next go around. It had an orginal 402, which received a total build up with a rough idle cam, flat top hyperutetic (sp) pistons, hei ignition, 750 eld carb and performer rpm intake. Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:10 PM	#2
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	front view Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:11 PM	#3
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	another Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:12 PM	#4
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	dash Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:13 PM	#5
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	back view Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:13 PM	#6
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	tire wheel Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:16 PM	#7
dabeers Registered User Join Date: Apr 2003 Location: Syracuse, NE Posts: 33	Awesome looking truck!!!! Do you have any pics of the engine?? __________________ '72 Chev 3/4 T Long Box Stepside

05-06-2003, 05:22 PM	#8
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	this is my 69, i bought it from the original owner, and it only has 76000 miles. it is pretty basic with a 350/350 and ps/pb and that is as long as the list of options is on this one. I really like this truck since it is all there and is a solid base for a project. Attached Images __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:25 PM	#9
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	actually, dabeers, my disk corrupted with my last pic, and i can't for the life of me find another one, so you'll have to wait until tomorrow to see the heart of this beast __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 05:29 PM	#10
Riveted1 Tasty Cakes! Join Date: Apr 2003 Location: Gilbert, AZ Posts: 2,112	Nice truck! I agree w/dabeers, I wanna see the engine! __________________ I'm a little and a lot Ground beef: A cow with no legs. ---------------- '66 Chevy SWB "Penny" '67 Chevy Big Window SWB- aka "Pearl" '72 Burb- "Betty" "It's not a hearse dammit" '99 Chevy Ext. cab Silverado

05-06-2003, 06:05 PM	#11
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,259	very nice the more i see these restored trucks the more jealous i get LOL __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

05-06-2003, 06:16 PM	#12
buckola 1 Wrench / 10 Knuckles Join Date: Sep 2002 Location: Burlington Ontario Posts: 179	SPECTACULAR!!!! Well done ...not over done 275 question for ya if you don't mind...I just found a set of 275/r60 's in the shop that I used to have on a 95 Sierra. I noticed you had wished you would have opted for them. When I held them up to the front of my 70 GMC it looked like a close fit. Do you think I would have any rubbing problems? __________________ 1970 GMC Custom Vortec Heads, Edelbrock Performer Intake, Crane 272 Energizer, Hedman Full Length HTC Headers 2006 Dodge Charger SRT8. 1/4 mile 13.3 1973 Z1 900 Kawasaki ( all original)

05-06-2003, 07:23 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Very nice truck I guesss i should get off the computer and work on mine the sun is finally out. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-06-2003, 07:46 PM	#14
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	buckola, After looking at numerous other trucks with 275/60 15's , i have concluded that it is possibly the best size for a non lowered truck with 8 inch wheels. I have looked at over 15 of these trucks with this size tire, and none of them had any problems. As long as you truck isn't lowered they will fit fine. But , if someone has gotten smart and heated or cut your coils before you got it, this may be another story. Good Luck David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 09:20 PM	#15
Warbones Navel Inspector Join Date: Mar 2003 Location: Wichita, Ks Posts: 1,373	Goodmark Question Does goodmark have a catalog? __________________ 1948 Chevy Aerosedan GONE! I think. 1984 Cadillac Fleetwood Brougham Coupe WANTED 1967 IMPALA 1967 CST C10 Long Bed with a 283



Register or Log In To remove these advertisements.

05-06-2003, 09:38 PM	#16
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	warbones, yeah, goodmark has a catalog, but you have to go to their website @ www.goodmarkindustries.com I wanted as close to original parts as the ones i took off, and goodmark is gm approved for fit and quality. good luck david __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-06-2003, 10:29 PM	#17
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,143	LOOKS SUPER Sweet color, Was it Green before or just the fenders? Just curious..... Approx what did the $$$ Approx for it __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

05-06-2003, 10:37 PM	#18
Nova_Cobra64 Registered User Join Date: Aug 2002 Location: Melville, SK Posts: 1,145	Beautiful truck. However, there is only one thing I can be critical about.....I think the exhaust tips would look much better straight out the back seeing that they sort of look awkward going out the side with the roll pan on there. __________________ 2004 Silverado - Beater 1969 GMC - In progress http://67-72chevytrucks.com/vboard/s...d.php?t=441683 2011 Aveo - Work commuter 2013 Crestliner Fish Hawk 1650 - The reason no work gets done on the project truck. Last edited by Nova_Cobra64; 05-07-2003 at 10:56 AM.

05-06-2003, 11:25 PM	#19
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,143	aye, had to look again, I hate to put this in for such a beautiful truck, I am sure everyone can tear mine apart with things too I just have to add I would have added the exhaust to come out infront of the rear tires and left the back open since there is a roll pan Just my humble opinion __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

05-07-2003, 10:54 AM	#20
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	Actually, i really planned on having my exhaust professionally done, this one was built out of about 6 complete exhausts, cut where we needed angles. I just haven't gotten around to taking it to get done. I'm not really sure how much money went into this one (not sure i want to know) but somewhere around 4,000 with all new parts and engine rebuild. Everything on this truck was done by me and one of you buddies, and it probably cost me more in beer than parts. We even rebuilt the motor and trans and did all the body work. david __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-08-2003, 12:19 PM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	That's a very impressive truck. Literally said "wow" when the pics popped up. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-08-2003, 12:22 PM	#22
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,339	Very Nice!!!!

05-08-2003, 01:21 PM	#23
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Nice, nery nice. Is that a 60/40 seat, if so what is it out of? __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

05-08-2003, 01:55 PM	#24
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	mocone, It is a 60-40 split bench out of a 94 chevy silverado It is electric, which is nice if i would just hook it up. david __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

05-08-2003, 02:05 PM	#25
70 longbed Senior Member Join Date: Oct 2002 Location: Sierra Vista, AZ Posts: 490	Guages Griesel72, What do you figure you have in the guages, $$ wise? I would like to get me an extra bezel and start the project myself, but I don't even have the truck back together yet.

Register or Log In To remove these advertisements.